Monolithic build is enabled by default and it
requires the presence of the binary blobs.
CI will fail since it doesn't fetch them
to the environment. To avoid this
monolithic for BT app is disabled.
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
Make `struct arch_esf` compulsory for all architectures by
declaring it in the `arch_interface.h` header.
After this commit, the named struct `z_arch_esf_t` is only used
internally to generate offsets, and is slated to be removed
from the `arch_interface.h` header in the future.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Enable PM by default for rd_rw612_bga
on peripheral_ht and central_ht
samples
Those are the BLE samples running on
the CI, so it will be better to also
check the builds with PM and also
have some BLE apps to try PM with.
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
Removes the CIS connection establishment from bt_bap_stream_start
and move the behavior to a new funciton bt_bap_stream_connect.
This has 2 advantages:
1) The behavior of bt_bap_stream_start is much more clear and more aligned
with the spec's behavior for the receiver start ready opcode.
2) It is possible to connect streams in both the enabling
and the QoS configured state with bt_bap_stream_connect as
per the spec. This allows us to pass additional PTS test cases.
To implement this new behavior, samples and tests have been updated.
The CAP Initiator implementation has also been updated
to accomodate for the change in BAP, but the CAP
initiator implementation should work the same for application, except
that it's now possible to do unicast start on ASEs in any order
(https://github.com/zephyrproject-rtos/zephyr/issues/72138).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify the BAP and PBP samples to start with the profile name
(BAP or PBP) and the role of the sample.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The BAP broadcast source sample did not properly use
parentheses for the macro, potentially causing issues.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Building for this target ensures we keep in mind resource-constrained
microcontrollers when making changes in Bluetooth.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This patch removes all uses of the adv auto-resume feature in the
Bluetooth samples. The auto-resume feature is planned for deprecation.
Samples that are not intended to demonstrate a technique to do with
re-connection simply do not restart the advertiser, in interest of
simplicity. The user is expected to reboot the sample when needed.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Add missing configuration files for the nRF5340DK
and missing configuration values for the unicast
samples w.r.t. buffer sizes and encryption.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The condition was the inverse of what it should have been, leading to an
inevitable NULL pointer dereference later.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Build the vendor specific sample hci_vs_scan_req for
BT_LL_SW_SPLIT variant of the Controller only.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adding bt_tester support.
Adding bt_tester app build
with Twister for rd_rw612_bga board
Fix failing tests/samples due to unsufficent MPU ressources
by releasing unnecessary MPU regions.
Disable twister build on samples that are not meant to
be supported on this board, so exclude it from the test cases.
Update peripheral/central ht sample.yaml files
to test build for rd_rw612_bga.
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
Implement a function bt_audio_get_chan_count that takes an enum
bt_audio_location and returns the number of channels in that value.
This PR fixes#69617
(https://github.com/zephyrproject-rtos/zephyr/issues/69617)
Signed-off-by: Babak Arisian <bbaa@demant.com>
Several places we simply had
/* Create a non-connectable non-scannable advertising set */
regardless of the type of advertising it was.
Modified the comment to omit the scannable part
and corrected the connectable part.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use Link Time Optimisation (LTO) when building Controller
with Isochronous channels support.
nRF53x SoCs has 256KB flash and using speed optimisation,
which is the default today, overflows flash when adding
new features related to ISO support.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Since the CSIP API expects a set member struct for nearly all
functionality, the reference to the full set member (along with
the CAS specific CSIS) should be given to the application.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When Broadcast Sink is connected to Broadcast Assistant then keep
connection when Broadcast Source is removed.
Signed-off-by: Jens Rehhoff Thomsen <jthm@demant.com>
The naming of these two options was problematic, since it's both of them
are about vendor extensions, even though one has _EXT in the name and
the other doesn't. Just merge one option into the other. This has a
slight overhead on the controller side of enabling some more vendor
features if BT_HCI_VS is enabled, but that should hopefully be
acceptable.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Derive BT_CTLR_ISO_TX_BUFFER_SIZE from BT_ISO_TX_MTU to have
optimal Controller memory allocations.
BT_CTLR_ISO_TX_BUFFER_SIZE can be set lower than
BT_ISO_TX_MTU in which case upper layer can send fragmented
SDU to the Controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When in the BAP unicast server role, at least PAC sink
or PAC source shall be set.
In order to fulfill this new requirement, a few other Kconfig
options had to be changed to a `depends on` from `select` to
avoid recursive Kconfig requirements. This change may require
some applications to update their configurations according
to the migration guide.
The change from `select` to `depends on` is ideal anyhow
as that is the recommended way to add dependencies.
This can checked via the combined BT_PACS Kconfig value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In most cases these were defined as 1. Saving one byte for the rest
doesn't really justify the added complexity that comes with these
options. Removing them also simplifies the interface between HCI
transports/drivers and the host stack, which in turn helps pave the way
for having HCI as a proper Zephyr driver API.
Fixes#71907
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Example of usage of HCI vendor specific Set Scan Request Reports
command, Scan Request Received Event and corresponding callback
to get application events. The sample application shows usage as an
alternative to extended advertisent saving precious RAM.
Signed-off-by: Giancarlo Stasi <giancarlo.stasi.co@gmail.com>
With the deprecation of `BT_LE_ADV_OPT_USE_NAME` and
`BT_LE_ADV_OPT_FORCE_NAME_IN_AD` samples were updated to not use the
macro adding the device name in the advertising/scan response data
anymore.
Instead the name was explicitly added to the scan response data in
`periodic_adv` sample. But because it was using an extended advertiser
and was already adding data in the AD, the name should have been put in
the advertising data and not the scan response data.
Update the sample to add the device name in the advertising data.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Add support for using sysbuild for central_hr and
peripheral_hr samples so that hci_ipc sample is built
for nRF53x SoCs boards.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update central_hr sample to support using extended
advertising and hence be long range compatible on SoCs
that support Bluetooth Low Energy Coded PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add LED blinking state to peripheral_hr indicating
advertising state, and LED On state to indicate connected
to a central device, respectively.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update peripheral_hr sample to support using extended
advertising and hence be long range compatible on SoCs
that support Bluetooth Low Energy Coded PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
There are several esp32-based boards that its conf and overlay
files are missing proper renaming to match cpu cluster.
This also removes all _SOC_ name from files.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The advertiser options to automatically add the name in the scan
response and the advertising data will be deprecated.
Update the samples that were using those options by explicitly adding
the device name in the advertising data or the scan response data.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Add default configuration related to BLE protocol,
for Application and Radio core on nRF54h20 platform.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
The periodic advertiser samples use a periodic advertising interval
in the range of 1 to 1.2 seconds.
Previously the sync timeout of 1.7 seconds would cause the sync to be
lost after failing to receive a single periodic advertising packet.
This change therefore aims to improve the user experience.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Update comment about use of NRF_DEFAULT_IRQ_PRIORITY in
hci_ipc sample for Nordic nRF53x series.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression in BT_RX_STACK_SIZE use due to
commit b91728619c ("Bluetooth: host: remove
`CONFIG_BT_RECV_BLOCKING`").
Profiling of Controller Rx thread has been mentioned in
commit 586ba9fd13 ("Bluetooth: Controller: Increase
BT_RX_STACK_SIZE for BT_HCI_RAW enabled").
Also, move the TX_STACK_SIZE value as default in Kconfig
from the explicit value being set in hci_ipc sample.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove IPSP support from the tree.
It has no maintainers, and is regularly broken. The fact that it's
nontrivial to set-up in linux makes it hard to fix reported issues.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
The commit adds dependency on Kconfig FLASH_PAGE_LAYOUT to subsystems
that really require it:
FCB, NVS, LittleFS
and removes direct selection from '*.conf' files where no longer
needed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Adjustments of overlay and conf files to adjust for the MERGE removal.
The revert of MERGE requires specific overlay and conf files for boards
which relied on the MERGE feature.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add support for supplying a broadcast code to the
broadcast audio sample, which will, if non-empty, encrypt
the broadcast.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
There are required DTS entries to nable peripherals required
for IPC communication between Radio and APP CPUs.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
