The bt_cap_initiator_started may be called in cap_stream_started_cb,
even if there is no unicast support. Added a guard for
CONFIG_BT_BAP_UNICAST to avoid calling an unlinked function.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This test fails when icount is disabled, so enable it
See 7bdc621ba9 which disabled icount by
default for this platform.
Signed-off-by: Keith Packard <keithp@keithp.com>
DFU slot sequence depends on the settings backend.
Commit adapts test after changing bsim settings backend.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Commit adds using BabbleSim's settings backend instead of
proprietary one that is based on POSIX files.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
PSA ITS settings area does not belong to Bluetooth.
It should be restored before Bluetooth persistent data.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The XEC clock control driver sample code uses enum indexes to offset to
the desired GPIO CTRL register of the package. These enums are only
used in this example code and are being removed in favor of calculated
indexing into the specific GPIO register memory map.
Signed-off-by: Jeff Daly <jeffd@silicom-usa.com>
The `<zephyr/posix/time.h>` header was unused in `fpga_ice40.c`
so remove it.
This fixes an error about `pthread_attr_t` not being defined.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
* `struct sigevent` is not type-defined
* `union sigval` is not type-defined
* `struct sigevent` must include `sigev_notify_attributes`
For more information, see https://bit.ly/3YfnELI
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
- Updated TFM v1.4 to v1.8
- Delete the TFM "Audit log" service, as it was removed from TFM.
- Delete not used secure service abbreviations.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Add simple TFTP client code using TFTP client library
Initiate connection (IPv4) with optional DNS resolution
Operate get operation then put operation in octet mode
Tested on native_posix
Issue/Discussion #60985
Signed-off-by: romain pelletant <romain.pelletant@fullfreqs.com>
Refcounting is used to track ALH block usage and to
call alh_claim_ownership()/alh_release_ownership() accordingly.
This is however incorrectly done on ALH instance basis, which
means when one instance is released, ownership can be released
even though one ALH instance is still active.
Fix the logic by tracking ALH usage as a global property
which matches the alh_claim_ownership/alh_release_ownership
semantics.
Link: https://github.com/thesofproject/sof/issues/7759
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Ensure coredump.h is properly documented, in particular add missing docs
for coredump_query_id and coredump_cmd_id enums that are part of the
API.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Move the function prototype before declaration of the function itself.
Maybe the prototype could be removed altogether?
Signed-off-by: Florian La Roche <Florian.LaRoche@gmail.com>
Remove print_sys_memory_stats() from hash_map example as it is not used
there at all. For sys_heap make this a static function.
Signed-off-by: Florian La Roche <Florian.LaRoche@gmail.com>
The generated stubs use retval for function return value.
However, this is too generic and is going to collide with
other code. So rename those to be more specific. Note
that the double underscore is intentional to minimize
chance of being shadow variables.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The nRF HW models have been updated to include the following
fixes and improvements:
* RADIO: Handle MAXLEN and other related improvements
* PPI: Added 2 notes about status and shortcommings
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Align all sensor drivers that are using stmemsc (STdC) HAL i/f
to new APIs of stmemsc v2.3
Requires https://github.com/zephyrproject-rtos/hal_st/pull/16
Signed-off-by: Armando Visconti <armando.visconti@st.com>
change pins for the test uart_async_api loopback because the old pins
pb10/pb11 are now used for the I2C loopback test.
Signed-off-by: Marc Desvaux <marc.desvaux-ext@st.com>
AXP192 is a small power management IC, that also
features 5 GPIOS.
Besides GPIO driver this commit also includes needed modifications
in axp192 regulator and mfd driver as LDOIO0 functioanlity
is multiplexed with GPIO0 pin.
Signed-off-by: Martin Kiepfer <mrmarteng@teleschirm.org>
Exit the sample if creation of any of the RX threads failed. Name the
threads to aid in debugging and monitoring of this sample.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Increase the stack size of the two RX threads used in the ISO-TP sample
from 512 to 1024 bytes as the former is too small for some CAN
controller/SoC combinations.
Make both the RX thread stack size and priority configurable via Kconfig.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remove shadow variables found by -Wshadow by using the global recv_ctx
consistently throughout all the internal test helper functions.
Signed-off-by: Martin Jäger <martin@libre.solar>
Add Kconfig to set sleep timeout between empty read attempts in rx thread
for ethernet native posix driver.
Signed-off-by: Nicola Ochsenbein <Nicola.Ochsenbein@husqvarnagroup.com>
Enable LZ_Z_FLUSH_THREAD for display shields and boards that are known
to benefit from this optimization.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable offloading of display_write call to background thread for color
displays. This feature is opt-in, as it may offer significant
performance gains for every display pipeline.
When enabled display_write and lv_disp_flush_ready will be called from a
background thread. This means that while the display driver waits on the
hardware to render the framebuffer, the LVGL rendering thread will not
be blocked.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Many fuel gauge ICs offer a battery cutoff/shipping mode functionality that
cutoff charge from the battery. This is often useful for preserving battery
charge on devices while in storage.
Add battery cutoff support to the fuel gauge API with a generic default SBS
driver showing an example of support in tests.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Added support to connect to an HCI TCP Server. This
allows to do integration tests with other frameworks
that support a virtual hci interface.
Signed-off-by: Victor Chavez <chavez-bermudez@fh-aachen.de>
Rename shadow variables found by -Wshadow
After e38fc6de8a
was merged, this cause CI failures.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
ESP32S3 LuatOS core is a dev board with esp32-s3.
It has similar functions to esp32s3 devkitm, but smaller in size.
Signed-off-by: YuLong Yao <feilongphone@gmail.com>
The existing heap starts at the beginning of SPIRAM which is also occupied
by the WiFi stack if CONFIG_ESP32_WIFI_NET_ALLOC_SPIRAM is enabled. This
results in memory corruption.
Update the linker description to add a _spiram_heap_start symbol and add a
KConfig size option to allow the SPIRAM stack to be correctly located and
sized. Requires matching commit in hal_espressif.
Fixes: 61359
Signed-off-by: Eric Holmberg <eric.holmberg@northriversystems.co.nz>
While the code already includes some provisions to allow running outside
of a git checkout, attempting that right now causes a failure to generate
the XML report, as the JSON report creates a null `zephyr_version` field.
The reason for that is that the original code doesn't set `self.version`
when the subprocess returns a non-zero status (and also doesn't log.)
Instead of having to set `self.version` for all failure cases, initialize
it to the failure state, and log if it hasn't changed from that.
Signed-off-by: Diego Elio Pettenò <flameeyes@meta.com>
This code was added to CI after the `-Wshadow` stack was prepared, so it
was not fixed together with the rest.
Signed-off-by: Diego Elio Pettenò <flameeyes@meta.com>
Export Zephyr image byproducts through `BYPRODUCT_<VAR>` cache
variables.
This allow external tools, such as sysbuild, to read information on
products produced by a Zephyr build from the image CMake cache.
For sysbuild, this means that all byproducts will be added to a phony
build target, which again allow sysbuild itself to depends on target
output and properly describe dependencies between byproducts and their
producing targets.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Remove commented out code which are no longer needed.
Code was made obsolete here and should have been removed at the time:
https://github.com/zephyrproject-rtos/zephyr/pull/24851
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
RCX and RC32K oscillators are not precisely trimmed.
This code allows to measure actual frequency of those two
oscillators.
Device tree binding were extended to specify calibration
interval. This interval (in seconds) is used to periodically
call work that will perform oscillator frequency measurement.
For XTAL32K settle time can be provided in device tree.
After this time (depending on actual oscillator used)
XTAL32K is assumed to be stable and low power clock driven by
XTAL32K is considered OK for precise usage in bluetooth.
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
This adds QSPI controller properties that allow tuning
chip select timings (needed for accessing QSPI at high speed)
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
RC32K/RCX/XTAL32K were present in device tree as fixed-clock.
Now calibration time for RCX and RC32K is added and settle time
for XTAL32K so additional binding is created.
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
Is rsdp_phys is assigned in the loop below code jumps to found label,
otherwise we return and value rsdp_phys is never used after 0
assignment.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This enables -Wshadow to warn about shadow variables on
in tree code under arch/, boards/, drivers/, kernel/,
lib/, soc/, and subsys/.
Note that this does not enable it globally because
out-of-tree modules will probably take some time to fix
(or not at all depending on the project), and it would be
great to avoid introduction of any new shadow variables
in the meantime.
Also note that this tries to be done in a minimally
invasive way so it is easy to revert when we enable
-Wshadow globally. Source files under modules/, samples/
and tests/ are currently excluded because there does not
seem to be a trivial way to add -Wshadow there without
going through all CMakeLists.txt to add the option
(as there are 1000+ files to change).
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
