Additional uncontrolled delay for transmitting segack affects throughput
of the segmented messages. Though the best throughput can be achieved
with the smallest allowed values, move them to Kconfig option so that
the segack delay can be controlled by a user.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
When CONFIG_KERNEL_COHERENCE=y, it's illegal to place shared
data(like ztress_context_data in this test case) on the stack,
because that memory is incoherent with respect to other CPUs
in the system.
In this specific case, it will cause PC register to load invalid
handler function pointer and crash the Xtensa processor.
Make it static.
Signed-off-by: Ming Shao <ming.shao@intel.com>
Logging through winstream can miss logs when log output is
fast. The mem_blocks test suffer from this on CAVS platforms.
Add CAVS config overlays to use HDA logging instead.
Signed-off-by: Ming Shao <ming.shao@intel.com>
Adds a note to the release notes on a bug fixed in mcumgr whereby a
race condition existed that could have gave a false short process
list if a process state changed whilst the list function was running.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Now that clock control drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Signed-off-by: Kumar Gala <galak@kernel.org>
Update dai drivers to use DT_HAS_<compat>_ENABLED Kconfig symbol
to expose the driver and enable it by default based on devicetree.
Signed-off-by: Kumar Gala <galak@kernel.org>
Update lora drivers to use DT_HAS_<compat>_ENABLED Kconfig symbol
to expose the driver and enable it by default based on devicetree.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that interrupt controller drivers are enabled based on devicetree
we can remove any cases of them getting enabled by *.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that interrupt controller drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Signed-off-by: Kumar Gala <galak@kernel.org>
Update intc drivers to use DT_HAS_<compat>_ENABLED Kconfig symbol
to expose the driver and enable it by default based on devicetree.
We remove 'depend on' Kconfig for symbols that would be implied by
the devicetree node existing.
Signed-off-by: Kumar Gala <galak@kernel.org>
This allows to disable UART peripheral driver and still be able to build
correctly (header is not visible when LPUART driver is not enabled).
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
So far systick frequency was duplicated in 'sysclk' DT nodelabel's
'clock-frequency' property and in per SoC SYS_CLOCK_HW_CYCLES_PER_SEC
default value. Set the latter based on DT configuration.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
When a GPIO is 1 and port_set_bits_raw_and_verify function does
not set that bit, it will still be 1. So calculate the expected
value only by the parameter of port_set_bits_raw_and_verify is
not enough. A proper way is to clear all the GPIO bit fist and
then do the test.
Fixes: #49714
Signed-off-by: Hu Zhenyu <zhenyu.hu@intel.com>
Now that Wifi drivers are enabled based on devicetree we can
remove any cases of them getting enabled by *.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that Wifi drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Signed-off-by: Kumar Gala <galak@kernel.org>
Update Wifi drivers to use DT_HAS_<compat>_ENABLED Kconfig symbol
to expose the driver and enable it by default based on devicetree.
Signed-off-by: Kumar Gala <galak@kernel.org>
Make extended advertiser as deafult advertiser for
general and persistent bsim BLE Mesh tests.
Leave legacy advertiser as default advertiser for
low latency bsim BLE Mesh tests.
The legacy advertiser provides quite poor performance.
Even more, it is not fully compatible with specification
since might spur more frames occasionally then requested.
This is fundamental issue since it cannot stop an advertisement
in exact time. The extended advertiser doesn't have such problem.
However, it is not well tested yet. Since extended advertiser is
not experimental anymore in both controller and host this is
the right time to make ext advertiser as a default in Mesh either.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Change in the MCU/interrupt handler model
which enables using the new nrf52 HW models irq controller
level interrupts.
Note that this change requires the updated HW models which
provide the new level based interrupts API.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Use the latest nRF HW models which provide level
interrupt support in the interrupt controller.
Add an EGU peripheral stub, and have other minor changes.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This change introduces test coverage for IEEE 802.15.4 AF_PACKET support
and IEEE 802.15.4 security operation.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
The IEEE 802.15.4 security implementation had several severe bugs:
* A regression introduced by 6ea225e34a
(net/ieee802154: Finally removing usage of ll_reserve in L2)
introduced a buffer leak (reading/ writing beyond the end of the frame
buffer) and led the security implementation to malfunction in all but
the simplest cases (i.e. encryption/authentication: none).
* Encryption vs. authentication modes were not properly implemented i.e.
encryption was always active even if not required by the chosen
encryption level.
* Nonce endianness was not correctly handled on decryption of packets
which led to authentication failures.
* The frame counter was not checked for overflows.
* The encryption output buffer limit (out_buf_max) was not correctly set.
* Setting an invalid key mode led to a NULL pointer deref.
* We use CCM rather than CCM* as crypto.h does not provide access to
CCM*. CCM does not support encryption-only operation, though. This
condition was not checked by the code.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
This change makes the packet socket and ieee802154 l2 drivers aware of
AF_PACKET sockets, see https://github.com/linux-wpan/wpan-tools/tree/master/examples
for examples which inspired this change.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
Some IEEE 802.15.4 specification constants must be made available in
userspace as they will be needed to use IEEE 802.15.4 RAW/DGRAM sockets
which will be introduced in this changeset.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
This change applies the newly introduced consistent MTU definition to
all IEEE 802.15.4 radio drivers.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
Zephyr IEEE 802.15.4 drivers and L2 stack use the same constant names
for different MTU definitions. The intent of this change is to introduce
a consistent MTU definition which can be used everywhere in zephyr to
avoid confusion, bugs and name conflict.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
Adjust the names of the operating modes to match them
with the datasheet and INA230 pattern. While at it add
the missing INA237_OPER_MODE_TEMP_TRIG mode.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Newly introduced Coverity scan throws a warning about duplicate tag as
per MISRA coding standards, so, use a unique tag name in the existing
code for "shell".
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
Networking statistics framework is used to define handler and the data
structure, Wi-Fi management layer implements the handler and also adds a
new offload API to get statistics from the Wi-Fi driver.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
A new net_mgmt command and event are added for interface status,
depending on the implementation the status can be returned when polled
or an unsolicited event can be send by driver whenever there is a change
in status.
This is planned to be implemented only by upcoming wpa_supplicant,
offload implementation is left for driver developers.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
This is handy for applications to control timeout and try multiple
connections rather than relying on underlying implementation.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
