Remove extra_args that set specific driver Kconfig symbols. This
will happen by default now since the drivers will be enabled if
they exist and are enabled in the devicetree.
Signed-off-by: Kumar Gala <galak@kernel.org>
Merge I2C, & SPI dac build tests and cleanup some
unneeded extra_args that enabled drivers. That will get
done via Kconfig defaults & devicetree now.
Signed-off-by: Kumar Gala <galak@kernel.org>
mdm_hl7800_log_filter_set uses LOG_MODULE_NAME which
is undefined.
log_source_id_get() will fail to get the correct source id.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Add an entry for uoscore-uedhoc module to the MAINTAINERS.yml file and
assign myslef and StefanHri as maintainers.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Introduce uoscore-uedhoc repository, providing OSCORE and EDHOC
libraries as a new Zephyr module.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Instead of relying on selected ciphesuite to enable mbed TLS EC configs,
add separate config entries to enable them. This allows to use EC
functionality w/o TLS/DTLS enabled.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
psa_crypto_cipher.c includes an internal header with <>, causing
complication errors in Zephyr (header not found).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit modifies the twister workflow to include the module test
results in the unit test report.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
All the of the ITE it8xxx2 devicetree compatiables are of the form
ite,it8xxx2-<DEV>. However the PECI device was ite,peci-it8xxx2,
rename the compatiable to match the pattern used everywhere else.
Signed-off-by: Kumar Gala <galak@kernel.org>
Remove the Kconfig option for configuring the maximum value of the CAN-FD
Data Length Code in order to ensure standard compliance.
Allowing users to configure the max DLC allows the user to save a number of
bytes per CAN frame in RAM, but it also renders the Zephyr CAN-FD
implementation non-compliant with the CAN-FD standard.
There are no guarantees that a Zephyr CAN-FD node will not receive a CAN
frame with a DLC higher than the Kconfig limit, which opens up for all
sorts of bugs when trying to handle received CAN-FD frames.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The CMP, TMU and SHRTIMER modules were not compiled. Add them now that
GD32E50X series support is being added (this SoC has such units).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Add some compile definitions necessary for the gd32e50x HAL and select
default crystal clock.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
When the CONFIG_GPIO_GET_CONFIG is set, even if the driver does not
provide the pin_get_config function, it is supposed to return -ENOSYS
error code (see zephyr/include/zephyr/drivers/gpio.h)
The testcase should accept this code and PASS.
(ENOTSUP is not the right value to check).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The stm32F1x serie does not provide the pin_get_config function,
Even if the CONFIG_GPIO_GET_CONFIG is set, the -ENOSYS error code
is returned by the z_impl_gpio_pin_get_config().
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Define a pin structure to carry the pin configuration elements
such as push/pull, opendrain, input/output, high/low.
This structure will give the gpio_flags_t to the gpio_stm32_get_config.
Only the stm32F1x serie does not provide the pin config get function.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
In the stm32 gpio driver, the gpio_stm32_get_config function
also returns the pin state HIGH or LOW) to match gpio_pin_get_config
This is valid with CONFIG_GPIO_GET_CONFIG.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
actinius_icarus_common-pinctrl.dtsi contained entries for uart0 that are
not common for all revisions.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Align the default RAM allocation to be according to that of the
nRF9160DK by reducing the reserved SRAM for the modem lib.
Signed-off-by: Alex Tsamakos <alex@actinius.com>
Change the documentation of the `sim-select` DT binding to explain
the proper use of the configuration property using enum values.
Signed-off-by: Alex Tsamakos <alex@actinius.com>
Revert back to using `GPIO_OUTPUT_*` instead of `GPIO_OUTPUT_INIT_*`
as the later does not including enabling the GPIO output.
Signed-off-by: Alex Tsamakos <alex@actinius.com>
Refrain from including `board.c` in secure targets as a workaround for
SPM having the GPIO driver disabled.
Signed-off-by: Alex Tsamakos <alex@actinius.com>
