Disable the hardware I2C target detection on the IT82xx2 SoC family.
Note: The register setting of I2C target detection is different in
IT81XX2 and IT82XX2 SOC.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Add expected output for ARMv6 CPUs in the mpu_test README, as this differs
from that for other AArch32 CPUs due to differences in how ARMv6 handles
faults
Signed-off-by: Katherine Watson <katie@radicalsemiconductor.com>
This is an FAQ and we don't have a satisfactory page that describes
the current state of the world for how to troubleshoot. This leads
to frustrated users and duplicated support efforts. Try to improve
this by at least writing down what people have to do today.
If we ever improve the situation by adding a machine-readable map
between drivers, Kconfig options, and DT compatibles, we can hopefully
do better than this, but at least it's a start.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Simplify the STM32 ADC driver code by using the new ADC resolutions
property in dtsi files.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Add a binding for STM32 ADC to specify the resolutions and all associated
register information (through a STM32_ADC_RES macro).
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Define some macros that will help to define the STM32 ADC resolutions in
the dtsi files. The end goal is to simplify the driver by removing code
specific to particular series.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
This commit adds a new libcxx testcase that tests the host standard
C++ library.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
Update 3.4 release notes to bring awareness to the
shifted values of voltage-ref and power-level
properties of the LPADC node
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
- Remove build asserts in favor of DT enums
- Remove power level property since it is unused by SDK
- Correct voltage ref value in DT to correspond to
chip specific values documented in reference manuals
instead of corresponding to SDK enum names.
- Fix SOC devicetrees affected by these changes.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The arm-clang compiler/linker does not optimize away unused function
symbols and thus will error if symbols that are referenced are not
defined. To fix this add needed ifdef'ry.
Build various network samples that utilize ethernet but don't have
CONFIG_NET_PROMISCUOUS_MODE will get a link error for:
Error: L6218E: Undefined symbol
net_mgmt_NET_REQUEST_ETHERNET_SET_PROMISC_MODE
(referred from ethernet.o).
Fix by adding ifdef protection around promisc code.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
The MCUX USB device driver currently suffers from
some performance related issues caused by the removal
of the intermediate buffer in commit 4e6f80d37a.
This buffer was essential in the case when some USB
descriptors or data were in a slow access memory,
for example a flash memory accessed over flexspi.
USB DMA as AHB master would try to fetch the data,
but it would be too slow and USB peripheral
could not meet deadlines on the USB bus waiting for it,
and so it would send null packets instead causing errors.
This problem can be fixed by re-introducing an intermediate
buffer in RAM with the data copied from the slow memory by
the core before the USB transfer begins, so that USB DMA
is not responsible for fetching it from flexspi/flash.
Changes to MCUX USB Device Driver:
- Re-add intermediate buffer for USB writes in RAM
- Buffer is not needed for reads, add runtime check
to avoid copy overhead
- Buffer is not needed for platforms with USB RAM,
since the USB RAM itself acts as an intermediate buffer.
Compile with buffer code only when USB RAM is not present on
the platform, to avoid unecessary copy overhead.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Give the nucleo_l476rg board and overlay to enable the lptim
so that usecase can run on that target board
This target is a platform candidate for this PM usecase
Signed-off-by: Francois Ramu <francois.ramu@st.com>
configure the nucleo_wb55rg with a prescaler on the LPTIMer input
clock to increase the max sleep duration.
With 32 the input clock is 1024Hz and max reachable timeout is
64 seconds.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This PR will divide the LPTIM clock freq to increase the max timeout.
Only one LPTIM instance is considered for PM timer.
The input freq becomes a fraction of the internal PCLK
source (mainly LSE clock). As the tick per sec does not change,
the minimum lptim counter must always be >0.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This is a new parameter to divide the LPTIM input clock
by a prescaler, changing the max reachable timeout of the LP timer.
It will divide the LPTIM input clock by 1 (reset value) up to 128.
The lptim configuration register is written with a 3bit value.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
On the stm32U5, when modifying the DIER register of the LPTIM peripheral,
a new write operation to can only be performed when the previous write
operation is completed and before going-on.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
- Runs Silabs Commanders which is useful for SiLabs boards that
can not use J-Link for various reasons.
- Flash support only, no debug.
Signed-off-by: Roman Dobrodii <rdobrodii@antmicro.com>
Adds the configuration file for a GitHub action that will greet first-time
contributor the first time they:
- open an issue
- open a PR
- get a PR of theirs merged
Fixes#56092.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
It is potentially ambiguous as to whether the props array pinter in the
fuel_gauge_get_prop() function permutes the given array.
Explicitly call out that the array will NOT be permuted.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
The `get_maintainer` script currently generates an error when a non-
slash-suffixed glob pattern matches any directories -- this is
incorrect because the glob pattern may be used to match files.
This commit updates the script to only generate an error when a
non-slash suffixed _only_ matches directories.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
CAVS platforms are not fully integrated with zephyr. Some of the
registers are still programed from SOF side. This feature can be enabled
for those platforms later when integration is fully done.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
This patch modifies the existing loop transfer test to allow testing for
device power state changes when starting and stopping a transfer.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Adding function that is allowing to release ownership of the DMA. When
DSP is no longer using dma instance it ownership can be released.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
This patch is refactoring device power flow routine. DMA instance will
not be power up after kernel initialization if device power management
is enabled. Power menager will power up device and its power domain if
device will be in use and disable it when it's no longer needed.
The DMA disabling part has not yet been implemented.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
When building drivers.modem.build we get a link error since
log_source_id_get() is not defined when CONFIG_LOG_MODE_MINIMAL
is defined.
Change ifdef protection to be CONFIG_LOG_RUNTIME_FILTERING
instead of CONFIG_LOG in the code to handle this case.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
When `CONFIG_EXTERNAL_CACHE=y`, the `zephyr/cache.h` header file
includes `zephyr/drivers/cache.h`, which then includes `zephyr/cache.h`
again.
This commit fixes the above circular dependency by removing the
unneeded `zephyr/cache.h` inclusion from the `zephyr/drivers/cache.h`.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
Mark the device as busy when it is locked to perform a flash operation
so that the PM subsystem does not try to suspend it. Also refuse to run
a PM action when the device is busy (in case `qspi_nor_pm_action()` is
called directly, not by the PM subsystem).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Implements a UART driver using PIO. Both PIOs are supported.
Only polling API is supported. Only 8N1 mode is supported.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Added a generic driver for RaspberryPi Pico PIO.
This driver is an intermediate driver for abstracting the PIO
device driver from physical pin configuration.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Signed-off-by: Ionut Catalin Pavel <iocapa@iocapa.com>
In some cases, it may be desirable to not have thread-safe reference
counting. For example, when CONFIG_MULTITHREADING=n.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Original computation seems to be based on
QSPI that has prescaler range [0, 255].
However, OSPI clock prescaler has different
value range [1, 256].
Adapt prescaler computation to valid OSPI
domain and add min value assert.
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
TWT flow id is of 3 bit value(maximum mnumber of flows
supported is 8). Flow id range limited to 0 to 7.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
This adds 2 new test cases that test whether arrayed parameters are
handled properly.
This improves the existing test_codec_configure_invalid_ase_id_unavailable
test case by handling request conatining 2 ASE_ID's where the 1st is
invalid.
This reproduces the issue fixed in
419772db94238debe114dfac337f5b238a15436e.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes loop over arrayed metadata/cc parameters. The paramaters have to
be pulled from the buffer, because in case the ASE_ID is invalid or in
invalid state, the next loop iteration would read invalid data.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
