The way that _init_tokens() is manipulating globals() defeats static
analyses of the file that are trying to infer a type for the 'tok_id'
variable in assignment expressions like 'tok_id = _T_INCLUDE'.
To make it easier on the analyser, define the token types as an
enum.IntEnum named _T. This means we can write e.g. '_T.INCLUDE'
instead of '_T_INCLUDE', avoiding line length increases in the lexing
code.
While we're here, use '==' and '!=' instead of 'is' and 'is not'
when comparing a tok_id that is obtained from an re.Match.lastindex
with a _T.FOO value.
This is now necessary since an int object and a _T object definitely
don't point to the same memory. It worked previously because CPython
interns all integer instances from -5 to 256, but that's an
implementation detail and not a language feature. Since we're getting
the ints from an re.Match.lastindex instead of putting the exact
_T_FOO values into some list, this code probably should not strictly
speaking have been using 'is'.
Explicitly initialize the global _token_re also, to make it more
visible for static analysis.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Continue annotating the module. In some cases mypy will miss that
_err() calls means the function will not return, so we return an
unnecessary local variable to appease it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add a _MarkerType enum. A subsequent commit will use it for type
annotations in the Property class.
Fix an incorrect type in a comment while we're here.
We continue to use 'marker_type is _MarkerType.FOO' instead of
'marker_type == _MarkerType.FOO' because we are adding those actual
_MarkerType.FOO objects to each property, so 'is' comparison
is legitimate.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
A step along the way towards typing the whole module.
Fix an incorrect (or at best misleading) comment while we're here,
which was noticed by the type checker when I originally annotated
'props' as a Dict[str, bytes].
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Marking this NoReturn helps the type checker figure out that functions
which call it are only returning valid values or failing to
return. (It unfortunately doesn't always work as mypy's control flow
analysis seems to treat a direct 'raise DTError(...)' differently than
calling _err() in some situations, but it helps.)
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Move the DTError, Node, Type, and Property definitions to the top.
This way, class definitions occur before methods which use those
classes. This will be useful to avoid string literals in type
annotations that will be added later. Some can't be avoided due to
circular dependencies, but this will help.
Adjust whitespace.
No functional changes expected.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Change to make i2s_config const missed a case in the SAM driver.
Without this we get build errors when building in CI.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We don't currently configure any SPI interface on the hexiwear_k64 so
remove 'spi' as a listed supported feature in the board YAML.
This can be added back if SPI support is added for the board in the
future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update to new docker image with various updates including renode, llvm
and the base distro (moving from ubuntu 18.04 to 20.04).
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds support to generate SPDX 2.2 tag-value documents via the
new west spdx command. The CMake file-based APIs are leveraged to
create relationships from source files to the corresponding
generated build files. SPDX-License-Identifier comments in source
files are scanned and filled into the SPDX documents.
Before `west build` is run, a specific file must be created in the
build directory so that the CMake API reply will run. This can be
done by running:
west spdx --init -d BUILD_DIR
After `west build` is run, SPDX generation is then activated by
calling `west spdx`; currently this requires passing the build
directory as a parameter again:
west spdx -d BUILD_DIR
This will generate three SPDX documents in `BUILD_DIR/spdx/`:
1) `app.spdx`: This contains the bill-of-materials for the
application source files used for the build.
2) `zephyr.spdx`: This contains the bill-of-materials for the
specific Zephyr source code files that are used for the build.
3) `build.spdx`: This contains the bill-of-materials for the built
output files.
Each file in the bill-of-materials is scanned, so that its hashes
(SHA256 and SHA1) can be recorded, along with any detected licenses
if an `SPDX-License-Identifier` appears in the file.
SPDX Relationships are created to indicate dependencies between
CMake build targets; build targets that are linked together; and
source files that are compiled to generate the built library files.
`west spdx` can be called with optional parameters for further
configuration:
* `-n PREFIX`: specifies a prefix for the Document Namespaces that
will be included in the generated SPDX documents. See SPDX spec 2.2
section 2.5 at
https://spdx.github.io/spdx-spec/2-document-creation-information/.
If -n is omitted, a default namespace will be generated according
to the default format described in section 2.5 using a random UUID.
* `-s SPDX_DIR`: specifies an alternate directory where the SPDX
documents should be written. If not specified, they will be saved
in `BUILD_DIR/spdx/`.
* `--analyze-includes`: in addition to recording the compiled
source code files (e.g. `.c`, `.S`) in the bills-of-materials, if
this flag is specified, `west spdx` will attempt to determine the
specific header files that are included for each `.c` file. This
will take longer, as it performs a dry run using the C compiler
for each `.c` file (using the same arguments that were passed to it
for the actual build).
* `--include-sdk`: if `--analyze-includes` is used, then adding
`--include-sdk` will create a fourth SPDX document, `sdk.spdx`,
which will list any header files included from the SDK.
Signed-off-by: Steve Winslow <steve@swinslow.net>
Remove the config BOOT_TIME_MEASUREMENT and corresponding #ifdef'd code
throughout (kernel/init.c, idle.c, core/common.S , reset.S, ... ) which
hold the extern hooks for z_timestamp_main and z_timestamp_idle in the
removed boot_time test suite.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
This test for boot time was sufficient when it was originally
introduced, but is no longer appropriate as the code and
ecosystem grew.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
`write_stats` functionality implementation is guarded by
`BT_GATT_CLIENT`, but is also called from commands defined when
`BT_GATT_DYNAMIC_DB` is set. This means that now application will not
build with `BT_SHELL` used, when we set `BT_GATT_DYNAMIC_CB` solely.
Move this functionality to top of the file without guarding
ifdefs, so it can be used in all gatt shell commands.
Signed-off-by: Marek Metelski <marek.metelski01@gmail.com>
There is a choice to log btmon logs over UART or RTT.
You can choose number of RTT buffer, set its name and size.
Replaced CONFIG_BT_DEBUG_MONITOR with CONFIG_BT_DEBUG_MONITOR_UART
for UART usage and CONFIG_BT_DEBUG_MONITOR_RTT for RTT.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
i is of uint type, so it'll never be negative. Thus, while loop
condition i >= 0 will always be true.
This patch also fixes issue with marking unused l2cap channels
as free by freeing only these that were marked as in_use by
get_free_channel(), and not all of them.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Create a common dtsi file to share peripherals between both CPU cores.
The spi is the initial shared peripheral.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
The current rf2xx driver not implement any configuration. Add
the minimal structre to implement rf2xx driver configuration and
implement IEEE802154_CONFIG_PROMISCUOUS mode.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Configure transceiver to create a 0 period backoff and perform only one
time the CCA without transmission retires for failures.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The current RF2XX driver only support IEEE802154_TX_MODE_CSMA_CA. Add
IEEE802154_TX_MODE_DIRECT to allow transmit packets immediately without
performing random backoff, CCA and retransmission process.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Use device_usable_check instead of device_is_ready so we can propagate
back whatever error that device_usable_check() determined to the caller
of the clock API.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The MAX17262 is an ultra-low power fuel-gauge IC which implements the
Maxim ModelGauge m5 algorithm. The IC monitors a single-cell battery
pack and supports internal current sensing for up to 3.1A pulse
current. The IC provides best performance for batteries with 100mAhr
to 6Ahr capacity.
Signed-off-by: Matija Tudan <mtudan@mobilisis.hr>
Adds mimxrt1060_evk and mimxrt1064_evk boards to the platform_allow list
for the smp_svr sample application.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds flash partitions and chosen nodes to the mimxrt1060_evk device tree
to support mcuboot and storage on the external QSPI flash. This flash is
rated for 100K minimum program-erase cycles per sector, therefore this
partition configuration supports approximately 100K / (3072/128) = 4167
upgrades.
Also enables FlexSPI flash driver XIP mode support on this board to
support mcuboot.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds flash partitions and chosen nodes to the mimxrt1064_evk device tree
to support mcuboot on the internal QSPI flash. This flash is rated for
100K minimum program-erase cycles per sector, therefore this partition
configuration supports approximately 100K / (1984/64) = 3225 upgrades.
Also enables FlexSPI flash driver XIP mode support on this board to
support mcuboot.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This is always defined since:
755d09e149 include/drivers/clock_control: stm32: Update for STM32F1
support
So the condition has currently no effect and causes the prescaler to
always be set to /2.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Renamed offset and offset_units to offs and offs_unit to be
consistent with rest of the other structures.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ULL reference count decrement to be performed before the
done events are handled, so that correct reference count is
used to determine if events are pending in the pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
