Fix use of uninitialized ticks_slot value in calculation of
cis_offset_min when creating CIS. Calculate the ticks_slot
value earlier when committing the CIG parameters.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Do not enqueue node rx buffers for generating invalid ISO
data from Tx ISR while supplying the node rx buffer to
Radio. This causes node rx pool corruption and also MIC
failures in the central ISO LLL.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix peripheral ISO data ack mechanism to correctly update
the SN when PDUs fail to be received.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adding a test to detect problems in the cooperation of the getopt
and logger modules. It would detect issue: #57520
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Sample was using PRE_KERNEL_2, but the action (lock OFF state) can be
run at any time before the Kernel starts, ie, PRE_KERNEL_1/2. Use
PRE_KERNEL_1 + 99 to preserve similar behavior.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Have eventfd Kconfig select POLL is the code utilizes the polling
API. We get a link error for tests/lib/fdtable/libraries.os.fdtable
when building on arm-clang without this.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Renamed CONFIG_ADC_GECKO to CONFIG_IADC_GECKO to eliminate confusion
between the Incremental ADC found on series 2 silabs gecko MCUs, and the
ADC found on earlier gecko series.
Signed-off-by: Jared Baumann <jared.baumann8@t-mobile.com>
There exists several <board>.conf files in the boards directory of the
sbs_gauge tests. All these confs do is enable CONFIG_EMUL. We can remove
these board confs in favor of a single extra_configs entry in the sensor
sbs gauge testcase.yaml file.
Remove the sensor test_bs_gauge test's board conf files in favor of
enabling CONFIG_EMUL in the testcase.yaml file.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
When there is an active CIG for a new CIS create, then use
strict cis_offset_min/cis_offset_max so that the new CIS
is scheduled inside the active CIG event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
'ps_wakeup_mode' is used to set the wake up interval
to either 'dtim or 'listen_interval'. By default the
sta wakes up every dtim interval.
With 'ps_wakeup_mode' set to 'listen_interval' sta
will wake up for every listen interval period configured.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
listen interval is the time periods the STAs may be in idle
without listening beacons.
By default STA wakes up for every DTIM period.
If listen interval based power save is used
STA uses configured listen interval period(default 10
beacon intervals) to wake up.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Fix ztress_execute() out-of-bounds in case it is called with timer
and for maximum number of threads allowed (CONFIG_ZTRESS_MAX_THREADS).
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Add shell based on sip_svc subsystem to access the SDM mailbox in
EL3 layer using ASYNC sip_svc request.
Signed-off-by: Mahesh Rao <mahesh.rao@intel.com>
Introduce a new SiP SVC subsystem to provide ARM Silicon Provider based
supervisory call services. SiP SVC service provides the capability to
send SMC/HVC call from kernel running at EL1 to hypervisor/
secure monitor firmware running at EL2/EL3 and also added SiP SVC shell
commands to exercise the service.
Signed-off-by: Mahesh Rao <mahesh.rao@intel.com>
Add driver for communicating with EL3/EL2 layer using smc/hvc call
for Silicon vendor Provided services for INTEL AGILEX SOC FPGA.
Signed-off-by: Mahesh Rao <mahesh.rao@intel.com>
Added device tree bindings and implementaion for setting the
spi controllers chip select setup and hold time settings.
Signed-off-by: Dean Sellers <dsellers@evos.com.au>
Adds a note on when the "sha" hash field can be provided or not
and what the difference in operation is.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Prevents verifying the image has been uploaded successfully using
the hash provided at the start of the upload if the hash is not
the correct length of an SHA256 hash.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Cast `dhkey` to `void*` to avoid a warning from the logging subsystem:
```
<wrn> cbprintf_package: (unsigned) char * used for %p argument.
It's recommended to cast it to void * because it may cause misbehavior
in certain configurations
```
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
Fixes an issue when mcuboot is built for this board with the nRF5x
SDK bootloader Kconfig disabled to allow it to be placed at 0x0
instead of 0x1000 whereby it would not boot.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The Mi-V implements the A extension therefore it shouldn't use the C
version. The built-in version generates code with proper machine
opcodes.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This script tried to be too nice with users, and if they forgot
to set the scripts as executable, set it for them.
But this leads to too many testcases commited to main without
executable permissions.
Which then leads to other developers needing to set those
locally and end with dirty workspaces.
Instead let's not have run_parallel set the executable bit,
and have these tests fail in CI, so developers realize and fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Test scripts need to have executable permissions.
Otherwise, run_parallel will change the mode in CI,
and users need to set them locally which results
in a not clean git workspace.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
To avoid name conflict when register multi TSS IDT,
now only double fault use task gate, and Intel ISH
need to use additional TSS IDT for page fault.
Signed-off-by: Qipeng Zha <qipeng.zha@intel.com>
Check RPL when rescheduling happens during the reset operation
started by bt_mesh_rpl_reset.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This allows to move flash operations from the context that triggered
IVI update to the mesh settings work item that runs on the system
workqueue. After this change, the outdated RPL entries will be removed
in the setting work item triggered by store_pending function in
mesh/settings.c. This is required to for a case where the mesh settings
work item is running on a separate thread instead of the system
workqueue to unblock the system workqueue eventually.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Bitsets across byte boundaries does not work properly for big-endian;
Converted to use two uint8's instead
Signed-off-by: Troels Nilsson <trnn@demant.com>
As recommended in AN4760 the memory region where the QSPI flash can be
memory mapped should be configured to be Strongly ordered memory. This
works around an issue where a speculative read from the CPU may cause
later problems with using the QSPI bus.
This avoids #57466.
Signed-off-by: Ole Morten Haaland <omh@icsys.no>
Most available AT45 flash chips have their first two sectors shorter
than the consecutive ones. Usually, the first sector is marked as 0a
and has its size equal to eight pages (one block) and the second one
(usually 0b) is the complement to the size of a regular sector.
This commits modifies the driver so that erasing of these first two
sectors is performed correctly. This modified behavior is configurable
with a new DT property so that it is still possible to also use legacy
AT45 chips that do not feature such sector split. Such legacy chips
usually also do not support the chip erase and sector erase commands,
so two more DT properties are introduced to cover that.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Since I've been working on device.h for a while, I propose to become the
maintainer of the device driver model in Zephyr.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
As we are using a generic validation function for limits, due to data
type mismatch the check for TWT interval overflow and fails.
Fix the data type and accordingly the maximum value in the help.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
The HAL function PWM_SetupPwm does the inverse division to get the
number of pulses from the frequency.
In the case of a prescaler of 1 and a period of UINT16_MAX cycles
this would result in an uint16_t overflow.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The LSM6DSO16IS is a system-in-package featuring a 3-axis digital
accelerometer and a 3-axis digital gyroscope for industrial and IoT
solutions. The LSM6DSO16IS embeds a new ST category of processing,
ISPU (intelligent sensor processing unit) to support real-time applications
that rely on sensor data. The ISPU is an ultra-low-power, high-performance
programmable core which can execute signal processing and AI algorithms
in the edge.
https://www.st.com/en/mems-and-sensors/lsm6dso16is.html
This driver is based on stmemsc HAL i/f v2.02
Signed-off-by: Armando Visconti <armando.visconti@st.com>
