Added configuration of termination current and trickle voltage
Added option to bypass low voltage charge inhibit
Added option to disable automatic recharge
Signed-off-by: Andy Sinclair <andy.sinclair@nordicsemi.no>
Some log messages could be too noisy, especially if the sensor shell was
used which would call all attr and samples even though just a few are
supported.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
In case of stm32h5 both LL_DBGMCU_EnableTraceClock() and
LL_DBGMCU_SetTracePinAssignment() need to be called in order to properly
configure SWO output.
Select HAS_SWO, so that logging over SWO can be enabled.
Tested with ST's fork of openocd [1].
[1] https://github.com/STMicroelectronics/OpenOCD
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Add the missing IEEE 802.15.4 ownerships that correspond to the recently
introduced IEEE 802.15.4 MAINTAINERS entry.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Update iMX RT boot header to support CONFIG_XIP=n, when the image is not
linked into the flash space. Also, update the boot header to correctly
calculate the flash used size within the boot data header. This field is
used by the iMX boot ROM to determine how much data to copy when running
from RAM, so using the correct size fixes an issue where the ROM would
copy more data than needed.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add _image_ram_size symbol to linker definitions. This symbol
corresponds to the total RAM used by the image.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add module tests for all data types and most of deprecated
functions as well.
Refactor event wainting to expect_lwm2m_rd_client_event() which
does not care about the index, just the order.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When resource data length is set to zero, we still need to
ensure that string reading will return an empty string.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
For now clock can be read and written.
Clock can be set in full iso8601 time format, like 2023-12-24T12:45:56
or by just providing either data or time
Alarms not accessible
Signed-off-by: Kim Bøndergaard <kim.bondergaard@prevas.dk>
The file kconfig.py was originally introduced by myself in:
https://github.com/zephyrproject-rtos/zephyr/pull/5569
The file was a modified version of a Kconfiglib one, so it makes sense
to keep the original license (ISC).
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Will exclude the code for prefix and checksum functionality if none
of the entries on a device make use of these features, saves ~816
bytes when both features are excluded.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
It mirrors the functionality of the vl53l0x driver.
Also removes an assert not needed, as the channel is checked.
Signed-off-by: Daniel Stuart <daniel.stuart14@gmail.com>
Convert the nrf52_bsim board, to use the native simulator
as its engine.
This means some of the functionality the board included
before is now handled by the native simulator, including
the overall program main and CPU/HW scheduling.
Note that this board remains separate from the native_sim
board, even if both use the native simulator.
Also update the nRF HW models component to a new version
which has been converted into an extension for the
native simulator.
After this change, it becames also possible to build
the nrf52_bsim with an embedded C library, and to
use with it the Zephyr POSIX API shim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
To allow reusing the path between boards,
instead of defining it in the board, let's define it in
the arch cmake file.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
CONFIG_COVERAGE has been incorrectly used to
change other kconfig options (stack sizes, etc)
code defaults, as well as some samples behaviour,
which should not have dependend on it.
Instead those should have depended on COVERAGE_GCOV,
which, being the one which adds special code and
temporary RAM storage for embedded targets,
require changes to many features.
When building for the native targets, all this was
unnecessary.
=> Fix the dependency.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
CONFIG_NOCACHE_MEMORY is a valid way of declaring buffers in
nocache regions. Consider them valid in the stm32 SPI driver
nocache check. Also, don't check NULL buffers as the SPI
interface states that such buffers will result in sending
zeroes.
Signed-off-by: Daniel Gaston Ochoa <dgastonochoa@gmail.com>
Increase the default init priority of nct38xx so that they work well
with the default I2C init priority (50).
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
To ease migration of out-of-tree code, re-introduce previous CMSIS
headers that when include generate a warning informing about the
replacement header.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The CMSIS module glue code was part of arch/ directory. Move it to
modules/cmsis, and provide a single entry point for it: cmsis_core.h.
This entry header will include the right CMSIS header (M or A/R).
To make this change possible, CMSIS module Kconfig/CMake are declared as
external, allowing us to add a new Zephyr include directory.
All files including CMSIS have been updated.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Move CMSIS module Kconfig options to a folder, in preparation for CMSIS
core header creation.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
MCUmgr client upload max data payload length was missing
Transport layer CRC + 16bit lenght. Full net buf packet was
possible to send but receiver side it was blocked because there
was not space for calculate CRC and length.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Make J-Link the default runner on this board, keeping Lauterbach TRACE32
runner as an alternative.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Force default stdout encoding to utf-8 as otherwise ram_report/rom_report
may fail to render (ex. in CLion IDE built-in terminal).
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add platform filtering when generating tests for manifest modules.
In the clang workflow, we do select to run only on one platform, so this
needs to be applied as well or we end up building unwanted tests using
the wrong toolchain.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
