This commit sets an initial value of 0 for the `elapsed_ms` variable,
which may be used uninitialised when the while loop below does not
execute.
This fixes the "‘elapsed_ms’ may be used uninitialized" warning
generated by the GCC 12.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit removes the NULL check on the idle thread array
(`idle_tid`) because it is statically declared and will never be NULL.
This fixes the "comparison will always evaluate as ‘false’" warning
generated by the GCC 12.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Update w1 drivers to use DT_HAS_<compat>_ENABLED Kconfig symbol
to expose the driver and enable it by default based on devicetree.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that clock control drivers are enabled based on devicetree we
need to remove any cases of them getting enabled by Kconfig.defconfig*
files as this can lead to errors.
Typically the Kconfig.defconfig* will blindly enable a sensor and not
respect the devicetree state of the clock control. Additionally we
can get problems with prj.conf/defconfig getting incorrectly overridden.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that clock control drivers are enabled based on devicetree we
can remove any cases of them getting enabled by *defconfig and
proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Update dac drivers to use DT_HAS_<compat>_ENABLED Kconfig symbol
to expose the driver and enable it by default based on devicetree.
We remove 'depend on' Kconfig for symbols that would be implied by
the devicetree node existing.
Signed-off-by: Martin Jäger <martin@libre.solar>
This PR adds a KConfig option that allows moving
all .noinit content related to wifi a net stack into external
ram. This free dram space to application.
Linker script files are also modified so that the content
are mapped into external ram.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This commit adds the PECI alias and set the PECI node's status to okay.
With this change, we can build the PECI sample with npcx7m6fb_evb and
npcx9m6f_evb to test the PECI driver.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Escape quotes provided in extra arguments on the command line.
example: ... -x "CONFIG_COMPILER_OPT=\"-fanalyzer\""
Fixes#46382
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add mps2_an521.overlay so that the example in the README.txt will
actually build. Update README.txt to document needing to have
'zephyr,tracing-uart' property set under chosen node in devicetree.
Fixes#48416
Signed-off-by: Kumar Gala <galak@kernel.org>
Add test summary after all test suites finish running.
The summary can be one-line or verbose, which is configured
with CONFIG_ZTEST_VERBOSE_SUMMARY. The one-line summary covers
overall suite stats. The verbose summary covers each test
function within the suite besides the one-line summary.
Signed-off-by: Ming Shao <ming.shao@intel.com>
Support verbose or one-line summary at test suite level.
Support verbose or no output at test function level.
Totally 4 combinations configurable:
- function verbose + suite verbose
- function verbose + suite oneline
- no function output + suite verbose
- no function output + suite oneline
Signed-off-by: Ming Shao <ming.shao@intel.com>
Update i2c drivers to use DT_HAS_<compat>_ENABLED Kconfig symbol
to expose the driver and enable it by default based on devicetree.
We remove 'depend on' Kconfig for symbols that would be implied by
the devicetree node existing.
Signed-off-by: Kumar Gala <galak@kernel.org>
Update custom test_main example to use updated ZTEST API so
test can either be listed or ran appropriately.
Signed-off-by: Al Semjonovs <asemjonovs@google.com>
This configuration does not work on some variants (simulator), reduce
the number to something that work on all variants.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This power down bit of eSPI module is loacted in the bit 7 of PWDWN_CTL6
register rather than the bit 4. This commit fixs the incorrect setting.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Add support in Bluetooth Host to enable Periodic Advertising
ADI support feature when supported in the Controller to
include ADI in Periodic Advertising AUX_SYNC_IND PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is a follow-up to commit 63d6cfd654.
Use a bit mask to store information about channels that need to be
driven by the PWM peripheral instead of inspecting the `seq_values`
array each time.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Update hal_ti module to pull improvements on how required definitions
are passed to the build.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Adding the yaml files to sub-applications to avoid bitrot and
specifying the main applications with remote harness instead of
build_only.
Fixes#47613
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
Base address for PRCI is not used anywhere in the tree for this
platform. Again, if ever used, this needs to come from DT.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
There is no GPIO driver for such platform, and if it existed, all this
information should be provided in Devicetree (as other platform drivers
like UART do).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- zephyr/toolchain.h is not needed
- gd32vf103.h is not needed (no CMSIS here)
- undefinition not needed, HAL is now patched with a prefix for this
definition.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
SystemInit is declared in gd32vf103.h. Include it instead of relying on
indirect soc.h includes.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
As we phase out label properties from devicetree the devicetree
node may not have a label so utilize DEVICE_DT_NAME instead
which will use a label if it exists and the node name if not.
Signed-off-by: Kumar Gala <galak@kernel.org>
According Mesh Spec 1.0.1:
Upon receiving and successfully authenticating to
Secure Network beacon for a primary subnet whose
IV Index is 1 or more higher than the current known IV
Index, the node shall set its current IV Index and its
current IV Update procedure state from the values in
this Secure Network beacon.
Look like test_iv_index.c:81
``` C
(bt_mesh_net_iv_update(TEST_IV_IDX + 1, BCN_IV_IN_IDLE));
```
This test case already exists, but the wrong testcase
to test wrong code.
Move `is_iv_recovery` into `bt_mesh_net_iv_update`.
First check whether it is IV recovery, and then carry out
the subsequent IV normal update procedure.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Put ace headers alongside other headers. The contents of ace_v1x-regs.h
will be moved around to new headers being added across all series and
SoCs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Instead of enabling WOVCRO clock based on the SOC, use a configuration
to indicate support, so that each platform can specify if WOVCRO is
supported or not.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
If test for WOVCRO clock fails, code shouldn't just choose WOVCRO clock
as the lowest frequency one, but LPRO instead.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Move af_packet_ipproto_raw tests to use new ztest API
TEST=twister -T tests/net/socket/af_packet_ipproto_raw/
Signed-off-by: Hu Zhenyu <zhenyu.hu@intel.com>
