`cmd(buf)` depends on this since it uses `net_buf_id`, which would alias
multiple pools.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Explicitly ignore the return value of net_pkt_read_u8() as the
net_pkt is validated before being queued for transmit within
modem_ppp_ppp_api_send()
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Fix linking error due undefined tdata entry.
After #72642, tdata could be undefined due to
missing TLS check.
Fixed#74852
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This test explicity enables the POSIX_API which is
not compatible with native_posix.
Let's exclude this target.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This file uses strnlen() but the C library
is not require to expose its prototype unless
_POSIX_C_SOURCE is defined.
So let's define it to avoid an implicit function
declaration warning.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
After enabling interrupts, serial_esp32_usb_irq_tx_enable() calls the
interrupt handler to handle any old events that occurred while interrupts
were disabled. However, this happens in the callers context, so if an
interrupt arrives during the call, it will call the interrupt handler again
resulting in corruption if the interrupt handler is not reentrant.
Fixes#74569
Signed-off-by: Eric Holmberg <eric.holmberg@northriversystems.co.nz>
Problem:
re-plug USB (e.g cy8cproto_062_4343w kit) can cause that
CY43xx device become unresponsive (cy8cproto_062_4343w).
As result we catch ASSERTION FAIL (timeout) on HCI_Reset command.
Fix: added delay (BT_POWER_CBUCK_DISCHARGE_TIME_MS) to be sure
that BT CBUCK regulator to discharge.
Tested on:
cy8cproto_062_4343w, cy8ckit_062s2_ai and cy8ckit_062s2_43012 kits.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Commit add extension of configuration server by large
composition data server.
Mesh Protocol v1.1 specification
4.4.21.1
The Large Composition Data Server is a main model
that extends the Configuration Server model.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Commit add extension of configuration server by private
beacon server.
Mesh Protocol v1.1 specification
4.4.11.1
The Mesh Private Beacon Server model is a main model
that extends the Configuration Server model.
Configuration server and private beacon server shall always
exist together since they have bound states.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
This patch adds a kconfig option `LV_Z_MEMORY_POOL_CUSTOM_SECTION`
which allows to place the buffer the memory pool is backed by into a
section with the label ".lvgl_heap".
Resolves issue: #66494.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Adds a test to show that enabling IPI cascades
(CONFIG_SCHED_IPI_CASCADE=y) can correct an invalid set
of high priority threads on an N CPU system.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Adds a section providing additional information about IPI cascades
to the kernel's SMP documentation.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
When this new Kconfig option is enabled, preempted threads on an SMP
system may generate additional IPIs when they are switched out.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
According to "Arm A-profile Architecture Registers",
Interrupt Controller Software Generaated Interrupt
Group 1 Register (ICC_SGI1R), AFF is 8 bits width
and the mask should be 0xFF but not 0xF.
Cortex_a_r is okay and no need to be fixed.
Signed-off-by: Steven Shen <steven.shen@jaguarmicro.com>
Tested-by: Rex Nie <rex.nie@jaguarmicro.com>
The test `sample.sensor.shell.pytest` fails althought the output
is correct. Time to execution is not enough.
This change extend test execution timeout.
Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>
Document the addition of pipelinks to the modem_cellular.c device
driver and the new modem at shell which uses the pipelinks to
communicate directly with the modems.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Add modem pipelink header to doc group modem_pipelink and add
this group to the modem group.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
This commit adds a missing #ifdef check which prevents building the
'counter_basic_api' test for boards under the following conditions:
* RTC node is defined in device tree (compatible = "st,stm32-rtc")
* RTC node is disabled in device tree (status = "disabled")
* Kconfig "CONFIG_COUNTER_RTC_STM32=n" is specified
This check matches the ones done a few lines above for NXP MCUs.
Without this check, building the test under the conditions listed above
failed with the infamous `undefined reference to '__device_dts_ord_N'`
linker error, because the test attempts to obtain RTC's `struct device`
despite CONFIG_COUNTER_RTC_STM32=n, which ultimately fails because the
RTC driver is not built unless there is an enabled RTC node in DT.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
PAGESIZE definition from legacy.h conflicts with POSIX definition.
Since this definition comes from legacy.h file which is only there
for Cube backward compatibility that we don't maintain in Zephyr,
simply remove it.
Note:
This is a second fix for #73363 which wasn't sufficiently tested.
Legacy file is included in stm32yyxx_hal_def.h headers and actually
removing it generates build errors as we're relying on some of the
definitions. Removing this inclusion is necessary and will be done
but on next release.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
The introductory paragraph had a broken link and was arbitrarily
referencing a couple of files that will be described extensively later.
Instead, just present the content generically.
Fixes#69990.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit increases the size of the main stack for the LLEXT sample
subsys/llext/modules, which otherwise overflows the stack on several
platforms.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Zephyr's thread stack size is not fixed, in most cases we would
need the `thread` argument to obtain the `stack_info`, unless
we are unwinding the irq stack, since that is fixed.
Otherwise we can only safely print the current `mepc` register,
unwinding the esf without the stack info of a thread can
result in undefined behavior.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Pass the current thread to `walk_stackframe()`, so that we do
not need to hardcode `_current` in `in_fatal_stack_bound()`,
which will allow it to reuse the `in_stack_bound()`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The #73619 which fixes the atmel,sam-tc-qdec sensor implementation
introduced agregression on the sample test removing the harness
console. That changed the test to use the default ztest behaviour
which is incompatible with the test outpout. This restore the
harness to the default console value.
Fixes: #74531
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Removes the check for whether or not the kscan kconfig option is set to
change the GUI accordingly.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Removes the wrapper code of the kscan based pointer input device. It was
implemented during the transitioning phase until all intree drivers were
converted to the input subsystem.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Use K_WORK defined. This delayed work is never used with any
other timeout than K_NO_WAIT, so the "delayed" part of it
is never actually needed
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
In case of TCP upload error, zperf would leak a socket when running in
asynchronous mode. The upload work have to release the socket it
allocated in any case, regardless of the session result.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
During socket setup, if one of the setsockopt() calls failed, the
function would return an error w/o closing the socket. That's wrong, as
in case of errors the function should clean up any resources it
allocated, the socket file descriptor is lost otherwise and resources
are leaked.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Kconfig options in those drivers are visible and selectable
to any board/soc when it should not. This makes sure both
depends on proper family.
Fixes#74347
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Cleanup leading spaces found via the following regexes:
r" compatible ="
r"^ "
in:
zephyr/**/*.dts
zephyr/**/*.dtsi
Signed-off-by: Jordan Yates <jordan@embeint.com>
