Modify the BAP and PBP samples to start with the profile name
(BAP or PBP) and the role of the sample.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix missing validation of Connection Update Ind PDU. Ignore
invalid connection update parameters and force a silent
local connection termination.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Pin thread to a specific cpu. Once thread gets cpu, check
the cpu id is correct and then thread will give up cpu.
Signed-off-by: TaiJu Wu <tjwu1217@gmail.com>
This commit has added new flag FS_O_TRUNC to support truncation
during file open. Modified fs_open to handle truncation based on
provided flags. Included unit tests for flag behavior with common
filesystems.
Signed-off-by: RAJAGOPALAN GANGADHARAN <g.raju2000@gmail.com>
Before #72243 Mbed TLS was not using
USE_PSA and all PSA features were not enabled. After #72243
if BUILD_WITH_TFM is set:
- USE_PSA in Mbed TLS is enabled by default and
- all PSA features are enabled.
This commits reverts both changes for tests/crypto/mbedtls
test case.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Random number generator is a subsystem and although it is mostly used
in crypto, this is not its only utility.
Move the current random number generator test to it is own space
(tests/subsys/random) and rename it to rng.
We need more and better tests for rng, this is an initial commit
to organize it and get ready for further tests.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Various SoCs have different limitations when it comes to DMA buffer
sizes. This change allows to chose a suitable value for them.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Fix the tests before a build time check is added to validate the
addressable size. Most tests have an eeprom size of 1024 defined but width
8-bit addressing, the majority of the eeprom cannot be addressed
Signed-off-by: Bram Vlerick <bram.vlerick@openpixelsystems.org>
Exclude the Apollo4 platform from LLEXT tests for now,
as they currently break CI due to #72775.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
When using the post_init_f to initialize the `bst_result`,
it is not possible to mark the test as
passed immediately as the `bst_result` will be
initialized after the test completes.
This change should overcome this limitation.
Bluetooth mesh tests are kept as is as we are not
sure if this will change the behavior.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Add possibility to test all four SPI modes (CPOL, CPHA).
Add possibility to test different bitrates.
Add tests that checks handling of zero length buffers on master.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Add overlay file for nrf54h20.
Align code and DTS between spi_error_cases and spi_controller_peripheral.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Rename the current sensor_read to sensor_read_async_pool and create a
new blocking sensor_read helper.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
- Adds boot_request_upgrade() return value check.
- Avoid repeating resets if the upgrade request fails.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
The 'tfm' tag was removed from the samples in in
7c80473e0a but it remained in use in other
parts of the project.
This change brings back consistency through out the project.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
The deprecated gsm_ppp modem driver will be removed. Remove
gsm_ppp modem driver from build_all test suite.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
In order to be compatible with Linux AF_PACKET socket calls, the
protocol field needs to be in network byte order.
So for example, if user wants to receive all packets, then the
protocol field needs to be set as "htons(ETH_P_ALL)".
See Linux manual page at
https://www.man7.org/linux/man-pages/man7/packet.7.html
for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When tests control the LwM2M client entirely through
shell, we should be able to set the RD client context
from the application without causing RD client to
start registration.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
This commit fixes#73337.
Before #72243 Mbed TLS was not using
USE_PSA and all PSA features were not enabled. After #72243
if BUILD_WITH_TFM is set:
- USE_PSA in Mbed TLS is enabled by default and
- all PSA features are enabled.
This commits reverts both changes for net.socket.register.tls
test case.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Refactor CSIP btp commands by removing the 'count' parameter from
set_coordinator_lock and set_coordinator_release functions.
If we want to support lock/release procedure on subset of set members
in the future, 'count' param doesn't indicate a specific set member.
Instead, introduce 'address_count' and 'addr' array params, although their
usage is not yet implemented.
Signed-off-by: Piotr Narajowski <piotr.narajowski@codecoup.pl>
native_sim//64 is one of the allowed platforms
but lacks an overlay which causes the test to fail
to build.
Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Display diff of contents for large buffers is not quite helpful and
takes up huge RAM, and if a board has less RAM then this causes the test
module build failures.
So, disable display of diff and just log a failure, small buffer tests
can be used to debug such basic issues and large buffer tests can act as
a smoke test for debugging other issues. This saves about 80K of RAM.
Fixes#72792.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
When verifying sw_isr_table, take into account custom offset,
like `CONFIG_RISCV_RESERVED_IRQ_ISR_TABLES_OFFSET` in some
RISC-V SoCs.
Relates to #71948 and #73232.
Signed-off-by: Marcin Szymczyk <marcin.szymczyk@nordicsemi.no>
Adding a separate overlay for nrf54l15 flpr is required because
running tests on console uart fails.
Signed-off-by: Jakub Zymelka <jakub.zymelka@nordicsemi.no>
Callbacks were a bit neglected in terms of test coverage, especially
when used in chains. It was clear from the code that chained callbacks
may not actually work, and callback ordering then was hard to verify.
Test callbacks chained to transactions work as expected.
The test iodev had built up some cruft over time and in the process
showed a few bugs once callback chaining was fixed so the test iodev now
better matches typical iodev implementations at this point.
Cancellation testing now includes an added case for cancelling a the
second submission in the chain prior to calling submit noting that no
completions notifications should be given back for those.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
- `stm32h745i_disco/stm32h745xx/m4` says "#error Flash driver on M4 core
is not supported yet".
- `mpfs_icicle/polarfire/smp` fails in the compilation of the `spi_nor`
flash driver.
- `cyw920829m2evk_02` fails to build because of undeclared
`cyhal_nvm_*()` functions.
As a bonus, group the excluded platforms under the common part to
avoid repeating them.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Remove the `_MAC` part because those Kconfig options enable only hash
algorithms, nothing MAC-related, and the `_ENABLED` part to align the
naming to the Mbed TLS defines (plus we don't need such a part).
As a bonus, enabling SHA-256 does not automatically enable SHA-224
anymore.
See the migration guide entries for more details on the practical
changes.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Namespaced the generated headers with `zephyr` to prevent
potential conflict with other headers.
Introduce a temporary Kconfig `LEGACY_GENERATED_INCLUDE_PATH`
that is enabled by default. This allows the developers to
continue the use of the old include paths for the time being
until it is deprecated and eventually removed. The Kconfig will
generate a build-time warning message, similar to the
`CONFIG_TIMER_RANDOM_GENERATOR`.
Updated the includes path of in-tree sources accordingly.
Most of the changes here are scripted, check the PR for more
info.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The `z_nrf_grtc_timer_get_ticks()` function converts system ticks
to GRTC ticks. It gets the current system tick to calculate an
absolute GRTC value. The same does the test function to provide
an argument to be converted. If the system tick occurs between those
`sys_clock_tick_get()` calls the `z_nrf_grtc_timer_get_ticks()` will
take into account the newer tick while the test estimate bases on
the old tick value. Due to that the maximum result error is 1 system
tick minus 1 GRTC tick which equals (`CYC_PER_TICK` - 1) for GRTC
ticks.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
Before this commit, the following bugs were present:
- When `CONFIG_BT_FILTER_ACCEPT_LIST` was set, connection establishment
was cancelled upon RPA timeout. This required the application
to restart the initiator every RPA timeout.
- When `CONFIG_BT_FILTER_ACCEPT_LIST` was not set, the RPA was not updated
while the initiator was running.
This commit unifies the RPA timeout handling for both these cases.
Upon RPA timeout the initiator is cancelled and restarted when
the controller raises the LE Connection Complete event.
The workqueue state is checked when restarting the initiator to prevent
it being restarted when the timeout is hit.
Corresponding test cases have been added to ensure that this
feature works.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Expectation: After calling `bt_disable()` it is possible to
use the Bluetooth APIs as if `bt_enable()` was never called.
This was not the case for `bt_id_create()`, it was not possible
to set the default identity. This prevented an application
developer to restart the stack as a different identity.
Keys also need to be cleared to avoid the following pattern:
1. Pair two devices
2. Central calls `bt_disable()` and `bt_enable()`.
The central will now generate a new identity address.
3. Connect the two devices.
4. Re-establish encryption. Now the central will try to use
the previously used keys. The procedure will fail
because the peripheral does not have any keys associated
with the new central address.
The API documentation is updated accordingly.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
The test needs couple of more socket/file descriptors to work because
CONFIG_POSIX_API creates three more file descriptors namely the
stdin, stdout and stderr descriptors.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Test on STM32H573i disco board , only the Tx transfer is ok.
Signed-off-by: Franck Thebault <franck.thebault@st.com>
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
