Both MDIO and Ethernet drivers share the same clock subsystem.
After clock control update in #73807, clock_control_on()
now returns -EALREADY for already initialized clock subsystem.
As a result, ethernet driver won't initialize as needed.
Fixes#74440
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Fix Bluetooth initialization problem caused by PR#72090
for at least ST boards that are using BlueNRG BLE modules.
For more information, please refer to issue #74528.
Signed-off-by: Ali Hozhabri <ali.hozhabri@st.com>
Replace DIV_ROUND_CLOSEST() with a normal division to simplify
operation and avoid redundant handling of signed integer rounding
as the temp value is an unsigned value. The temp value is in nano
precision, so rounding is largely inconsequencial anyway compared
to the comparatively low precision sync prescaler.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The minimum length for the network interface buffer is 2 so that we
can have terminating null there.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The network interface name that is copied to if_req struct might
be missing terminating null.
Fixes#74795
Coverity-CID: 368797
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The zsock_close() is not needed as the fd is always <0 so
the close is never called.
Fixes#74791
Coverity-CID: 366273
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Define the configuration to run the test on the external memory
xspi flash of the stm32h573i_dk disco kit in MemoryMapped Mode
Reading is done with memcopy and erase/write are aborting operation
to send the appropriate command
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Define the configuration to run the code_relocation
application on the external memory xspi flash
of the stm32h573i_dk disco kit in XIP
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Configure the external NOR flash memory to be executable.
Change the board.cmake to add the external loader for
flashing (version that do not mass-erase the external flash).
The address of the external flash is not needed
when flashing a hex file.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Adding the support of the memoryMapped mode
to the flash_stm32_xspi driver through the CONFIG_STM32_MEMMAP
That will allow XiP from the external octo_flash
Erase and Write operation must Abort operations.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add pinmux pinmux_lpuart3_flowcontrol
and pinmux_lpuart3_sleep for HCI-UART.
Add a node m2_hci_uart for HCI_UART.
And add chosen `zephyr,bt-hci =
&bt_hci_uart;`
Update section `Supported Features`,
section `Connections and IOs` and
section `Serial Port` for this feature.
Add section `Fetch Binary Blobs` to
guide how to fetch binary blobs for
BT modules.
add section `Bluetooth Module` for
hardware rework.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Move OA-related TX and RX buffers out from the device data.
Don't define the buffers without the `spi-oa` property. That
saves ~32KB when using generic spi protocol.
Rearrange device data fields to reduce byte holes found with
Pahole.
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
Added force unblock psoc6 bless rx thread to process controller
events (at the end of psoc6_bless_send function)
Internal case: SWINTEGRAT-1767
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
At least for nrf boards, the emulation timer settings generate
reading around -60 degrees. Verify that value with some threshold.
Delay the first reading to prevent 0 at the beginning.
Signed-off-by: Piotr Kosycarz <piotr.kosycarz@nordicsemi.no>
This commit should deal with fixing
various issues on the board's dts
overlay files:
1. PSRAM node was not enabled when
display buffers were stored in
psram and thus, raising linker
error (overflow memory section).
2. Remove MIPI DBI read operations
for the MIPI DBI driver. This is
because not all drivers support
read and most of the cases it does
not have any practical usage.
In addition, this might trigger
conflicts with SPI sensors.
If needed, users should explicitly
enable read operations by defining
an SPI device taking into consideration
conflicts with SPI devices connected
to the SPI bus.
3. Remove enabling the DMA driver.
It should be enabled by default.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
This commit should deal with updating
the way USBD was handling the DMA
engine. Based on the #73803 request
DMA should be handled via the DMA
driver API class and not directly.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
This commit should deal with fixing
the pending length value returned
upon requesting the status of a channel.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
The bt_mesh_cfg_srv structure was removed in ad2fd44d7a, no need to
keep this text here anymore.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Tests showed that mDNS responder needs slightly more stack on certain
platforms, hence increase the default for such case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
After enabled POSIX_API in the sample, not all headers were included in
the build due to #ifdefs around header inclusions. This commit fixes
this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The multicast IPv6 address count was too low to create all
solicited-node multicast address, resulting in an error being
printed on boot:
Cannot join solicit node address ff02::1:ff00:1 for 1 (-12)
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fix two issues with the current configuration:
* The log buffer was too small for the sample, causing part of the stats
printout to be dropped
* The sample set CONFIG_NET_CONFIG_NEED_IPV4 but did not actually set
any IPv4 address, nor enable DHCP, causing the NET_CONFIG
initialization failure.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A few issues were identified with DNS_SD segment buffers, making it work
"by chance" (depending on memory layout):
- size check in dns_sd_query_extract() did not take NULL termination
into account, and in result could overflow provided buffer
- the proto_buf in send_sd_response() can either be used to parse
protocol or domain, depending on number of segments in the query.
It should therefore be large enough to hold either.
- Similarily, instance_buf should be able to hold
DNS_SD_INSTANCE_MAX_SIZE, not DNS_SD_SERVICE_MAX_SIZE.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The multicast IPv6 address count was too low to create all
solicited-node multicast address, resulting in an error being
printed on boot:
Cannot join solicit node address ff02::1:ff00:1 for 1 (-12)
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Commit renames deprecated key refresh field.
It still has to exist to allow backward compatibility
with previous versions when data are restored from
the persistent memory.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Extend Twister configuration for nrf54h20dk/nrf54h20/cpuppr.
Add counter and i2c to the list of supported peripherals.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
The family variable was not initialized and could potentially
be left like that. This could only affect error printout.
Fixes#74796
Coverity-CID: 368799
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The `VERSION` numeric fields are used to construct the `uint32_t`
`KERNELVERSION` and `APPVERSION` values, which only allocates a single
byte for each field.
The field in `app_version.h` is `APP_TWEAK`, not `APP_VERSION_TWEAK`.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Time it takes to "erase" one "page" of rram is too low.
Where getting timeouts.
"erase" of rram is done by writing all the words.
one "page" is 4096 bytes meaning 1024 32bit words.
worstcase time it takes to write one 32bit word from
0x00000000 to 0xffffffff is about 42us, giving 42ms
to write 1024 words.
Signed-off-by: Martin Tverdal <martin.tverdal@nordicsemi.no>
Erasing rram is very similar to partial erase on flash.
So we should use the same multiplier as there, 1.5.
0.1 multipler is way to low and was causing timeouts.
Signed-off-by: Martin Tverdal <martin.tverdal@nordicsemi.no>
This patch is to fix issue #74594
The issue is caused by default stack size 1500 bytes of NET_RX_STACK_SIZE
is to small for ARM64 platform, then the stack of net_rx thread is overflow
and break the net_mgmt thread's stack, as a result net_mgmt thread is
crashed.
So this patch will enlarge all the stack size of net stack threads.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
If func:`bt_hci_cmd_send_sync` return no-zero value, indicate
that `cmd(buf)->status` not zero, in this condition, rsp not
to assign anything, so remove it.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
