The clock bus of the specific SPI module (FIU) is under FIUCLK. The
previous commit misconfigured it to APB3_CLK. Although it won't
cause any issue as the driver doesn't use it. It should be fixed to
prevent confusion when reading the datasheet.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Add GoodDisplay GDEW042T2 with fast partial refresh. Based on
configuration from GoodDisplay's Arduino example.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
The UC8176 doesn't automatically copy writes to the buffer containing
the old SRAM contents. In this case, we need to manually copy data to
the back buffer.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Some custom refresh profiles need to set the PLL and VDCS
registers. Add them as optional DT properties.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Add support for overriding display LUTs in the UC81xx driver. This
makes it possible to use different LUTs for the full and partial
refresh profiles.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Add a separate profile for partial refreshes. This makes it possible
to specify a separate refresh configuration for partial and full
refreshes.
The driver now transitions to full refresh mode when blanking is
turned on. It transitions back to partial refresh mode when there is a
write while blanking is off.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Introduce the concept of refresh profiles which are specified as a
child node in the device tree. This makes it possible to use different
overrides for different types of refreshes (full/partial).
The only profile that is currently supported is the "full" profile.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Some commands need to signal that the chip is busy using the busy
pin. We generally need to wait for the chip to exit the busy state
before issuing a new command. Call uc81xx_busy_wait() from
uc81xx_write_cmd() just before issuing a new command instead to avoid
sprinkling wait calls everywhere.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
The UC81xx driver prints a debug message on every iteration of its
busy wait loop. This makes debug output almost useless. Modify this
code to print a debug message on entry and exit instead.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
add user data for adu callback, which helps in passing
socket and relevant application parameters.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Drop the empty pinmux.c file for sam4e_xpro. The board has pinctrl
definitions and this file just has an empty function, no need to keep
it.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Adds vendor name helpers to access generated macros based on matching
entries in the vendor prefixes file.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Adds vendor name and existence macros for all compatibles of a node that
match an entry in the vendor prefixes file.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Adds a new compat2vendor lookup table that maps compatibles to vendor
names, constructed from the vendor prefixes file. This approach is a
more scalable alternative to adding a vendor name property to devicetree
bindings, as was previously proposed.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
This reverts commit fdd47f39be.
After v4.4.1, write-block-size is no longer needed to be 32-bytes
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Update all esp32 socs to include esp_timer early init, which
is part of hal v4.4.1 update.
Update reboot function to meet proper SoC init/deinit peripherals.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
west.yml: update hal_espressif to use latest v4.4.1 updates.
This change needs to be insync with esp32c3 timer changes, otherwise it
breaks it.
drivers: timer: update esp32c3 systimer to meet API changes.
Systimer API was refactored in hal v4.4.1, which
requires updates in esp32C3 systimer. Timer behavior is maintained
as is.
mcpwm: add v4.4.1 include reference, which was refactored as well.
driver: spi: esp32: update internal structs to meet API changes.
cmake: updated esp32 board to use HAL_ prefix as from west blobs
requirement.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Supplicant start call is part of esp_wifi_init, which
would become duplicated if kept in here.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Updates ESP32 to use hal interrupt funcions provided by 4.4.1
release. Removed redefinition of interrupt FLAGS.
This also includes interrupt definitions for ESP32C3
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Add device specific clock initialization, which uses
reset reason cause information to proper define
peripherals clock state.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
NSEC_PER_MSEC should be defined along with the rest of the
per-sec macros in sys_clock.h. Currently, it's defined
multiply in a few separate locations.
Signed-off-by: Christopher Friedt <cfriedt@fb.com>
When shell was used as a log backend it did not enabled log_output
module used for string formatting. Adding missing dependency.
Original commit (b0072e1cea) was
reverted, reappling.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
log_output.c was added in two places: unconditionally when logging
is enabled and when CONFIG_LOG_OUTPUT is set. Cleaning up to add
source file only when module is enabled.
Original commit was reverted. Now it is reapplied.
Original commit:af31cad8366c82a35e8749e6488252e394ce158d
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This patch is to add Cadence QSPI NOR flash device tree element
for the Cadence QSPI NOR flash driver bringup
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
This patch is to increase kernel VM size to 1.5MB and
memory size to 2MB to ready for future driver bring up.
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
To reduce energy consumption for accel and gyro frequencies 52 Hz and
lower, disable high performance mode by default.
It doesn't affect for higher frequencies.
Signed-off-by: Adrian Wojak <adrian.wojak@grinn-global.com>
-In order to allow non regression of trigger mode in CI, add
a dedicated configuration for this mode
-Fix regex
-Use a filter on compat rather than using a fixture
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
1. Use #ifdef around CONFIG_HTS221_TRIGGER instead of #if
2. According to binding (which is in line with datasheet), name of the pin
used for trigger mode should be drdy, not irq.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
According to RM the daisy chain mask should include both bit 0 and 1, not
only bit 0.
Updated bitmask accordingly
Signed-off-by: Antonio Tessarolo <anthonytexdev@gmail.com>
WealianLiao is unable to support Zephyr for npcx chip for the
foreseeable future. Remove him from the CODEOWNERS file.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
WealianLiao is unable to support Zephyr for npcx chip for the
foreseeable future. Remove him from the MAINTAINERS file.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
