http_client_req() was supposed to return the number of bytes sent as a
HTTP request. The return value was not riht however due to some bugs in
helper functions:
* http_send_data() returned the current buffer position istead of the
number of bytes actually sent. This could result in counting the same
data into the total request size several times. A helper variable was
added to track how many bytes were actually sent to the network.
* http_flush_data() forwarded the return value of sendall() helper
function. That function however did not return number of bytes sent,
but 0 or a negative error code.
Additionally, change the return type of sendall() function - according
to standard the ssize_t type is only capable of holding -1 negative
value, but the function could return the full range of negative errno
values. Use int instead.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add Kconfig items that can be used to query if the current SoC
support the HW peripheral CTRLAP.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Using a const-qualified object in a static initializer is implementation
specific in C, and it does not work in GCC 7.
Before this change, `write_appearance` was a pointer object if
CONFIG_BT_DEVICE_APPEARANCE_GATT_WRITABLE was disabled. This change
removes that object in favor of a macro `GAP_APPEARANCE_WRITE_HANDLER`.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
There were wrong GPIOs assigned for antenna switches.
Used pins were assigned to other peripehrals so that
there were no outpus printed.
The samples should use GPIOs that are not assigned to any
peripheral.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add the Vref reference voltage in the DTS, so that the adc driver
can retrieve the value for conversion.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Fixes: #43835
In zephyr_library_compile_options() the existence of the compile
options interface library is checked and function returns if it already
exists. This results in #43835 meaning two libraries cannot add the
same option.
This commit fixes this by re-using the already created unique interface
library and link this to the Zephyr library.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
exclude newlib for posix testing as the MAX_HEAP_SIZE will be
too small if enabled NEWLIBC
fixing: #43873
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Adds operation "gather_footprint" after the build stage
with minor refactoring. Before footprints were collected
only at the very end of the twister workflow
and there were situations were elf files were not available any more
(for qemu and --runtime-artifact-cleanup used).
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
<zephyr.h> ends up pulling <sys/printk.h> via <kernel_includes.h>, so
simplify the sample.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When configuring the pwm capture, the callback function might
be reset, this i not an error. However the isr should not call it
and enabling the capture should always provide a callback function.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
There are tests failing sometimes due timeouts in simulators, slightly
increase the default timeout for these cases.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
ARMv8-R allows to set the vector table address using VBAR
register, so there is no need to relocate it.
Move away vector_table setting from reset.S and move it to
relocate vector table function as it's done for Cortex-M
CPU.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Timing registers of I2C 0/1/2 can be adjusted to pass SI test.
We can control the tSU;STA and tHD;DAT simultaneously by changing
the value of the register IT83XX_SMB_4P7USL, and we can control
the tSU;DAT by changing the value of the register IT83XX_SMB_250NS
as well.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
As mentioned in #42882, the I2C of IT8XXX2 is designed for two different
IP blocks, so this PR divides this I2C driver into two compatibles.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
A nordic hal update was made around the same time that anomaly 122 on
nrf52840 was fixed. This update introduced qspi_pins_deconfigure() in
the nrfx_qspi_uninit(). With that, the CS pin from QSPI becomes a
floating pin after anomaly 122 uninit is executed.
Set the CS pin high after the uninit to fix this.
I'm assuming that floating CS pins that are likely to experience EMI
can impact power consumption. That was the case with my custom board.
My custom board with nrf52840 and MX25R3235F running the hello_world
sample was consuming 2.3 mA before this patch, and 30 uA after
applying it.
Signed-off-by: Rodrigo Brochado <git.rodrigobrochado@gmail.com>
Values of boolean DT properties need to be checked with DT_PROP(),
not DT_NODE_HAS_PROP(). Fix two such incorrect calls in the nRF UART
driver.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This macro incorrectly uses DT_NODE_HAS_PROP() to check the truth value
of the "disable-rx" boolean property. In consequence, it always assumes
that RX is disabled and the low power mode needs to be used. Fix this
by replacing the check with DT_PROP().
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Using IRQ as source for interrupt values can
fail when installing irq_connect_dynamic, as
IRQ can previously be enabled. This updates
the logic to use source map and allows
default irq_enable() and irq_disable() to call
esp32c3 interrupt allocator implementation.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Avoid pre-empting scan window when extended active scanning.
If a scan request has been transmitted, then avoid being
pre-empted at the end of window when in continuous scanning.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The datasheet for both sam4s/same70 specifies that the NRST pin
is an input after reset, used as a user reset.
Add the user-nrst property to match the default.
Fixes#43306
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Fix power amp for transmitting of chain scan response
wherein capture of PDU end timestamp was missing causing
power amplifier from not being enabled for first chain PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The EATT support is optional for BAP. The specification mandates the
minimum MTU supported to be 64 bytes.
As per BAP_v1.0
"The Unicast Server shall support a minimum ATT_MTU of 64 octets for
one Unenhanced ATT bearer, or for at least one Enhanced ATT bearer
if the Unicast Server supports Enhanced ATT bearers."
The same applies for other BAP roles.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
With CMake 3.20 relative path inside DEPFILEs are treated relative to
CMAKE_CURRENT_BINARY_DIR and are transformed by CMake in its internal
dep file.
Therefore Zephyr build system must no longer add `base_name` to the
`-MT` argument for the preprocessor.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Kconfig.defconfig is the file meant for adjusting other Kconfig options
defaults. Also removed some redundant default conditions.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
After the ADC interrupt is enabled, the interrupt will be triggered
and the ADC channel valid data will be read, so there is no time
limit here.
Refer to the timeout is also set to K_FOREVER in the function of
adc_context_wait_for_completion().
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Add tests checking that secure network beacon interval cannot be
less than 10s and not more than 600s for a provisioned node.
Signed-off-by: Alperen Sener <alperen.sener@nordicsemi.no>
Fix auxiliary context from being flushed when scanner or
periodic synchronization is stopped, to avoid using the
disable_cb by both. Fixes an assertion when this race
condition happens.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Do not enqueue NODE_RX_TYPE_RELEASE into Auxiliary context
when stopping scanner, as this type is not to be passed to
HCI processing, which would lead to assertion.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix auxiliary context leak on stop, under race condition
where ULL High execution context does not release the
auxiliary context as stop has been requested, and done
has decremented the auxiliary context's reference count.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the order of Periodic Synchronize reset during HCI
Reset Command. Perform scan reset last after Periodic
Synchronize reset to avoid resetting the auxiliary
context which may be in use by Periodic Synchronize.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In 90c6dc5e7f, a change was introduced to
allow modem commands determine if they have enough data or not.
In a situation where some data is missing, the command should return
-EAGAIN and this should lead to another call of the command with more
data.
In this commit, the argument parser was also allowed to return -EAGAIN
to request more data due to missing arguments.
However, this can't work because in cmd_handler_process_rx_buf() before
calling process_cmd():
- we make sure that a CR/LF has been found.
- we compute match_len which can't be greater than the distance to the
next CR/LF.
Therefore, even if the command argument parser ask for more data by
returning -EAGAIN, next call will have the same value for match_len,
meaning that the parsing of argument will result in the same missing
argument situation.
This leads to an infinite loop of parsing the same data over and over in
an infinite loop.
This commit change this behavior to always drop the data in such a
situation. The command will not be answered and will therefore timeout,
but at least, next commands will correctly parse their returned data.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
Add initial support for the Salvator-X development board.
This work is strongly based on the H3ULCB board, but compared to it:
- device tree was enhanced
- adding all available push buttons and LEDs
- setting proper names according to the refdes used on the schematic and
PCB silkscreen
- documentation was adapted to this board
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This API has be removed in Zephyr 2.8, and does not need to be used
as a static function. Because flash_it8xxx2_write_protection(false)
is not supported. If the IT83XX_GCTRL_EPLR register in the
flash_it8xxx2_write_protection(false) is written as 1, the flash
write region will not be protected later, only be cleared by
power-on reset.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Update board flash partition to be compatible with v1.13.0 f/w.
This configuration is compatible with stm32wb5x_BLE_Stack_full_fw
which should be installed at 0x080C7000.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Users will usually not want to browse through these. Therefore it is
better to hide them a bit.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
