Add an explicit compiler configuration, COMPILER_FREESTANDING, which
controls whether the compiler should operate in freestanding or hosted mode
(according to the C and C++ language specifications.
This depends on having a C library which conforms with the language
specification, and the minimal C library does not. Have the minimal C
library select COMPILER_FREESTANDING to continue using freestanding mode
with that library.
For other C libraries, leave this disabled by default while allowing users
to enable it if they want to go back to the previous configuration.
Signed-off-by: Keith Packard <keithp@keithp.com>
Add bindings for LTC1665/LTC1660, which is a 8/10-bit
Digital-to-Analog Converter with eight individual channels.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
LTC1665/LTC1660 is a 8/10-bit Digital-to-Analog Converter
(DAC) with eight individual channels.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
This addition should help users to better understand potential issues
with domain clock configuration.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Don't check clock configuration before kernel was started since it
will prevent message to be displayed.
After kernel initialization, message is still valid and then ASSERT
more valuable to the user.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
A case of an invalid PDU was seen leading to a hit on this ASSERT, ie
this COULD happen. Refactoring of the state handling re. expectedness
in remote vs local request machines combined with ensuring the local
request machine ceases to expect PDUs when remote procedure 'takes over'
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Updates MCUboot to commit 6902abb from upstream which includes:
6902abb zephyr: Create common boot serial enter function
35941fe boot: zephyr: Add pin reset serial recovery entrance method
fd79db3 zephyr: boot: serial_recovery: Add no application entrace
method
b3e3ce3 boot: zephyr: serial_recovery: Add boot mode enter ability
e5c57dd boot_serial: Only have build number if non-zero
8a3b32c bootutil: Refactor signature verification
4e07d8f docs: add release note snippet for dumpinfo
ca56135 imgtool: Add 'dumpinfo' command
c050573 docs: Add release note for p224 removal
75c7c31 sim: Remove P224 curve references
3d92a6c imgtool: Remove P224 curve references
206b914 bootutil: Remove P224 curve
a97f009 Update readme for next dev version
23d2883 Update to version 1.10.0
cdf9de0 doc/readme-zephyr: document the serial recovery
4e9d86a doc: Added serial recovery documentation
827118f boot: serial_recovery: Add image hash support
f5e7753 boot_serial: support fragmentation for outgoing SMP packets
569b1d6 Update to version 1.10.0-rc1
d2dfa1b docs: Create release notes for 1.10.0 release
4337fee docs: Describe the release note snippet requirement
d4184eb docs: Setup template for release note process
1090d8f zephyr: Check zephyr,uart-mcumgr as candidate for serial
recovery
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Tests dedicated for choosing binaries basing on platform.binaries and
runners.yaml file. Additional tests for paths sanitizing.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Fix regression in refactored LLCP using uint16_t instead of
uint32_t in storing the win_offset_us value. This caused
connection update to fail with incorrect window offset being
used to schedule the connection radio events.
Regression since commit e1c2c36f56 ("Bluetooth: controller:
llcp: set refactored as default").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
MISRA Rule 5.7 requires uniqueness of tag identifiers. Shell is
frequently problematic because many code uses `const struct shell
*shell`. This causes CI noise every time one of these shell files is
edited, so let's update all of them with `const struct shell *sh`
instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The arm-clang compiler/linker does not optimize away unused function
symbols and thus will error if symbols that are referenced are not
defined. To fix this add needed ifdef'ry.
Fixes#56630Fixes#56628
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Remove shield, using this shild will require an overlay for
the particular board being used.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move channel description to devicetree for atmel,sam-afec
compatible to make the test more readable.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move channel description to devicetree for atmel,sam0-adc
compatible to make the test more readable.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move channel description to devicetree for atmel,sam-adc
compatible to make the test more readable.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move channel description to devicetree for gd,gd32-adc
compatible to make the test more readable.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move channel description to devicetree for telink,b91-adc
compatible to make the test more readable.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move channel description to devicetree for nxp,kinetis-adc16
compatible to make the test more readable.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move channel description to devicetree for nordic,nrf-saadc
compatible to make the test more readable.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move channel description to devicetree for nordic,nrf-adc
compatible to make the test more readable.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move channel description to devicetree for st,stm32-adc
compatible to make the test more readable.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move channel description to devicetree for nxp,kinetis-adc12
compatible to make the test more readable.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move channel description to devicetree for microchip,xec-adc
compatible to make the test more readable.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move channel description to devicetree for nxp,lpc-lpadc
compatible to make the test more readable.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move channel description to devicetree for nuvoton,npcx-adc
compatible to make the test more readable.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move channel description to devicetree for ti,cc32xx-adc
compatible to make the test more readable.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move channel description to devicetree for ti,cc13xx-cc26xx-adc
compatible to make the test more readable.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move channel description to devicetree for ite,it8xxx2-adc
compatible to make the test more readable.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move channel description to devicetree for nxp_mcux,12b1msps-sar
compatible to make the test more readable.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move channel description to devicetree for raspberrypi,pico-adc
compatible to make the test more readable.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move channel description to devicetree for espressif,esp32-adc
compatible to make the test more readable.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move channel description to devicetree for infineon,xmc4xxx-adc
compatible to make the test more readable.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
The sleep after carrier activation was badly ported so the time
was 1000 ms instead of 1 ms.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@gmail.com>
When the phy_event state diagram ends up in the
eth_mcux_phy_state_read_status case, the eth carrier
is enabled. However, this step only happens when an
interface is available in the context.
Regardless of the state of the iface, the state machine
will switch to eth_mcux_phy_state_read_duplex in the next
iteration. Thus, the states diagram never returns to the
previous state. As a result, the eth carrier will never
be enabled in the future.
This problem is fixed by setting the wait state if the
iface is not available.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@gmail.com>
Main now has a int return type.
Fix return values, so this sample can be compiled.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Align the comment with the new int main(void) convention
used in Zephyr.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The OFLEN bit has to be set by the host driver for ACE2.x. The
ownership of the IP is now handled at the host driver level, no longer
the firmware.
Setting it at the firmware level is a no-op if the bit is already set
by the host driver, and will fail it isn't already set.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
In LNL platform GPDMA and ALH is no longer used. DMIC uses LINK HDA
as a DMA engine. Therefore new shims, new register definitions and new
programming flows were defined.
This patch implements new DMIC programming requirements for LNL.
Since HDA is shared between Host and DSP, link_config field was added to
dai_config structure. This one is provided by Host in new IPC4 fields
during interface configuration.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
In ACE 2.0 platform (LNL) dmic got two new shim register ranges.
DMIC driver need to program them to configure the interface.
This patch adds new shims to device tree.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
Updated boot priority to PRE_KERNEL_1 for all instances
and removed dependency on PCIe. As shell is not working
in a situation where console is using a UART instance
under PCIe and boot priority set to POST_KERNEL.
Signed-off-by: Anisetti Avinash Krishna <anisetti.avinash.krishna@intel.com>
