This simplifies DLF and PCP enabling devicetree macros with
DT_ANY_INST_HAS_PROP_STATUS_OKAY() instead of the complicated
ones.
Also, this moves the macro to initialize struct elements into
the struct initializer itself. This makes it clearer on which
element is being initialized directly inside the struct
initializer instead of having to do mental macro trampoline
to find the correct macro.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The table of contents for the samples' catalog was showing too many
levels for some sections.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Enabled intel LPSS DMA interface using dw common to support
usage of internal DMA in LPSS I2C to transfer and
receive data.
Signed-off-by: Bindu S <bindu.s@intel.com>
hal_radio_tx_chain_delay_ns_get() was incorrectly
returning the microsecond value, resulting in a 1us
error in the timing => Fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Align the header a bit with the one for the real radio,
adding missing Tx power levels and removing TODO which did not
need doing.
The old one originated as a copy of the nrf52833 one, and did not
evolve like the real ones.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Remove a few macros which are not used anywhere in the tree.
For the sake of simplifying the header and easing its understanding.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The following changes have been done:
1.
HAL_SW_SWITCH_GROUP_TASK_DISABLE_PPI_REGISTER_TASK(index)
= HAL_SW_SWITCH_GROUP_TASK_DISABLE_PPI_TASK(channel)
has been convered into
HAL_SW_SWITCH_GROUP_TASK_DISABLE_PPI_REGISTER_TASK(index, channel)
2.
HAL_SW_SWITCH_GROUP_TASK_ENABLE_PPI_REGISTER_TASK(index)
= HAL_SW_SWITCH_GROUP_TASK_ENABLE_PPI_TASK
Which was only used in one place, has been replaced with the
equivalent HAL call
3.
HAL_SW_SWITCH_GROUP_TASK_ENABLE_PPI_REGISTER_TASK(index) = 0
was replaced with the HAL subscribe clear function
nrf_dppi_subscribe_clear(NRF_DPPIC,
HAL_SW_DPPI_TASK_EN_FROM_IDX(SW_SWITCH_TIMER_TASK_GROUP(index)));
4.
NRF_DPPIC->SUBSCRIBE_CHG[group].EN/DIS = 0;
have been replaced with the equivalent HAL clear call
5.
NRF_DPPIC->TASKS_CHG[group].DIS = 1;
have been replaced with the equivalent hal task_trigger() call
6.
Manually setting the CHG registers, has been replaced with a
clear + add (because the hal does not have a set function yet)
So,
NRF_DPPIC->CHG[group] = value
has been replaced with
nrf_dppi_group_clear(NRF_DPPIC, group);
nrf_dppi_channels_include_in_group(NRF_DPPIC, value, group);
(A set function has been requested from the HAL team)
Note: There is other direct registes writes to the dppi subscribe and CHG
registers in the coded phy parts which have not been changed yet.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This requirement was implicit as the only backend the host is currently
tested with behaves this way.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Reduce the unnecessary hidding and indirection,
as it makes the scripts more difficult to follow
for no benefit.
If somebody wants to debug these tests, they'll want
to see the sim_id, and won't benefit from going around
opening files needlessly.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
arch_switch() is basically an alias to xtensa_switch() so
we can mark arch_switch() as ALWAYS_INLINE to avoid another
function call, especially when no optimization is used when
debugging.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Introduce support for Texas Instruments TMAG5170
high-precision linear 3D Hall-effect SPI sensor.
This driver allows to configure measurements on
magnetic and temperature channels. It is also
possible to read rotation of the magnet.
Signed-off-by: Michal Morsisko <morsisko@gmail.com>
Add two new functions: crc4 for generic calculations
of CRC4, and crc4_ti which use look-up table for
faster calculations of CRC4 algortihms that base
on 0x03 polynomial.
Signed-off-by: Michal Morsisko <morsisko@gmail.com>
After having migrated a bunch of apps to the new default C library we
have realized that some of the caveats described in the existing
picolibc section of the migration guide do require action on the user
more often than previously thought. In order to ensure that all users
see those and can act upon them, move the picolibc migration info to the
required changes section.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Added usage of dma_parent phandle instead of using parent-child
method to get DMA base address.
Signed-off-by: Anisetti Avinash Krishna <anisetti.avinash.krishna@intel.com>
Added a phandle named dma-parent to get base address instead of
adding DMA as child node because it is causing a build warning
(avoid_unnecessary_addr_size) if the parent instance has
"#address-cells/#size-cells" dts properties marked required
and child doesn't have reg property. DMA doesn't have reg
as it gets the base address from parent device
Signed-off-by: Anisetti Avinash Krishna <anisetti.avinash.krishna@intel.com>
When multithreading is disabled, the whole mutex infrastructure isn't
available. The common malloc code wasn't checking for this case which
caused build failures.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Detlev Zundel dzu@member.fsf.org
Adds initial support for hm330x dust sensor series. Allows to read PM1,
PM2.5 and PM10 concentrations in atmospheric environment. A further
update to the driver may add support for also reading "standard" CF1
concentrations by exposing of a custom sensor attribute or a Kconfig
option. Tested with Grove - Laser PM2.5 Sensor (HM3301) attached to a
Wio Terminal.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fix the print format string so the "%" is printed
instead of a bogus value.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Some AT commands, are longer than 255 chars.
Also, script_send_request_pos is uint16_t, so with this change,
request_size will have the same type.
Signed-off-by: Wojciech Slenska <wsl@trackunit.com>
Fix regression in sw switch single timer id use for nRF53x
series SoC.
Regression introduced in commit cfcbe5d68e ("Bluetooth:
Controller: Remove redudant header file includes").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Excluded cy8cproto_062_4343w and cy8cproto_063_ble from
samples/userspace/shared_mem sample due to a hardware
limitation with number of available MPU regions.
Sample throws warning:
`num_parts of 4 exceeds maximum allowable partitions (2)`
With the Cortex M4 on the boards only 2 mpu regions are left
and available to be used with the sample.
Signed-off-by: Pavlo Havrylyuk <pavlo.havrylyuk@infineon.com>
The C standard specifies 'hh' as a length modifier indicating an integer
conversion specifier applies to a signed char or unsigned char
argument. Python doesn't do that, so replace relevant %hh with %h.
Also fix the handling of %ll so that it applies to all integer specifiers
as well.
Signed-off-by: Keith Packard <keithp@keithp.com>
Prior to this patch, the BRD4170A did not enable the UART console
using pinctrl, which was recently added for this SoC series.
Signed-off-by: Warren Buffer <warren.buffer78@gmail.com>
This commit enables MSPI instance for apollo4p_blue_kxr_evb board.
Also adds pin configuration for each instance.
Signed-off-by: Aaron Ye <aye@ambiq.com>
This commit enables SPI instance for apollo4p_blue_kxr_evb board.
Also adds pin configuration for each instance.
Signed-off-by: Aaron Ye <aye@ambiq.com>
This commit enables I2C instance for apollo4p_blue_kxr_evb board.
Also adds pin configuration for each instance.
IOM4 is used for Bluetooth HCI-SPI inside of chip.
So no i2c4_default is defined.
Signed-off-by: Aaron Ye <aye@ambiq.com>
