Add Kconfig guards for CONFIG_CAN_MAX_STD_ID_FILTER and
CONFIG_CAN_MAX_EXT_ID_FILTER as they only apply to the STM32 bxCAN driver.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remove the STM32H7 specific Kconfig overrides for setting the maximum
number of standard and extended CAN RX filters as they are unused.
The number of available standard and extended filter elements for Bosch
M_CAN can be configured via the devicetree.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Update the ACL group based scheduling with ACL first being
connected to use 4 connections and 4 streams to be
consistent with the test that does ACL the CIS one after
the other.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use defines for scan, create connection, connection and ISO
parameters in the tests.
Also, use same advertising interval for legacy and extended
advertising test.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Lock vecbase register after the HW initialization. After this
VECBASE address can change only after reset.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Use iterable sections to handle devices list. This simplifies devices
implementation by using standard APIs.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This patch introduces a new helper: INIT_LEVEL_ORD, which given a level
token, e.g. EARLY, PRE_KERNEL_1, etc. returns its ordinal. This can be
useful for sorting purposes, as level tokens do not result in the right
initialization order if sorted, e.g. POST_KERNEL < APPLICATION, but P >
A.
The implementation uses a bit of macrobatics to achieve this. First, we
define some helpers Z_INIT_XX_XX that evaluate to 1, and where XX
correspond to init levels. With them, we can perform equality checks
like this:
COND_CODE_1(Z_INIT_XX_##level, (VAL_IF_EXISTS), (VAL_IF_NOT_EXISTS))
It's a bit obscure, but it seems to work.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new flag to zephyr_iterable_section, NUMERIC, that configures
sorting to be numeric (up to 2 digits), that is, 2 comes before e.g. 10.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In some cases, like devices, it is necessary to sort numerically, that
is, sort 10 before 2. Add a new helper function to do that, up to 2
numeric digits.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a trailing _ to the section iterable name. This is useful, for
example, to implement numeric sorting like this:
SORT(.z_device_LEVEL_?_)
SORT(.z_device_LEVEL_??_)
Without the trailing _ it would not be possible to use the ?? wildcard
without triggering into trigraphs issues, because linker-defs.h header
is included in C files as well.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new API that allows to customize the name of an iterable section.
This allows to influence how section elements are sorted.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Even though they are just wrappers around TYPE_SECTION_START|END, it
allows using the STRUCT_SECTION* API namespace everywhere when working
with struct-based iterable sections.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
While it may be useful in some contexts, this information can be
obtained at compile time. Removing this command allows to migrate the
device infrastructure code to standard iterable sections, done later.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Effort has been made to abstract the features that are common
to both the Pico and Pico W into a shared file when possible.
This commit does not include the addition of bluetooth or wifi
drivers for the W's Infineon module.
Signed-off-by: Dave Rensberger <davidr@beechwoods.com>
Don't override a test case name check failed result by the following
RunID check failed result to report clearly about test case mismatch
situation as well as more specifically when the same test case appears
with unexpected RunID.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Fix suite-name-check bypassed at DeviceHandler on flash errors.
If the flash timeout is smaller than needed, but test images are
actually flashed successfully and appropriate tests executed,
then results from the previous test case were taken because
the flash error status makes the suite-name-check bypassed.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
It is no longer possible to select image for test or confirm
when MCUboot has been configured for DirectXIP.
MCUboot flags, in image trailer, are now ignored in DirectXIP
mode allowing to use entire slot for image upload.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Image management is now disabled by default if MCUboot
is configured for single application mode.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds Kconfig options that allow to inform application
what algorithm is used with MCUboot that will be booting
applications on board.
Kconfig options added:
- CONFIG_MCUBOOT_BOOTLOADER_MODE_SWAP_WITHOUT_SCRATCH
- CONFIG_MCUBOOT_BOOTLOADER_MODE_SWAP_SCRATCH
- CONFIG_MCUBOOT_BOOTLOADER_MODE_SINGLE_APP
- CONFIG_MCUBOOT_BOOTLOADER_MODE_DIRECT_XIP
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds img_mgmt_set_next_boot_slot function which uses
boot_set_next, from MCUboot/bootutil, to set application slot
for next boot.
The img_mgmt_set_next_boot_slot is intended to replace
img_mgmt_state_confirm and img_mgmt_state_set_pending.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds img_mgmt_active_slot() which allows to get
active (running) slot for given application image.
Added img_mgmt_active_image() allows to get number of image running
on current MCU core.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Topic branches are not in widespread use and the details on how are
managed are being reworked.
Drop the topic branches reference (now being renamed "collab" branches)
from the contribution guideline and just ask to open PRs against main,
as that's the common case right now, saves first time users from having
to dig through the various branches in the repository.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
With significant contribution to MCUmgr that brought increased
upload speeds and various other improvements in RAM and CPU usage,
general improvements in MCUmgr architecture and documentation,
Jamie has shown his vision for the subsystem and therefore
lets welcome him as a new MCUmgr subsystem maintainer.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add qemu_riscv32, qemu_riscv32e, and qemu_riscv64 targets
to the tests that list below. These set CONFIG_MULTITHREADING=n.
- tests/kernel/fatal/no-multithreading
- tests/kernel/mem_heap/mheap_api_concept
- tests/kernel/mem_slab/mslab_api
- tests/kernel/threads/no-multithreading
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Enable single-threading support for the riscv architecture.
Add z_riscv_switch_to_main_no_multithreading function for
supporting single-threading.
The single-threading does not work with enabling PMP_STACK_GUARD.
It is because single-threading does not use context-switching.
But the privileged mode transition that PMP depends on implicitly
presupposes using context-switching. It is a contradiction.
Thus, disable PMP_STACK_GUARD when MULTITHREADING is not enabled.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
There is no need to store the RPA in bt_addr_le_t structure, as the
bt_addr_le_t.type is unused anyway. Both bt_rpa_create and
bt_id_set_adv_random_addr take bt_addr_t as parameter.
Saves 1 byte of address type.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes uninitialized RPA value for BT_ID_DEFAULT.
The regression has been introduced in
8d6b206064.
As the result, the private address was not created and the advertising
was started with 00:00:00:00:00:00 address.
In case of the other advertising ID's, those are initialized
from id_create context.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The bt_gatt_indicate() expects its parameters to remain valid while the
indicate procedure is active. But the `sc_range` variable was local to
the function. It is assigned to the `data` field and passed on to
bt_gatt_indicate(). The memory associated with `sc_range` goes out of
scope as soon as the function returns thereby breaking the contract of
the API. This dangling reference will lead to undefined behavior.
This is now fixed by making the `sc_range` array static and further
making it an array of arrays, as the sc_range may have different values
for each connection.
Found as violation of MISRA C:2012 and CERT DCL30-C by sonarcloud.
Signed-off-by: Balaji Srinivasan <balaji.srinivasan@nordicsemi.no>
BT Core Spec states that feature exchange should be initiated if
not already performed. So in this case initiate feature exchange
and 'abort' enqueued CIS create if peer doesn't support CIS peripheral
feature
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
The SSD16xx driver used to use the SCREEN_INFO_DOUBLE_BUFFER flag to
indicate to the LVGL integration that it needs writes to be performed
twice. This was required because partial writes require both the old
and new buffer to be written.
This behavior is really an implementation detail and only applies to
partial refresh. Do this buffer maintenance in the driver instead.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Remove the optional call to ssd16xx_update_display() in
ssd16xx_clear_cntlr_mem(). This doesn't really belong in that function
and just adds a non-obvious boolean argument to the function.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Add support for partial refresh profiles. This makes it possible to
use partial refresh on generation 2 devices which are able to store
partial refresh LUTs in OTP.
Partial refresh is only enabled if a partial profile has been
provided. The display will use the full refresh profile if in this
case.
Devices that need custom LUTs and voltages can specify them separately
for the full and partial profiles. The controller will be reset when
changing profiles which means that profiles always override the
default reset values. This means that it is, for example, possible to
use default values and LUTs from OTP for a full refresh and a custom
profile for partial refreshes.
For example, to use a GoodDisplay GDEY027T91 with partial refresh
simply use the following device tree fragment:
display: ssd1680@0 {
compatible = "solomon,ssd1680";
spi-max-frequency = <4000000>;
duplex = <SPI_HALF_DUPLEX>;
reg = <0>;
dc-gpios = <&arduino_header 15 GPIO_ACTIVE_LOW>;
reset-gpios = <&arduino_header 14 GPIO_ACTIVE_LOW>;
busy-gpios = <&arduino_header 13 GPIO_ACTIVE_HIGH>;
/* Enable the built-in temperature sensor */
tssv = <0x80>;
width = <264>;
height = <176>;
/* Enable partial refresh using built-in LUT */
partial {
};
};
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Update the device tree bindings for the SSD16xx driver to make it
possible to specify multiple refresh profiles.
The only profile currently supported is the 'full' profile.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
The SSD16xx driver currently provides basic support for most chips in
the Solomon Systech SSD16xx range of e-paper drivers. We currently use
the SSD1608, SSD1673, SSD1675A, and SSD1681 in various boards
supported by Zephyr.
The main user-facing difference between the various SSD16xx chips is
the resolution they support (sources & gates), but there are other
differences as well. For example:
* 8 or 16 bits used to represent x coordinates
* 8 or 16 bits used to represent y coordinates
* Differences in refresh configuration (SSD16XX_CMD_UPDATE_CTRL2)
* Differences in LUT sizes
The driver currently assumes that the user specifies the number of
bits used to describe coordinates. However, as we add support for more
chips, more of the differences will become apparent and need
workaround.
Comparing data sheets from different chips in the SSD16xx range
suggests that there are (at least) two different generations
present. These differ in the size of the LUTs they expect and the way
they handle partial refresh. This impacts register layout where
SSD16XX_CMD_UPDATE_CTRL2 uses bit 3 selects "mode 2" whereas older
devices uses this for a mode referred to as "initial".
In order to add support for partial refresh in newer devices, we need
to be able to distinguish between the different generations of the
chip. It might be possible to add a DT property to indicate the
revision, but that seems like a bit of an anti-pattern and it would be
hard for users to specify the correct chip generation.
This change introduces chip-specific compatible strings instead of the
generic SSD16xx. There is unfortunately clear pattern that can be used
to distinguish different generations, so the full chip name must be
specified. A benefit of this is that we don't need to specify the
width of the fields describing coordinates in device trees.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Move the pinctrl dtsi (mimx8ml8dvnlz-pinctrl.dtsi) from board dts to
_uart overlay since, now, for nxp_adsp_imx8m, this is used only with
uart support for certain samples.
This also fixes a build error on SOF, where we don't take the nxp_hal
and the dtsi cannot be found.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
The 2c98a001a4 (#57597) cause
regression with ARC MWDT toolchain.
Restore CREATE_OBJ_LEVEL wildcard pattern to be suitable for
both GNU and MWDT toolchains. We return asterisk symbol which
was dropped in 2c98a001a4
(but keep rest of the changes to wildcard pattern).
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
This commit updates the CI workflows to use the `zephyrproject-rtos`
organisation-level AWS secrets instead of the repository-level secrets.
Using organisation-level secrets allows more centralised management of
the access keys used throughout the GitHub Actions CI infrastructure.
Note that the `AWS_*_ACCESS_KEY_ID` is now stored in plaintext as a
variable instead of a secret because it is equivalent to username and
needs to be identifiable for management and audit purposes.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
