Implement stubs for ARM CMSIS intrinsics,
to be used locally for nrf52_bsim builds.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix k_sem_take called with a timeout value other than K_NO_WAIT from
isr.
This happens when tty_irq_input_hook calls tty_putchar with the `~`
character to give the user a clue that input was lost.
This resulted in the following assert in sem.c:
ASSERTION FAIL @ WEST_TOPDIR/zephyr/kernel/sem.c:140
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Disable the controller advertising extension feature default setting
until the feature is complete. The zephyr host requires the
LE Advertising Set Terminated event to function.
Without this event a peripheral connection cannot pair because the
local on-air address is not set, and the advertising state will not be
cleaned up, so advertising cannot be started again.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The frnd->last buffer can potentially be NULL if friend_clear is called
after the adv.c buf->busy check, but before the adv_start callback.
The current design is based on the adv.c thread being cooperative, and
therefore not yielding between the busy check and the adv_start
callback, but as the bt_le_adv_start call has to acquire a semaphore,
there's a possibility for friend_clear being called inbetween.
Fixes#26177.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Added automatic strdup for RAM %s parameters. Postponed format
processing to idle time. Automatic parameters counting during
compilation. Very fast execution for up to three parameters.
Signed-off-by: Tomasz Konieczny <tomasz.konieczny@nordicsemi.no>
Introduced interface for efficient logging from external logsystems:
Added handling of vaargs and automatic strdup to macros intended
to be used in logging interface function. Fast path to less then 4
arguments to speed up the execution. Made log_count_args external,
if external logsystem cannot count arguments.
Signed-off-by: Tomasz Konieczny <tomasz.konieczny@nordicsemi.no>
A hardcoded path lenth of 80 will not be able to suppor the full length
of 255 when LFN is enabled. This does produce a compiler error,
thankfully, this is only applicable to the test cases.
Signed-off-by: Roman Vaughan <nzsmartie@gmail.com>
Try to define MAX_FILE_NAME to the appropriate max length based on the
selected filesystm. Otherwise fallback to a standard filename of 12
(made up of 8.3 : <filename>.<extension>)
Signed-off-by: Roman Vaughan <nzsmartie@gmail.com>
The version as shipped in Newlib itself is coded a bit sloppily for an
embedded environment. We thus want to override it (and make it weak, to
allow user apps to override it in turn, if needed). The desired
properties of the implementation are:
1. It should call _write() (Newlib implementation calls write()).
2. It should be minimal (Newlib implementation allocates message
on the stack, i.e. misses "static const").
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add warning about enabling the options below so that users are
aware that this is a security risk.
- CONFIG_BT_DEBUG_SMP
- CONFIG_BT_DEBUG_KEYS
- CONFIG_BT_OOB_DATA_FIXED
- CONFIG_BT_USE_DEBUG_KEYS
- CONFIG_BT_STORE_DEBUG_KEYS
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Provide a very simple model of the DSB ARM
instruction as no-operation. The implementation
is provided in a cmsis.h header file added
in the nrf52_bsim board directory.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a DSB before doing WFE in get_entropy_isr, to ensure
the memory transactions are complete.
Add a note clarifying a dependency for the existing solution
(dependency is satisfied by ARCH code but is good to state
clearly).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We need to clear the NVIC Pending bit for the RNG IRQ before
doing any WFEs and expect to wake up by RNG events. This is
because the event register will be set only if NVIC status
is changed from 0 to 1.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Since CONFIG_NET_BUF_USER_DATA_SIZE was not defined when
CONFIG_NET_BUF=n, compilation would fail on struct net_buf.user_data.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
The sample does not provide a way to verify its operation
and causes fails on nrf platforms. Added regex checks in sample.yaml
so the sample can be verified.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Appropriate WS can be loaded automatically if
the display controller has integrated temperature
sensor or an external sensor is connected.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Callback used mqtt_publish_qos1_ack but mqtt_subscribe called with
default 0 value (MQTT_QOS_0_AT_MOST_ONCE)
Signed-off-by: Alexey Markevich <buhhunyx@gmail.com>
After reviewing that test I found output looks too messy.
1. Remove words starting from capital letter in the middle of the
sentence.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Fixes the bq274xx sensor driver to check the i2c device pointer is
non-null, rather than the bq274xx sensor device pointer. This appears to
be the originally intended check based on the LOG_ERR message.
Coverity CID: 210035
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Initialize the dummy data transfer so spi transfer is defined even for
an undefined tx data buffer. This aligns the rv32m1 spi driver with the
mcux spi driver.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
New config file to build an OpenThread NCP for the NRF52840-DK
via CDC-ACM USB on the connector J3 (labelled 'nRF USB').
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
When compiling the settings subsystems, I was getting the following
compiler warning:
```
/home/markus/src/wrp-n4m/zephyr/subsys/settings/src/settings_line.c: In function 'settings_line_cmp':
/home/markus/src/wrp-n4m/zephyr/subsys/settings/src/settings_line.c:477:6: warning: 'rc' may be used uninitialized in this function [-Wmaybe-uninitialized]
477 | int rc;
| ^~
/home/markus/src/wrp-n4m/zephyr/subsys/settings/src/settings_line.c: In function 'settings_line_entry_copy':
/home/markus/src/wrp-n4m/zephyr/subsys/settings/src/settings_line.c:453:9: warning: 'rc' may be used uninitialized in this function [-Wmaybe-uninitialized]
453 | return rc;
```
This patch fixes the warning.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
When compiling network subsystem, I was getting the following compiler
warning:
```
In file included from /home/markus/src/wrp-n4m/zephyr/include/net/net_if.h:29,
from /home/markus/src/wrp-n4m/app/src/main/node/main.cpp:20:
/home/markus/src/wrp-n4m/zephyr/include/net/net_l2.h:80:32: warning: unnecessary parentheses in declaration of '__net_l2_OPENTHREAD' [-Wparentheses]
80 | #define NET_L2_GET_NAME(_name) (__net_l2_##_name)
| ^
/home/markus/src/wrp-n4m/zephyr/include/net/net_l2.h:82:29: note: in
expansion of macro 'NET_L2_GET_NAME'
82 | extern const struct net_l2 NET_L2_GET_NAME(_name)
| ^~~~~~~~~~~~~~~
/home/markus/src/wrp-n4m/zephyr/include/net/net_l2.h:114:1: note: in
expansion of macro 'NET_L2_DECLARE_PUBLIC'
114 | NET_L2_DECLARE_PUBLIC(OPENTHREAD_L2);
| ^~~~~~~~~~~~~~~~~~~~~
```
This patch fixes the warning.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
This is no longer required since drivers implementing the sockets
offload interface were migrated to use pure zsock_ instead of
raw POSIX types and functions.
Signed-off-by: Adam Porter <porter.adam@gmail.com>
Aligns MAC registers to the latest reference manual.
Replaces NULL buffers as some SPI drivers will fail.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Enable GPIO as a workaround to enable some SPI slaves are not correctly
controlled using the Flexcomm SPI device.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
This patch introduces the new b_l4s5i_iot01a discovery kit
from STMicroelectronics.
This is a IOT node based on the stm32l4s5vi
including MEMS, Bluetooth BLE, WiFi and NFC modules
Signed-off-by: Francois Ramu <francois.ramu@st.com>
A net context in LISTENING mode waits for incoming connections, once
a new connection is established a new net context is spawned which
is responsible for handling the new connection.
Therefore when closing a LISTENING context it is not useful to send FIN
as it is never connected. Actually closing the connection would be done
by calling close on the spawned net context which is returned by the
accept call.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
The CONFIG_BT_RPMSG_NRF53 should depend on the SOC, not the BOARD
definition. Otherwise this will break for custom boards.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
This tests make sure that the right source address is chosen during
the mesh multicasting.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Currently there is chosen the link local address as a source address
for each multicast destination address. It is a bug for OpenThread
network where the mesh-local EID addres should be picked in this case.
This commit fixes it by distinquish the mesh local multicast among any
others.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
This commit removes API functions and macros which were deprecated in
2.2 release. GPIO drivers are updated accordingly.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Replace usage of deprecated GPIO_INT_ACTIVE_LOW, GPIO_INT_ACTIVE_HIGH,
GPIO_PUD_PULL_UP flags with a new equivalent in a few boards that were
added after 2.2 release.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Modified order of reported events on rx disable to match API
description: first RX_RDY and then RX_BUF_RELEASED.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
