Instead of forcing use of NEWLIB_LIBC, select any available complete C
library implementation. Add CONFIG_REQUIRES_FLOAT_PRINTF and adjust
CONFIG_LIBC_MALLOC_ARENA_SIZE as needed.
Signed-off-by: Keith Packard <keithp@keithp.com>
In the iso_receive sample, the semaphores were not reset in
each iteration.
This caused the ISO receiver to act incorrectly and cause
issues with some controllers.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The BT Core Spec v5.4 allows separate SDU_Interval to
be set on C_To_P and P_To_C directions,
but this is not possible with the existing interface.
This PR splits the interval parameter in the call to
bt_iso_sig_create into one for C_To_P
and one for P_To_C
It also splits the latency parameter into one for
C_To_P and one for P_To_C
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Bluetooth: ISO: update UI for extended API
The API for setting the SDU interval and latency have been updated.
This PR also updates the setting of these by the user in the shell
and the iso_connected_benchmark sample
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Add additional RX stats for the BAP broadcast sink so that a
user can easily follow how well the RX is working, and
for several streams.
This also adds some additional logging to better see
what we are syncing to.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Refactor the codec_cfg_get_frame_duration function to return the
assigned numbers value, instead of a converted value, but with
support for converting the value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the Kconfig option from BT_ISO_ADVANCED to
BT_ISO_TEST_PARAMS to more explicitly denote that it
enables support for using the ISO test parameters.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In the broadcast_audio_sink sample there are two pointers defined,
both referencing the same address. We reduce this to one pointer
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
rand32.h does not make much sense, since the random subsystem
provides more APIs than just getting a random 32 bits value.
Rename it to random.h and get consistently with other
subsystems.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
When using multiple streams the seq_num provided to the
controller would be incorrect as we used a single global
seq_num rather than a proper seq_num per stream.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update babblesim tests for testing chaining for advertising to ensure that
we spill over to the next PDU
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Updates the chaining for advertising.
Instead of unconditionally adding a new PDU when new data
is added we now instead fill the last PDU in the chain with
the incoming data, only adding a new PDU when there is
not enough room.
This reduces the nr. of PDUs used for advertising, and also
fixes some qualification failures
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Update the function name from codec_cfg_get_chan_allocation_val
to just codec_cfg_get_chan_allocation, and add
codec_cfg_set_chan_allocation.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Refactor the codec_cfg_get_freq function to return the assigned
numbers value, instead of a converted value, but with
support for converting the value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This sample is an alternative implementation of hci_uart. The new sample
differs from the existing sample in that it uses the async UART API
instead of the interrupt driven API.
Included in this commit is a new test for HCI UART flow control. It's
enabled for hci_uart_async. The test can excercise also the existing
hci_uart sample (with some minimal changes to allow compiling in the
mock controller and test suite). The existing hci_uart sample currently
fails the flow control test.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Fix missing Coded PHY implementation conditional compile
causing compile error when disabling Coded PHY support in
SoCs that have radio that support Coded PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Replace the BT_AUDIO_CODEC_LC3_ID macro with the
BT_HCI_CODING_FORMAT_LC3 as there is no reason to
define and use the LC3 ID different than the other
allowed codec IDs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify the bt_bap_broadcast_source_reconfig to use the same
parameter struct as bt_bap_broadcast_source_create so that
the two are more similar, since they both set the same values.
This allow for full control of which subgroups and stream
are updated.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use the defind value, BT_APPEARANCE_WEARABLE_AUDIO_DEVICE_EARBUD,
instead of the hard coded "magic numbers".
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The sample did not properly include the source
context in the advertising data.
It also set different contexts for PACS and the advertising data
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Convert the driver to a dt-based device. Also update Kconfig so that it
depends on the right compatible being enabled, initialize in POST_KERNEL
(APPLICATION should not be used for devices) and remove one redundant
include.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
- Updated basic samples READMEs to use the new zephyr:code-sample::
directive. Dropped "-sample" suffix that's not required anymore now
that samples have their own namespace.
- Updated all references to the samples to use the :zephyr:code-sample:
role. Checked and updated the wording of said references to account
for the fact that samples should not have "... sample" in their name
anymore.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The logs were not visible when an assert fired on the controller and
`CONFIG_BT_HCI_VS_FATAL_ERROR` was not set.
Putting the logs in panic mode before entering the infinite loop fixes
that.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Remove the qos field from
bt_cap_unicast_audio_start_stream_param as it was not used.
The QOS values are set when creating the unicast group,
and not when starting the streams.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Refactor the bt_audio_codec_cfg to use flat arrays to store
metadata and codec specific configurations.
The purpose of this is to make it easier to copy the data
between layers, but also to support non-LTV data for non-LC3
codec configurations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This removes odd `subscribe` parameter from bt_tbs_client_discover
function parameters list. As the API user enables specific
CONFIG_BT_TBS_CLIENT_* option, the client implementation should
subscribe to the characteristic notifications so that the user receives
the value updates.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
As the metadata has to be validated anyway, let the initial vaidation of
metadata to be done in ASCS. The application can still reject the
metadata, but the length validation and supported type validation can be
performed by the stack.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Since the driver can now be also used on nRF91 Series, its name need to
be updated to not cause confusion.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add `yd_esp32` board:
- Model name: YD-ESP32
- Manufacturer: VCC-GND® Studio
- Espressif module: ESP32-WROOM-32E
Signed-off-by: Julio Cesar <hi@jcsx.dev>
There is no reason why the capabilities
should be modified by the stack after registration,
nor any reason why a the unicast client application
needs to modify the reported remote capabilities, so
all have been marked as const.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Refactor the bt_audio_codec_cap to use flat arrays to store
metadata and codec specific capabilities.
The purpose of this is to make it easier to copy the data
between layers, but also to support non-LTV data for non-LC3
codec capabilities.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The broadcast sink API has been modified so that all scanning, etc.
will be done by the application, rather than the stack. This commit
updates the sample to use this updated API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The broadcast sink API has been modified so that all scanning, etc.
will be done by the application, rather than the stack. This commit
updates the sample to use this updated API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add (optional) advanced ISO support for the benchmark ISO
sample. The CONFIG_BT_ISO_ADVANCED Kconfig simply needs to
be enabled in order to support the advanced settings.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add (optional) advanced ISO support for the benchmark ISO
sample. The CONFIG_BT_ISO_ADVANCED Kconfig simply needs to
be enabled in order to support the advanced settings.
This also reduces the number of default channels supported
to 1.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove virtual esp32 board and replace it with the
real word boards:
- esp32_devkitc_wroom
- esp32_devkitc_wrover (with PSRAM option)
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Add two TMAP broadcast sample applications.
tmap_bms implements the Broadcast Media Sender role. It uses CAP
Initiator broadcast APIs to broadcast an audio stream.
tmap_bmr implements the Broadcast Media Receiver role. It scans and
syncs to the PA having filtered the EA by the presence of TMAP role
information. It also instantiates the VCP.
Signed-off-by: Silviu Petria <silviu.petria@nxp.com>
This intoduces dedicated Kconfig option to enable TBS client,
that makes the configuration more intuitive.
While configuring GTBS only, the user does not have to explicitly set
the BT_TBS_CLIENT_MAX_TBS_INSTANCES to 0 to disable the TBS client
functionality.
This adds also `tbs_only_client` test case to test the TBS only build
option.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Use the ISO Data sent callback in iso_broadcast sample to
synchronize the ISO data send. ISO Data sent callback is
generated every SDU interval corresponding to the number of
completed packets event generated by the Controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
