In a Controller Area Network a babbling node is a node continuously (and
usually erroneously) transmitting CAN frames with identical - often high -
priority. This constant babbling blocks CAN bus access for any CAN frame
with lower priority as these frames will loose the bus arbitration.
Being able to simulate a babbling CAN node is useful when examining the
behavior of other nodes on the same CAN bus when they constantly loose bus
arbitration.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds FIXED_PARTITION_* macros that take DTS node,
in contrary to FLASH_AREA_* macros that take label property,
to access properties of fixed-partition compatible DTS partition
definitions.
There is FIXED_PARTITION_NODE macro provided for translating
DTS labels to nodes.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
If a L2 link has been established, then the DHCP is taking too long as
it has to go through its capped exponential backoff timers to trigger
discover (The DHCP starts immediately during init, this is itself wrong,
it should start on a link UP notification) that delays the DHCP for
few seconds to a minute.
And if we do stop and start DHCP then also it goes through the initial
delays (though configurable), which is also not ideal.
Add support for restarting DHCP without any delay, i.e., release and
send discover immediately.
This is also useful in case L2 switches to a different subnet, in this
case Zephyr doesn't restart DHCP automatically, this API can be used by
L2 apps/drivers to restart DHCP to get new subnet IP.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
The CAN shell test is flaky on some qemu platform (qemu_riscv64_smp in
particular), where the first test command occasionally fails as it tries
to run with the backend not initialized.
The tests for subsys/shell/shell/src/main.c have a setup delay, copying
it to the CAN shell test seems to make it work reliably.
Tested with:
./scripts/twister -v -n -M -p qemu_riscv64_smp -T tests/drivers/can/shell
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Updated the iso_receive sample to configure and synchronize
upto 2 BISes in the created BIG sync.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to use the BIS array parameter and
selectively synchronize to subset of multiple Broadcast
Isochronous Streams in a Broadcast Isochronous Group.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix calculation of BIS subevents that was missing num_bis
when calculating the PDU latency.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect conditional compile to disable Controller
advanced scheduling feature which is required for Broadcast
ISO implementation.
Regression in commit 6fe1299c33 ("Bluetooth: controller:
llcp: fix CI tests for new LLCP").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In a Host plus Controller combined build for ISO feature
restrict the maximum ISO Tx PDU size to minimum of 251 bytes
and Host ISO Tx MTU. This will allow controller to use
reduced Tx time (subevent interval).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Ticker stop callback are executing in ULL_HIGH priority,
correct the value to 1U instead of 0U which is for LLL
execution context of the Bluetooth Controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix usage fault due to spurious ticker timeout expiry post
enqueuing of ticker stop operation.
Use ticker operation callback to handle completion of ticker
stop operation and then give the semaphore to thread to
notifying the completion of flash operation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Due to Zephyr's WiFi updates, common private
enums used in `hal_espressif` are now being used.
This updates private internal values to meet hal_espressif
changes.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
`samples/net/wifi` replaces custom esp32 wifi sample
code. Then it can be removed from main repository.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
ESP32 wifi connection uses Zephyr's net stack. Once WiFi connects
in station mode, is requires the application to handle DHCPv4
negotiation. This PR adds support to automatic negotiation by
handling the dhcpv4 calls in driver layer.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Moved all MBEDTLS dependencies from prj.conf
to Kconfig as WiFi depends on it.
Update esp32 wifi driver to enable `samples/net/wifi`
to work. Commands as such as `wifi connect` and `wifi scan` are now
available.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Previous update have not included edge cases, which
could still cause build failures. This completely removes
those compiler redefinitions from zephyr build.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Update Modules (External projects) documentation to:
- Recommend explicitly setting the module name in module.yml
- Recommend exposing module-provided headers with an include
pathname beginning with the module-name.
Fixes#49766
Signed-off-by: Gregory SHUE <gregory.shue@legrand.com>
Co-authored-by: Stephanos Ioannidis <root@stephanos.io>
Remove description from SOC_FAMILY_SMARTBOND so it's not directly
selectable. Also fix related board configuration.
Fixes#49916
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
