Add support for the J-Link Commander "-NoGui 1" command line parameter
in the West J-Link runner.
This command line parameter suppresses GUI dialogs (except for license
dialogs) in J-Link Commander starting from v6.80.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The memory domain APIs document that overlapping regions are
not allowed, check for this unconditionally.
Cleanup assertion error messages. Use __ASSERT_NO_MSG for
blindingly obvious NULL checks.
We now have a `check_add_partition()` function to perform
all the necessary sanity checks on adding a partition to a
domain. This returns true or false, which will help later
when we implement #24609
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These macros are used to validate that regions aren't
programmed that allow both writes and execution.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some systems may need to associate arch-specific data to
a memory domain. Add a Kconfig and `arch` field for this,
and a new arch API to initialize it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Wrap the entire definition around CONFIG_MEMORY_PROTECTION.
Add incomplete declaration for IS_ENABLED() purposes.
Some arch code uses struct k_mem_partition internally for
MPU management, even if userspace isn't enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
ifdef the entire struct k_mem_domain around CONFIG_USERSPACE,
this is specifically and only a userspace feature.
Add an incomplete definition for purposes of allowing the APIs
to be used with IS_ENABLED().
Prevents accidental useless instatiation of k_mem_domain structs.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This now has its own header instead of kernel.h. The code is
unchanged other than a forward declaration of k_tid_t.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Commit e80e655b01 introduced linker script
enforcement of Cortex-M vector table alignment. Update the i.MX RT boot
header to account for the possibility that the vector table may not be
placed at the address CONFIG_FLASH_BASE_ADDRESS +
CONFIG_ROM_START_OFFSET anymore.
For example, the RT1060 vector table has 176 entries and therefore must
be aligned to 0x400 bytes. If CONFIG_FLASH_BASE_ADDRESS=0x60000000 and
CONFIG_ROM_START_OFFSET=0x2200, the linker script will place the vector
table at 0x60002400 instead of 0x60002200.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
LOG_BACKEND_SPINEL_LEVEL turned out to be useless and was removed.
Also changes to keep coherence between Zephyr log level and OT log
level added by otPlatLog() were introduced.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
Many functions signal success by returning a return code of zero. Add
an assertion for this.
Some functions can return a positive value to indicate success, where
they want to convey some information. This is not handled by this
assert function.
Signed-off-by: Simon Glass <sjg@chromium.org>
One driver (mchp_xec) appears to have problems with setting the output
value before setting the direction, which can be caught if the order
of checks in the port setup function are reversed. Reconfigure the
output to a non-output state before the second test to see if that
catches the problem.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
If a runner supports the --erase option, make it so that the user can
add --no-erase to the command line to explicitly disable it.
Add a diagnostic at info() level whenever this option is requested.
The intent of this commit is to make it more obvious when a mass erase
was requested, especially in situations (like MCUboot with
CONFIG_MCUBOOT_TRY_MASS_ERASE=y) where this option may be turned on by
default.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add DT entry for the embedded QSPI NOR flash (GD25Q16) in the Adafruit
nRF52840 feather. Also added support for the spi_flash sample, which has
been used to verify the device.
NOTE: Device seems to fail when using high clock frequencies (e.g.
maximum QSPI frequency). It may be due to PCB layout issues.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Enable input buffer for both input and output pins.
The buffer must be enabled when the pin is used as
an input. Enabling the buffer enables reading back
the GPIO value when configured as output
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Fixes: #27375
This is a cleanup of the Zephyr CMake package export.
The code has been simplified so that the export now happens through a
CMake script. This avoids several generated CMake build files compared
to previous export mode, and thus removes the need for a CMake pristine
script.
A benefit of this cleanup is that it also fixes#27375.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This patch should improve couting and reporting of the number
of passed/skipped tests.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Sleep minimum time in RX when gPTP is enabled. Typically we
receive constant stream of gPTP protocol data so no need to
wait very long in that case and cause timeouts.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of unknown clock accuracy, set it to 1ms for native_posix
boards. This looks better in TSN monitor.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print role information next to port information. Also make
sure that port number is set correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Save some memory and separate common string snippets from larger
strings. In this case "does not match" sub-string is printed by
several warning prints so separate the sub-string from the bigger
string.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that native_posix Ethernet driver is claiming to support
VLAN when the VLAN functionality is enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add gPTP multiport support to native_posix Ethernet driver.
This means that the driver is able to create more than one
network interface and enable gPTP to each of them. This requires
that net-tools is updated as it contains configuration file
for network interfaces in host side.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove the macros CLOCK_ID_PRFX2 and CLOCK_ID_PRFX and replace them with
_CONCAT from common.h.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Added support for hardware flow control in EFM32 UART driver.
Signed-off-by: Timo Dammes <timo.dammes@lemonbeat.com>
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Return BT_HCI_ERR_INVALID_CONN_ID if an invalid handle is
given by the HCI; currently sometimes BT_HCI_ERR_CMD_DISALLOWED
is returned
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Use new KConfig switches to configure debug support.
Correct ADC configuration where all ADC pins are in ADC mode.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Currently JTAG debug is enabled by default.
In some designs is desirable to disable JTAG functionality.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Add overlay that includes only the shell transport of mcumgr, without
bringing in BLE as well. This can be used as an alternative for the
serial transport. The `smp_svr` README was updated accordingly.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
So far SMP shell transport was initialized in APPLICATION run level, but
shell over UART was initialized in POST_KERNEL. This could end up in
situation when received frames were scheduled for further processing in
SMP layer, when it was not initialized yet.
Export smp_shell_init() function declaration and call it before shell is
initialized with all its receive data handlers. This prevents situation
when data is scheduled for processing in SMP layer, when that one is not
ready yet.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Resolve a TODO item that followed the introduction of runners.yaml
files by removing the now-unused CMake cache variables that they
obsolete.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Using ZEPHYR_BOARD_FLASH_RUNNER relies on a cache variable that
happens to work but is not a supported feature. The appropriate
variable to set is simply BOARD_FLASH_RUNNER.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Avoid use of the cached_runner_config() helper, which we have a TODO
item to get rid of. Adjust the output and do some other minor
improvements.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Rolling yet another parser turns out to be the best way to let west
extensions respond to Kconfig values. See source code comments in the
patch for details.
The sanitylib library has some similar functionality but it isn't
exactly the same, and it gets strings wrong. For example, that parser
can't handle this option:
CONFIG_FOO="he said \"no\" to me"
This one can, and it has a couple of other features we'll find useful
for west extensions eventually besides.
(Not to mention that sanitylib also rolled its own CMake cache parser,
which also exists in west_commands.)
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
net: route: Add prefix-based ipv6 multicast forwarding
This adds/reenables the feature of multicast routing/forwarding.
The forwarding decision is based on the added multicast routes
and the new network interface flag:
NET_IF_FORWARD_MULTICASTS.
Signed-off-by: Jan Georgi <jan.georgi@lemonbeat.com>
Value of ret has been overwritten by flash_write_protection_set
before it could be returned from do_write_unaligned, which could
lead to reporting success when error code should have been returned.
Fixes#27641, Coverity-CID: 212142
Fixes#27642, Coverity-CID: 212143
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Variable "sd" is no longer referenced after refactoring in 2ed6b6a8ed.
It caused warning-as-error when building using sanitycheck, e.g. in CI.
This is 2nd fixed of the above refactor, after eb9a18432.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit fixes an issue when more than one USB transfer is
reserved for same OUT endpoint.
There are 2 scenarios when this could happen:
- The Host sends SET_CONFIGURATION(1) request twice.
- The Host triggers Suspend->Resume->Configured
event sequence for the device.
USB tranfers are not canceled on SUSPEND event
when the device was not configred previously.
Because of that USB transfer slot is reserved twice
for the same OUT endpoint and lead to shortage of USB
transfer slots quickly.
Without this patch CDC ACM class reserves duplicated USB
transfer slots for one transfer. The sequence of
Suspend->Resume events is genereted alongside with
Configured and the stack will shortly run out of transfer
slots.
If the Host, for some reason, decides to send
SET_CONFIGURATION request twice the same issue is seen.
This patch prevents from reserving additional USB transfer
slots twice.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
