Allow the controller to be deinitialized, adding the whole chain of
calls:
- ll_deinit()
- lll_deinit()
- lll_clock_deinit()
in order to be able to turn everything off, including the controller's
refcount of the LF clock.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When bt_disable() was introduced, some of the global variables that
handle key aspects of Bluetooth were not converted to be also
re-initialized every time that the stack was disabled and the enabled
again. This meant that the FIFO and semaphore in the device structure
were not reset whenever the corresponding threads using them were shut
down and then restarted.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit replaces the Zephyr logo for the PDF documentations with
the new registered trademark version.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit replaces the Zephyr logo for the HTML documentations with
the new registered trademark version.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit replaces the Zephyr logo for the README page with the new
registered trademark version.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The 1060 EVK board page links have changed. Update the
documentation to point to the correct links.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Fixes following warning during compilation with llvm:
...
lib/os/mpsc_pbuf.c:428:8: warning: variable 'wrap' set but not used
[-Wunused-but-set-variable]
bool wrap;
^
1 warning generated.
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The ipc_service_get_tx_buffer() has a timeout parameter that can be used
to wait a certain amount of time for a TX buffer to be available.
Unfortunately, for the static vrings backend, an asymmetry
between remote and host exists that makes the usage of this parameter
confusing when the user requests a buffer when no buffers are available
at that time.
When the remote endpoints requests a TX buffer specifying a certain
size and there are no TX buffers available, the function ignores the
parameter and ipc_service_get_tx_buffer() immediately returns -ENOMEM.
The same case on the host endpoint works correctly only when the
specified timeout is <= 15 seconds. All timeouts > 15 seconds simply
returns -EIO after 15 seconds.
This patch is reworking the timeout management trying to behave
correctly in all the cases.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Adding testcases for switching of logging formats at runtime.
Includes testing for log_backend_format_set,
log_format_set_all_active_backends & log_format_func_t_get
routines.
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
<soc.h> has been traditionally been used as a proxy to HAL headers,
register definitions, etc. Nowadays, <soc.h> is anarchy. It serves a
different purpose depending on the SoC. In some cases it includes HALs,
in some others it works as a header sink/proxy (for no good reason), as
a register definition when there's no HAL... To make things worse, it is
being included in code that is, in theory, non-SoC specific.
This patch is part of a series intended to improve the situation by
removing <soc.h> usage when not needed, and by eventually removing it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
<soc.h> has been traditionally been used as a proxy to HAL headers,
register definitions, etc. Nowadays, <soc.h> is anarchy. It serves a
different purpose depending on the SoC. In some cases it includes HALs,
in some others it works as a header sink/proxy (for no good reason), as
a register definition when there's no HAL... To make things worse, it is
being included in code that is, in theory, non-SoC specific.
This patch is part of a series intended to improve the situation by
removing <soc.h> usage when not needed, and by eventually removing it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The soc.c source file did nothing, so just remove it. Remove soc
directory from the include list as well, since there's no header in the
directory that needs to be exposed to the Zephyr build.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
<soc.h> has been traditionally been used as a proxy to HAL headers,
register definitions, etc. Nowadays, <soc.h> is anarchy. It serves a
different purpose depending on the SoC. In some cases it includes HALs,
in some others it works as a header sink/proxy (for no good reason), as
a register definition when there's no HAL... To make things worse, it is
being included in code that is, in theory, non-SoC specific.
This patch is part of a series intended to improve the situation by
removing <soc.h> usage when not needed, and by eventually removing it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
<soc.h> has been traditionally been used as a proxy to HAL headers,
register definitions, etc. Nowadays, <soc.h> is anarchy. It serves a
different purpose depending on the SoC. In some cases it includes HALs,
in some others it works as a header sink/proxy (for no good reason), as
a register definition when there's no HAL... To make things worse, it is
being included in code that is, in theory, non-SoC specific.
This patch is part of a series intended to improve the situation by
removing <soc.h> usage when not needed, and by eventually removing it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
<soc.h> has been traditionally been used as a proxy to HAL headers,
register definitions, etc. Nowadays, <soc.h> is anarchy. It serves a
different purpose depending on the SoC. In some cases it includes HALs,
in some others it works as a header sink/proxy (for no good reason), as
a register definition when there's no HAL... To make things worse, it is
being included in code that is, in theory, non-SoC specific.
This patch is part of a series intended to improve the situation by
removing <soc.h> usage when not needed, and by eventually removing it.
Note that in this case, none of the definitions are used in-tree.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
<soc.h> has been traditionally been used as a proxy to HAL headers,
register definitions, etc. Nowadays, <soc.h> is anarchy. It serves a
different purpose depending on the SoC. In some cases it includes HALs,
in some others it works as a header sink/proxy (for no good reason), as
a register definition when there's no HAL... To make things worse, it is
being included in code that is, in theory, non-SoC specific.
This patch is part of a series intended to improve the situation by
removing <soc.h> usage when not needed, and by eventually removing it.
In this case, the file did not use anything defined in <soc.h>, it only
required access to integer types, e.g. uint32_t.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
SOCFPGA_SYSMGR_REG_BASE is the only definition from soc.h used in tree,
move it to the file using it. Note that this looks suspicious: base
address should come from Devicetree. This patch will allow to drop
soc.h.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
arch/cpu.h was not needed, devicetree.h and sys/util.h are required for
DT API and ARRAY_SIZE().
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
<soc.h> has been traditionally been used as a proxy to HAL headers,
register definitions, etc. Nowadays, <soc.h> is anarchy. It serves a
different purpose depending on the SoC. In some cases it includes HALs,
in some others it works as a header sink/proxy (for no good reason), as
a register definition when there's no HAL... To make things worse, it is
being included in code that is, in theory, non-SoC specific.
This patch is part of a series intended to improve the situation by
removing <soc.h> usage when not needed, and by eventually removing it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
<soc.h> has been traditionally been used as a proxy to HAL headers,
register definitions, etc. Nowadays, <soc.h> is anarchy. It serves a
different purpose depending on the SoC. In some cases it includes HALs,
in some others it works as a header sink/proxy (for no good reason), as
a register definition when there's no HAL... To make things worse, it is
being included in code that is, in theory, non-SoC specific.
This patch is part of a series intended to improve the situation by
removing <soc.h> usage when not needed, and by eventually removing it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
<soc.h> has been traditionally been used as a proxy to HAL headers,
register definitions, etc. Nowadays, <soc.h> is anarchy. It serves a
different purpose depending on the SoC. In some cases it includes HALs,
in some others it works as a header sink/proxy (for no good reason), as
a register definition when there's no HAL... To make things worse, it is
being included in code that is, in theory, non-SoC specific.
This patch is part of a series intended to improve the situation by
removing <soc.h> usage when not needed, and by eventually removing it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
<soc.h> has been traditionally been used as a proxy to HAL headers,
register definitions, etc. Nowadays, <soc.h> is anarchy. It serves a
different purpose depending on the SoC. In some cases it includes HALs,
in some others it works as a header sink/proxy (for no good reason), as
a register definition when there's no HAL... To make things worse, it is
being included in code that is, in theory, non-SoC specific.
This patch is part of a series intended to improve the situation by
removing <soc.h> usage when not needed, and by eventually removing it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The header needs definitions for integer types and size_t, however, it
did not include the necessary headers. Note that this is only required
when not working with assembler.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
<soc.h> has been traditionally been used as a proxy to HAL headers,
register definitions, etc. Nowadays, <soc.h> is anarchy. It serves a
different purpose depending on the SoC. In some cases it includes HALs,
in some others it works as a header sink/proxy (for no good reason), as
a register definition when there's no HAL... To make things worse, it is
being included in code that is, in theory, non-SoC specific.
This patch is part of a series intended to improve the situation by
removing <soc.h> usage when not needed, and by eventually removing it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
<soc.h> has been traditionally been used as a proxy to HAL headers,
register definitions, etc. Nowadays, <soc.h> is anarchy. It serves a
different purpose depending on the SoC. In some cases it includes HALs,
in some others it works as a header sink/proxy (for no good reason), as
a register definition when there's no HAL... To make things worse, it is
being included in code that is, in theory, non-SoC specific.
This patch is part of a series intended to improve the situation by
removing <soc.h> usage when not needed, and by eventually removing it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
<soc.h> was included because some CMSIS helpers (__DMB/__ISB) were
needed. In ARM SoCs, inclusion of CMSIS headers depends mainly on how
HALs decide to do it, being usually an inefficient and fragile include
chain. Note that on ARM64 we're in a better position, as those are
defined in-tree.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
<soc.h> has been traditionally been used as a proxy to HAL headers,
register definitions, etc. Nowadays, <soc.h> is anarchy. It serves a
different purpose depending on the SoC. In some cases it includes HALs,
in some others it works as a header sink/proxy (for no good reason), as
a register definition when there's no HAL... To make things worse, it is
being included in code that is, in theory, non-SoC specific.
This patch is part of a series intended to improve the situation by
removing <soc.h> usage when not needed, and by eventually removing it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The NS16550 UART base address was hardcoded in <soc.h> headers. This
bypasses the console choice defined in Devicetree. Hardcoded hardware
choices must be avoided now that DT is in place.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new selectable Kconfig option to decide wether the device driver
is a MMIO device or not. Previous to this patch, the decision was maded
based on the existence of a definition in <soc.h>. The design was
fragile, as code compiled anyway if the definition was not present.
All platforms/boards that had the definition in <soc.h> select the
Kconfig option in their respective defconfig files.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
to NOT_SET, in case the default is changed.
Add print of failing error code for psa_hash_compute().
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
This file defines IRQ numbers that are already defined in the MDK
headers, so there is no need of including it.
This will later allow us to remove it from the HW models.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Since output can be cumstomized, so slightly change the output format,
so that twister can parse the output and collect the passrate correctly.
Signed-off-by: Guo Lixin <lixinx.guo@intel.com>
