Enable PXP rotation for LVGL sample. The PXP is configured to
rotate by 0 degrees, so the original image is left untouched.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable PXP engine with RT1170 EVK. The PXP is set to rotate by 0
degrees in the LVGL sample, for testing purposes.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable display rotation using the NXP pixel pipeline (PXP). The ELCDIF
will only utilize the PXP if a framebuffer equivalent in size to the
screen is provided to display_write. The rotation angle can be
configured via Kconfig at build time.
Fixes#59921
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The NXP Pixel pipeline engine (PXP) is a 2D DMA engine capable of
accelerating display rotation, color space conversion, and limited
2D blending operations. This DMA driver only supports rotation of a
framebuffer, via a set of custom dma_slot values. Only DMA channel 0
is supported or utilized.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The new stack zephyr,cdc-acm-uart driver has two separate init path, one
of which kicks in before the USB stack to start buffering log messages.
This generates a false positive in the build time priority checking,
adding a check to ignore that compatible entirely.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Updated the driver to support low power mode.
Introduced "enable-low-power" flag in device tree to
control(on/off) low power mode.
If flag added in DTS, during sleep BBLED will switch off the LEDs.
Otherwise BBLED will continue the configured blinking pattern on LEDs.
Signed-off-by: Manimaran A <manimaran.a@microchip.com>
Add g1120b0mipi watch display to shields. This shield is currently
supported with the RT595 and RT1170 EVK. The shield contains a 400x392
circular OLED watch display, with an integrated RM67162 display controller
Note that the touchscreen IC can be driven by the FT5336 driver, with the
following changes:
- the FT3267 reports touch data as inverted from the FT5336, so
LVGL must be made aware of this via CONFIG_LV_Z_POINTER_KSCAN_INVERT_Y
- the FT3267 reports the X and Y coordinates as swapped from the FT5336.
To resolve this, the RM67162 driver reports the display as rotated by
90 degrees.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add support for resetting controller at boot, and update FT5336
documentation to indicate that the FT3267 IC is also supported by this
driver.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add support for RM67162 MIPI display controller. This controller
is configured to run in MIPI command/DBI mode, driving a 400x392 OLED
display.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Only set LV_Z_VDB_CUSTOM_SECTION for the RK055HDMIPI4M shield, as it
is only required when using displays that require a large framebuffer.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Fix support for DCS long write command in DSI mcux driver, to enable use
with displays that require this command for full support.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Only setup DPI input from LCDIF if MODE_VIDEO is set, as this
is the the only case where input from the LCDIF would be required to
drive the display. Do not populate the dpi_config structure unless a
reference the the NXP LCDIF device is provided, since this is the output
device providing DPI data.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Fixup support for DCS_LONG_WRITE command in DSI MCUX 2L driver. Since long
DCS commands may benefit from nonblocking I/O, add support for non blocking
transfers to the DSI driver.
This commit also corrects the interrupt number for the RT595, which uses
the DSI_MCUX_2L IP block.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Make DPI mode an optional configuration for the DSI MCUX 2L driver.
DPI mode will only be enabled when the MIPI is attached in video mode,
since this is when DPI formatted packets are expected.
This will enable the DSI driver to also support DBI/command mode, for
displays that use this format.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add DSI video mode flag to MIPI configuration, to indicate to MIPI
drivers that this display uses video mode and must be refreshed
constantly.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Implement a driver for the PWM controller MAX31790. This driver
also implements the RPM mode of the controller, which can
be accessed via setting pwm_flags_t accordingly to macros
defined in the driver specific header.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Fix a build error introduced in 9f02eeadf8, the async pointers are only
available when UARTE_ANY_ASYNC is set.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This change allows users to call pthread_create() with
the pthread_attr_t argument equal to NULL.
If Zephyr is configured with `CONFIG_DYNAMIC_THREAD`, then a
suitable thread stack will be allocated via
k_thread_stack_alloc(). The allocated thread stack is
automatically freed via k_thread_stack_free().
This makes the Zephyr implementation of pthread_create()
compliant with the normative spec.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
With some of the recent work to disable unnecessary system
calls, there is a scenario where `z_impl_k_thread_stack_free()`
is not defined and an undefined symbol error occurs.
Safety was very concerned that dynamic thread stack code might
touch other code that does not malloc, so add a separate file
for the stack alloc and free stubs.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Parse common section and append to cmake args if available when using
--test-item option of west build.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently priv_stacks_noinit is being put onto the flash waiting
to be copied into memory at boot. This is a waste of flash space
as priviledge stacks are initialized at runtime. So mark
the linker section as NOLOAD to save some flash space.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
xt-clang likes to remove any consecutive NOPs more than 8. So
we need to force the function to have no optimization to avoid
this behavior and to retain all those NOPs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Without this, test is run on any target, even if no RTC driver is
supported, leading to unexpected issues.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
STM32F1 series RTC is not compatible with other STM32F1 series,
and it uses a different LL API.
Current implementation of the driver doesn't take this into account,
so we need to explicitly exclude STM32F1 series support until
some changes are made.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Added dts additions for stm32f105xb cpu which is the same as existing
stm32f105xc with less flash.
Signed-off-by: Mathieu Anquetin <mathieu.anquetin@groupe-cahors.com>
Disable peripherals that are not used by default.
Updated the documentation to reflect changes on configured pins, also
fixed the References section wich had none listed.
Signed-off-by: Josep Puigdemont <josep.puigdemont@gmail.com>
Define only once the CRYP_DATATYPE_8B for the stm32h5 serie
This macro is in modules/hal/stm32/stm32cube/stm32h5xx/d
rivers/include/stm32h5xx_hal_cryp.h
Signed-off-by: Francois Ramu <francois.ramu@st.com>
- Add overlay for the esp32s2_saola board to die_temp_polling sample.
- Add aliases for the die_temp_polling sample to esp32s2 dtsi.
Signed-off-by: Hiroki Tada <tada.hiroki@fujitsu.com>
