Simplify driver implementation by using spi_dt_spec. Note that driver
has 2 SPI configurations, identical except the speed. For this reason,
the slow config is still kept in RAM and copied from the one obtained
via the SPI dt_spec macros. A better solution would be to have macros
that allow to override the SPI frequency, but this can be improved
later. Most internal helpers have been adjusted to accept a device
reference to make SPI (and future GPIO) transition easier.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Due to serialization restrictions radio api calls cannot be nested, any
violation of this rule leads to a deadlock. This commit fixes the bug
by transferring the nested radio api call to ot_radio_workq.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
For multicore devices like nRF53, shim layer part of setting mac keys
and frame counters is called on application core where
CONFIG_NRF_802154_ENCRYPTION is disabled (the define concerns radio
driver for net core). This commit replaces
CONFIG_NRF_802154_ENCRYPTION with CONFIG_IEEE802154_2015.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Replace all get_dev_data()/get_dev_config() accessor utilities with
dev->data and dev->config.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When the csl is active the nrf_802154_sleep() is called unnecessary.
This commit fixes it.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
This commit fixes compilation warning (unused variable)
generated in nrf5_config_mac_keys function, when the ASSERT
macros were disabled.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
This commit updates the ieee802154 driver to match the current feature
set of the nRF 802.15.4 radio driver for nRF53 SoCs.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
- B91 SoC requires to set RX mode again if channel is changed
- Fixed wrong ACK packet detection, mask should be used
Signed-off-by: Yuriy Vynnychek <yura.vynnychek@telink-semi.com>
Driver has dedicated workqueue for IRQ processing.
Submit work to dedicated workqueue intead of system workqueue.
It also fixes driver functionality when NET_TC_TX_COUNT is set to 0.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Define a custom IEEE802154 based L2. The user can then use those symbols
to implement their own 802.15.4 based L2, based on those symbols, w/o a
need to modify the Zephyr tree.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Some 802.15.4 L2 implementations expect that FCS length is included in
the overall packet length while others not. Allow to configure this
behavior, based on the selected upper layer.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Introduce a common config for all 802.15.4 based L2 implementations.
This way, any custom 15.4 L2 implementation will be able to
automatically enable use 15.4 driver, w/o a need to modify the actual
Kconfig.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The print specifier for `atomic_t` should be updated
to `%ld`, `%lu`, or `%lx` to account for the type
change of `atomic_t` to `long`.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
When a frame is sent with a cleared ACK request bit, the transmit
metadata contains a NULL pointer to the ACK frame.
The pointer must not be dereferenced in such case.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
This commit makes nrf5_config_mac_keys function more generic.
Is uses lookup table for storing keys to override. It removes old keys
before storing new ones.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Convert cc2529 driver to `spi_dt_spec` and `gpio_dt_spec`. Required a
whole driver conversion from passing around the driver data struct to
passing around the driver itself.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Convert cc1200 driver to `spi_dt_spec` and `gpio_dt_spec`. Required a
whole driver conversion from passing around the driver data struct to
passing around the driver itself.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
When ack data for extended address is set with the
nrf_802154_ack_data_set function, the extended address
must be reversed to the IEEE 802.15.4 address transmit
order in order to be properly matched.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit aligns the nRF5 ieee802154 driver with the latest
API changes necessary to handle security-related flags properly.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
When stopping the interface, also abort the RX routine and enable RF
power saving. Will re-start RX on iface start.
Also fixed a bug with `cmd_fs` crashing at RF wakeup because `rf_mode`
was allocated on stack.
Signed-off-by: Stancu Florin <niflostancu@gmail.com>
When frame counter is managed by the radio driver the upper layer
needs to be informed about the frame counter changed. The upper layer
looks for the most recent frame counter in the transmitted frame,
this is why the tx_payload need to be updated after processed by
the radio driver.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
This commit extends the capabilities of the nRF IEEE 802.15.4 radio
driver with IEEE802154_HW_TX_SEC capability.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Copy back the TX buffer content back into the upper layer
in case of a TX failure.
This is necessary in when frame encryption by the radio driver
is used. The shim layer for the nRF5 driver has a buffer, that
is used by the driver to authenticate and encrypt the frame
in-place. In case of a TX failure, the buffer contents
are propagated back to the upper layer. The upper layer
must use the same secured frame for retransmission.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Use the nrf_802154_retransmit_csma_ca_raw and
nrf_802154_retransmit_at_raw API to retry the frame transmission
after a failed attempt.
The retry must be performed only in response to
a nrf_802154_transmit_failed event.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Function 'nrf_802154_transmitted_timestamp_raw' is not serialized and
connot be used for multi-core devices yet.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Fill the ACK timestamp field in nRF5 driver. This is required by
OpenThread for the proper CSL transmitter functioning.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
OpenThread expects the FCS field at the end of the ACK frame to be
passed with `otPlatRadioTxDone`.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
This commit updates the revision of hal_nordic component
and introduces necessary changes to the IEEE 802.15.4 driver
to match latest nRF IEEE 802.15.4 radio driver API.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
The current rf2xx driver not implement any configuration. Add
the minimal structre to implement rf2xx driver configuration and
implement IEEE802154_CONFIG_PROMISCUOUS mode.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Configure transceiver to create a 0 period backoff and perform only one
time the CCA without transmission retires for failures.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The current RF2XX driver only support IEEE802154_TX_MODE_CSMA_CA. Add
IEEE802154_TX_MODE_DIRECT to allow transmit packets immediately without
performing random backoff, CCA and retransmission process.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This commit implements the OpenThread APIs to pass MAC keys and
frame counter to the radio layer in order to process the
transmission security. This is needed for the correct functioning
of a CSL transmitter.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Add support for delayed transmission of frames for the CSL
Transmitter OpenThread function.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
After changes in commit a42d6c98d3, the
pkt can no longer be a NULL pointer. Remove the unnecessary NULL pointer
check to silence the Coverity.
Coverity ID: 219536
Fixes#32912
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace all existing deprecated API with the recommended alternative.
Be aware that this does not address architectural errors in the use
of the work API.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
