This commit modifies st prescaler value from 0 to 10000 for
STM32 nucleo_f207zg. So pwm_api test results in successful
execution on nucleo_f207zg board.
Signed-off-by: Sidhdharth Yadav <sidhdharth.yadav@hcl.com>
The coverity report "Out-of-bounds access". The reason is
The room of src and dest buffer is less than the count wanted
to be copyied. So enlarged the src and dest buffer to solve this
issue.
Fixes:#35345
Fixes:#35346
Signed-off-by: Ying ming <mingx.ying@intel.com>
Enable the :members: option by default when using breathe directives.
This exposes automatically stuff like structure fields.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The way some structures were documented was causing issues on the
Sphinx/Breathe side. Move to a more "standard" format.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When duplicates exist the problem may come from two or more distinct
constructs. When running parallel builds there is no guarantee on which
one will come first (or if all), so allow any C construct.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When this option is enabled some data structures have missing pages. Use
the default setting (NO).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This patch adds a label property to the GPIO LED parent node and fixes
the label property description of the child node. Indeed it is the label
of a parent node which can be used as device_get_binding() parameter to
retrieve the LED device, and not the one of a child node.
In addition, this patch sets both this properties as not required
because they are not.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
This patch adds a label property to the PWM LED parent node and fixes
the label property description of the child node. Indeed it is the label
of a parent node which can be used as device_get_binding() parameter to
retrieve the LED device, and not the one of a child node.
Fixes#34275
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
If the label property is missing in a "pwm-leds" compatible DT node
(which is almost always the case), then the device name is now set to
DT_NODE_FULL_NAME instead of "LED_PWM_$inst" previously.
This allows applications to use the DEVICE_DT_NAME macro to retrieve
the device name instead of gessing an arbitrary string.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
In tests that expect returning error in response for l2cap
connection request we use predefined PSMs. This commit adds
check for required keysize (which will always return error,
as connection is not secure and key size will always be 0)
instead of setting security level 4 (which would return
insufficient authentication, not insufficient key size).
It also adds suport for PSM used in insufficient authorization
tests - choosing this PSM will set flag that triggers error
on channel accept.
This affects tests L2CAP/LE/CFC/BV-[10-15]-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
* boot_serial: allow to build when CONFIG_MULTITHREADING=n
* allow to not provide scratch area definition if scratch
algorithm is not used.
fixes#35048
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
On Apollo Lake, each GPIO controller has more than 32 pins.
But Zephyr API can only manipulate 32 pins per controller.
So the workaround is to divide each hardware GPIO controller
into 32-pin blocks so each block has a GPIO driver instance.
Compounding to the issue is that there cannot be two device
tree nodes with same register address. So another workaround
is to increment the register addresses by 1 for each block.
So when mapping the address, the lowest 8-bit needs to be
masked to get the actual hardware address.
Fixes#28551
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Publish docs every 3 hours, this way fixes early in the morning are
reflected online earlier and no need to wait until the next day.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The current location makes no sense because this is for users, not
contributors. Put it in the GSG since a previous attempt to restore
its location under the user guides was rejected in favor of this
location.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
One of subtests had been supposed to check if log files are numbered
properly and in continuous manner, but due to logic error it would
also count non-log files.
Fixes: #33629
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Fixes sample execution ending early with error, as it attempted
to mount the LittleFS partition second time, after it has already
been mounted by the auto-mount feature.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
`check-warns` step is no longer used since the introduction of
`warnings_filter` extension.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit fixes a bug where outdated RPL entries might not be removed
properly from the persistent storage making those entries dead.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
The BabbleSim test for friendship has some timing requirements imposed
by the polling mechanism, which requires synchronization between
devices.
Add a synchronization message from LPN to the mesh device in the and
clear poll events for the friend in the group messaging test to remove
timing dependency. Add a large margin on the wait time between polls in
the friend messaging test for the same purpose.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
According to Bluetooth core specification v5.2, if Host set
random address when any of scanning (passive or active), the
Controller shall return the error code Command Disallowed (0x0C).
Signed-off-by: Freddie Yang <freddie.yang325@outlook.com>
The nRF SOCs declare support for SWO using the HAS_SWO define. In
addition, the SWO pin has to be configured at runtime, which is done
through the Nordic HAL by defining ENABLE_SWO.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In case CONFIG_NOCACHE_MEMORY=y, the D-Cache need to be clean and
invalidated before enabling the MPU to make sure no data from a
__nocache__ region is present in the D-Cache.
If the D-Cache is disabled, SCB_CleanInvalidateDCache() shall not be
used as it might contains random data for random addresses, and this
might just create a bus fault.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On reset we do not know what is the status of the D-Cache, nor its
content.
If it is disabled, do not try to clean it, as it might contains random
data for random addresses, and this might just create a bus fault.
Invalidating it is enough.
If it is enabled, it means its content is not random.
SCB_InvalidateDCache() will clean it, invalidate it and disable it.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
If this call receives an invalid device pointer as argument it
assumes that the `device` is not ready for usage.
This routine is currently called by two device specific APIs:
- device_usable_check(const struct device *dev)
- device_is_ready(const struct device *dev)
The device-specific APIs documentation claims that these two
routines must be called with a device pointer captured from
DEVICE_DT_GET(). So passing NULL is a violation of the rule.
Nevertheless, is quite common in drivers to assign NULL to
a device pointer if the corresponding DT property has not been
found (e.g. a not used gpio interrupt declaration for a given
device instance) and seems legit to interpret this condition
same as the device is not ready for usage.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Allow time for the shell to successfully echo the reboot command input
before the reboot abruptly terminates it. n This can help external
systems that interact with the shell and require the reboot command's
echo to successfully complete to synchronise with the device.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/35325
Signed-off-by: Nick Ward <nick.ward@setec.com.au>
Modify support for u-blox BMD-345-EVAL which uses the nRF52840
and a Skyworks RFX2411 FEM.
These edits follow the naming cnoventions that is used
with the other u-blox EVKs recently added, or in progress
This board is similar to the nRF52840dk_nrf52840 with the
addition of a FEM. Four Arduino GPIO pins have been
reassigned to the PA_LNA control pins.
u-blox would prefer to use this naming convention to match
other BMD-3xx-EVAL and EVK-NINA-Bx boards recently submitted.
Tested with blinky, button, and Bluetooth peripheral_hr
Checking dts files
Updated CODEOWNERS to rename bmd_345_eval to ubx_bmd345eval_nrf52840
Added CMakeLists.txt, updated board.c
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
The board definition provides partition configuration that is enough
for this test and does not require overlay.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Call on_status if the Reason-Phrase is not provided.
This allows for the numeric status code to be set.
Also, ensure the numeric status code is always set
in on_status, not just if the specific callback is set.
Signed-off-by: Justin Morton <justin.morton@nordicsemi.no>
Buffer used for storing log messages must be aligned as specified
by Z_LOG_MSG2_ALIGNMENT. Added missing alignment.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Without TX thread support in network stack USB device stack
blocks it self by usb_transfer_sync() which is
called in the same context as usb_set_interface() in sequence
of netusb_enable(), net_if_up(), net_l2_send().
Fixes: #35338
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
work_q.c is not being built or used, it was replaced by user_work.c
which now has k_work_user_queue_start.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Device Tree address mixup between
SAI2 <-> SPI2 and SAI3 <-> SPI3
Add functionality to SPI2/3
Tested on SPI2
Signed-off-by: Rico Ganahl <rico.ganahl@bytesatwork.ch>
Add minimum harness and to get the sample passed when run using
twister.
Adding console validates uart init with DEVICE_RUTIME=y.
Additionally, clarify comment about DEBUG activation.
Fixes#35033
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In case of multi-instance the driver tries to discover whether
there are devices attached to SDx/SCx sensorhub bus. If not it
just turns the shub_inited variable (inside data structure) to false
and skips doing any further sensorhub related action for that
particular IIS2ICLX device instance, regardless the fact that the
macro CONFIG_IIS2ICLC_SENSORHUB is enabled.
Moreover, the info found during the enumeration process for a
particular instance (number and types of attached devices) must be
saved inside the per-instance data structure, so that more than one
IIS2ICLX device can be used as a sensorhub without interfering with
the others.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
In case of multi-instance the driver tries to discover whether
there are devices attached to SDx/SCx sensorhub bus. If not it
just turns the shub_inited variable (inside data structure) to false
and skips doing any further sensorhub related action for that
particular LSM6DSO device instance, regardless the fact that the macro
CONFIG_LSM6DSO_SENSORHUB is enabled.
Moreover, the info found during the enumeration process for a
particular instance (number and types of attached devices) must be
saved inside the per-instance data structure, so that more than one
LSM6DSO device can be used as a sensorhub without interfering with
the others.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
We are in the process of changing the HEAD branch in the zephyr
repository from 'master' to 'main'. Users will need west version at
least 0.10.1 for the plain 'west init' line in the getting started
guide to still work after that change.
To avoid problems:
- add -U to the macOS and Windows lines for installing west (this
option is already there for Ubuntu). Upgrading west will make
the guide 'just work' for users who have an old version.
- bump the minimum version in the relevant requirements file,
in case anybody is doing something like basing a CI setup
on those versions.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
