Use BT_CONN_TX_USER_DATA_SIZE when defining pools of buffers that will go
through `bt_conn_send_cb()`.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Enfore a minimum duration between edges on the IRQ pin to give the HCI
controller time to detect the state change. Without this delay and with
several packets queued on the `rx_queue`, the pin could be re-asserted
almost immediately after being cleared.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Some samples, tests got missed in the switch from void main() to
int main(). Cleanup those samples/tests to use int main().
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
With the minimal C library malloc implementation moving to libc/common, all
of the related Kconfig variables have also changed. Update uses within the
tree.
Signed-off-by: Keith Packard <keithp@keithp.com>
`bt_conn_le_create` returns a signed value. Error message format string
expects an unsigned value.
This commit changes the expected value in the format string to a signed
one, to match what `bt_conn_le_create` returns.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Avoid hitting the assert
```
__ASSERT_NO_MSG(net_buf_simple_tailroom(buf) >= len);
```
when the provided buffer is longer than we can fit. Instead discard the
packet and log an error.
This handling is similar to packets are discarded in hci_uart
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Add a new sample that demonstrate the following points:
- Exchange of Key Material;
- Advertising encrypted data;
- Read advertising data;
- Decrypt advertising data that are encrypted.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Main now has a int return type.
Fix return values, so this sample can be compiled.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This applies the coccinelle script to another set of files:
samples/bluetooth/bthome_sensor_template/src/main.c
samples/boards/stm32/power_mgmt/standby_shutdown/src/main.c
samples/drivers/smbus/src/main.c
samples/drivers/virtualization/ivshmem/doorbell/src/ivshmem.c
samples/fuel_gauge/max17048/src/main.c
samples/hello_world/src/main.c
samples/sensor/proximity_polling/src/main.c
samples/subsys/logging/ble_backend/src/main.c
tests/drivers/build_all/mfd/src/main.c
Signed-off-by: Keith Packard <keithp@keithp.com>
As both C and C++ standards require applications running under an OS to
return 'int', adapt that for Zephyr to align with those standard. This also
eliminates errors when building with clang when not using -ffreestanding,
and reduces the need for compiler flags to silence warnings for both clang
and gcc.
Most of these changes were automated using coccinelle with the following
script:
@@
@@
- void
+ int
main(...) {
...
- return;
+ return 0;
...
}
Approximately 40 files had to be edited by hand as coccinelle was unable to
fix them.
Signed-off-by: Keith Packard <keithp@keithp.com>
The platform nrf52_bsim was specified as an integration platform,
but was missing from the allow list.
This commit adds this platform to the allow list.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Fix broadcast audio source and sink samples' conf file to
use Broadcast ISO feature in Zephyr Bluetooth Controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The init infrastructure, found in `init.h`, is currently used by:
- `SYS_INIT`: to call functions before `main`
- `DEVICE_*`: to initialize devices
They are all sorted according to an initialization level + a priority.
`SYS_INIT` calls are really orthogonal to devices, however, the required
function signature requires a `const struct device *dev` as a first
argument. The only reason for that is because the same init machinery is
used by devices, so we have something like:
```c
struct init_entry {
int (*init)(const struct device *dev);
/* only set by DEVICE_*, otherwise NULL */
const struct device *dev;
}
```
As a result, we end up with such weird/ugly pattern:
```c
static int my_init(const struct device *dev)
{
/* always NULL! add ARG_UNUSED to avoid compiler warning */
ARG_UNUSED(dev);
...
}
```
This is really a result of poor internals isolation. This patch proposes
a to make init entries more flexible so that they can accept sytem
initialization calls like this:
```c
static int my_init(void)
{
...
}
```
This is achieved using a union:
```c
union init_function {
/* for SYS_INIT, used when init_entry.dev == NULL */
int (*sys)(void);
/* for DEVICE*, used when init_entry.dev != NULL */
int (*dev)(const struct device *dev);
};
struct init_entry {
/* stores init function (either for SYS_INIT or DEVICE*)
union init_function init_fn;
/* stores device pointer for DEVICE*, NULL for SYS_INIT. Allows
* to know which union entry to call.
*/
const struct device *dev;
}
```
This solution **does not increase ROM usage**, and allows to offer clean
public APIs for both SYS_INIT and DEVICE*. Note that however, init
machinery keeps a coupling with devices.
**NOTE**: This is a breaking change! All `SYS_INIT` functions will need
to be converted to the new signature. See the script offered in the
following commit.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
init: convert SYS_INIT functions to the new signature
Conversion scripted using scripts/utils/migrate_sys_init.py.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
manifest: update projects for SYS_INIT changes
Update modules with updated SYS_INIT calls:
- hal_ti
- lvgl
- sof
- TraceRecorderSource
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: devicetree: devices: adjust test
Adjust test according to the recently introduced SYS_INIT
infrastructure.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: kernel: threads: adjust SYS_INIT call
Adjust to the new signature: int (*init_fn)(void);
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove qemu_cortex_m3 from various bluetooth tests and samples since
they enable NVS which requires CONFIG_FLASH_PAGE_LAYOUT which is
not supported on qemu_cortex_m3 since there is no flash driver.
We get build failures with the arm-clang compiler because nvs.c
is referencing z_impl_flash_get_page_info_by_offs which does not
exist.
Switch to qemu_x86 as the integration_platforms if it was
qemu_cortex_m3 before.
Removed the bluetooth.mesh.mesh_shell.reduced_legacy as this was
added specifically for building on qemu_cortex_m3.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Add support for the Scan Delegator for the Broadcast
Audio Sink sample. This include advertising connectable
as well as handling PAST.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Per the BAP specification, if the Broadcast Sink role is
supported, then the Scan Delegator shall also be supported.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix RAM overflow building for direction finding feature on
nRF53 Series, by reducing thread stack sizes. And move
building DF plus CIS feature to hci_uart sample from
hci_rpmsg sample.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix RAM overflow by using default values for
BT_BUF_ACL_RX_SIZE and BT_BUF_ACL_RX_COUNT. Default Rx size
of 27 is sufficient for nRF51 SoC, as it does not support
data length extensions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
The unicast client used the BT_DATA_UUID16_SOME and
BT_DATA_UUID16_ALL instead BT_DATA_SVC_DATA16 for
discovering ASCS servers.
BT_DATA_SVC_DATA16 is the right one to use, as that
is mandatory for a server to advertise, and the UUID
ones are only recommended. Furthermore, the service data
of the ASCS server can now also be retrieved.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
From now app layer is able to return explicit response code and
reason that will appear in ASE Control Point notification.
Fixes issues of ASCS/SR/SPE/BI-(07/08/09)-C PTS test cases, where
PTS was receiving wrong response codes and reasons.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
Add kconfig to let the ISO broadcast and ISO receive samples report
packets no more than once per set interval of packets.
Signed-off-by: Frode van der Meeren <frode.vandermeeren@nordicsemi.no>
Some recent PRs included conditional compilation for
KCONFIG_BT_LL_SW_LLCP_LEGACY, which must be removed.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
This commit removes the legacy LLCP code including the
Kconfig option
It also updates the babblesim tests, and removes the
tests for the legacy controller
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
To enable Bluetooth controller coexistence feature, there is
implementation of ticker task, which aborts any ongoing radio events
during assertion of the grant pin. This solves the co-existence issue
in the role of the subordinate transceiver.
Signed-off-by: Tomáš Beneš <tomas@dronetag.cz>
Remove duplicated board specific conf file for iso_broadcast
and iso_receive samples. Instead, have an overlay conf file.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Several places used the bt_audio prefix where it shouldn't.
Also moved the BAP documentation to its own file.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added a new header file bap_lc3_preset.h which contains
the definitions of the LC3 (pre)sets defined by the
BAP spec.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the bt_audio_unicast_client API to bt_bap_unicast_client
and move the API to bap.h
Also adds the _bap_ infix to the bt_unicast_client functions.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
