This adds X86 keyword to the kconfigs to indicate these are
for x86. The old options are still there marked as
deprecated.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The app_kernel benchmarking app has the config file for benchmarking
with floating point enabled, but it was never used. So add it
to the testcase.yaml.
Note that this also limits to run on one CPU on a SMP system as
the resulting numbers would be more consistent among runs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When exiting Stop mode, if system clock is MSI, MSI oscillator is
selected as wakeup from stop clock; otherwise HSI16 oscillator is
selected.
Signed-off-by: Giancarlo Stasi <giancarlo.stasi.co@gmail.com>
Provide the LoRaWAN stack with an optional callback to be
called whenever the battery level needs to be read.
In the case of callback not being provided, the LoRaWAN
stack will report 255 (battery level unavailable) as per
the LoRaWAN spec.
Signed-off-by: Kuba Sanak <contact@kuba.fyi>
nxp_k2x.dtsi: Corrects Multipurpose Clock Generator binding
to utilize nxp,kinetis-mcg. Assign MCG to FlexTimer devices.
Enable FlexTimer clocks via System Integration Module clock
gate control registers.
Kconfig.defconfig.mk22f12: Enable default use of
CLOCK_CONTROL_MCUX_MCG when CLOCK_CONTROL is selected.
Signed-off-by: Ryan Holleran <rhollerar@gmail.com>
Include coverage support for device testing. It works by switching
capture_coverage to True (as it would meet coverage data start
pattern). Then we continue tot read coverage data until we get
coverage data end pattern. Otherwise, after receiving test result
pattern, we close serial console and do not get time to find start
coverage data pattern.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Introduce a dts board overlay on the nucleo_l053r8 board as this
board was used for testing addition of resolution setting on the
mcp9808 sensor driver.
Signed-off-by: Steven Daglish <s.c.daglish@gmail.com>
During the driver init, the function will set the sensor resolution
based on the driver's dts variable "resolution"
The driver's device tree has been updated to include the value
"resolution".
The default is set to the highest resolution of 0.0625C.
Moved mcp9808_reg_write from mcp9808_trigger.c to mcp9808.c
This allows resue of the same function in both the trigger and
resolution functions.
Function name changed to xxx_16bit to distinquish it from the 8
bit write function that will added.
Signed-off-by: Steven Daglish <s.c.daglish@gmail.com>
With addition of icount support ARC QEMU is now stable,
so we can finally enable it as default test platform.
This reverts commit 7d10b68baa.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Even though ARC QEMU has received advanced multiplication
instructions support recently the ARC QEMU in the latest
Zephyr SDK still misses them, so tinycrypt may execute
too long and reach timeout in case of execution on
slow host.
Disable tinycrypt for ARC QEMU platforms till we update
ARC QEMU in Zephyr SDK.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
In this CL, npcx_miwu_interrupt_configure is no longer responsible for
turning the interrupt off. Although the default state of WK_EN is
disabled, the users still have the chance to configure them when WK_EN
is enabled via npcx_miwu_irq_enable(). Hence, this CL also ensures that
WK_EN is disabled before configuring them.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL uses a simpler configuration approach that turns GPIO's
interrupts off instead of calling npcx_miwu_interrupt_configure
with NPCX_MIWU_MODE_DISABLED.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL moves def_lvol_io_list device-tree node from npcx7m6fb_evb.dts
to npcx7m6fb.dtsi. The benefit of it is that we needn't add
def_lvol_io_list node for each board dts file if there are no 1.8V
io-pads on the platform. If so, add them in the specific board dts file
directly.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This commit adds the nRF IEEE 802.15.4 Service Layer Fault Handler
to the 802154_rpmsg sample.
Signed-off-by: Czeslaw Makarski <Czeslaw.Makarski@nordicsemi.no>
This commit introduces runtime query of the HW Capabilities of
the nRF IEEE 802.15.4 Radio Driver.
Signed-off-by: Czeslaw Makarski <Czeslaw.Makarski@nordicsemi.no>
This commit brings in several latest bugfixes for the hal_nordic repo.
It also removes a Kconfig entry that these changes yield deprecated.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
This commit changes serialized radio initialization
priority. This fixes race condition where serialization
backend would boot earlier than the radio driver itself.
Signed-off-by: Pawel Kwiek <pawel.kwiek@nordicsemi.no>
Mark the PPI/DPPI channels and groups used by the 802.15.4 driver
as occupied and thus unavailable for allocation through nrfx_ppi.
Signed-off-by: Adam Zelik <adam.zelik@nordicsemi.no>
- Updated arduino dtsi to map spi1 as arduino spi
- Made board's zephyr peripheral mapping more compact and added arduino
and st-link labels.
Signed-off-by: Nikos Oikonomou <nikoikonomou92@gmail.com>
Simplify pm subsystem removing PM_STATE_LOCK option. Constraints API is
small and is a key component of power subsystem.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add posibility to configure UART_X device
based on board dts config.
Enable uart clock only if node is enabled
Signed-off-by: Pavlo Hamov <pasha.gamov@gmail.com>
This activates spi support for this soc. Closes#26428
```tests/drivers/spi/spi_loopback``` succeeded.
Signed-off-by: Bernhard Krämer <bdkrae@gmail.com>
