According to section 4.2.2.4, Compositiion Data page 128 shall be
present if the node supports Remote Provisioning Server (section
4.2.2.4).
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
According to sections 7.2.2.2.4 and 7.2.2.2.5 of MshPRTd1.1v20,
when starting Private Node Identity or Private Network Identity, the
node shall use either RPA or NRPA and the advertising address. The
address shall be regenerated when Random field is regenerated.
Use BT_LE_ADV_OPT_USE_NRPA options to make advertiser generate and use
NRPA on every start of advertising Private Node Identity or Private
Network Identity.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Currently zephyr_code_relocate() will exit with an error if the
library does not exist. This commit adds a macro that only calls
zephyr_code_relocate() when a specific Kconfig symbol is enabled.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
This removes the scanning and PA sync capabilities from the
broadcast sink implementation, moving the responsibility of this
to the application layer.
The reason for this is to add more flexibility and choice to the
upper layers, while simplifying the Broadcast Sink implementation.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The broadcast sink API has been modified so that all scanning, etc.
will be done by the application, rather than the stack. This commit
updates the sample to use this updated API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The broadcast sink API has been modified so that all scanning, etc.
will be done by the application, rather than the stack. This commit
updates the sample to use this updated API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The broadcast sink API has been modified so that all scanning, etc.
will be done by the application, rather than the stack. This commit
updates the tests to use this updated API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The broadcast sink scan API is no longer used by the BAP
shell, which handles everything related to PA sync and scan
itself now.
It has also been made easier to sync to a broadcast
source by simply using create_broadcast_sink.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The number of subgroups the scan delegator supports should
match the number of subgroups the broadcast sink supports.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add support for selecting a periodic advertising
sync object for use. This will also be available outside
the scope of bt.c via the extern declaration.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This will effectively test both the BAP and CAP TX sync functions
as well as the CAP send function.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify audio_send_timeout to use bt_bap_stream_get_tx_sync
instead of bt_iso_chan_get_tx_sync to avoid using an internal
function to get the ISO channel from the BAP stream.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The @note in bt_bap_stream_send did not make any sense, and has
been replaced with a new note.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Configure ENET_REF_CLK direction as input when
CONFIG_ETH_MCUX_RMII_EXT_CLK is set to allow Ethernet external clock
usage.
Signed-off-by: Benjamin Lemouzy <blemouzy@centralp.fr>
This is following the same convention that was recently introduced to Alder
Lake boards (intel_adl). Additionally, an "S" suffix is added to the
boards, since what's currently supported is in fact the Raptor Lake S
variant.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
A sneaky whitespace was causing inconsistent rendering in the list of
available overlays.
Fixed by switching to a list table which is arguably now even easier to
read.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add a config entry specifically for RISC-V runtime.
Memory usage is 7066 bytes.
Also adjust some library options. This make the ARC runtime binary
smaller as well:
before:
FLASH: 8808 B
SRAM: 3672 B
after:
FLASH: 5596 B
SRAM: 3672 B
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Update ARC support status page as now we have scalar ARC VPX
port upstreamed.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Make make UART IRQ line number configurable in nSIM
nsim-uart-ns16550.dtsi DTS helper.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Added some missing doxygen comments (missing javadoc style syntax)
Fixed some brief descriptions
Added named heading in conn_mgr_conn_binding
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Currently, this script will blow up when given a symlink for a path (e.g.,
to a kconfig file).
This is annoying, as when wrapping the build system in a hermetic build
system like Bazel, Bazel likes to limit the input file set by creating
symlinks.
Resolve the path, if it is a file once resolved, then it's OK.
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
The original issue is fixed some time ago, so re-enable the
test.
This reverts commit 52992b0658
("tests: skip the cpu_idle test for nsim_hs_smp")
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
In case of HDA Link DMA FIFORDY bit is RO according
to HW specification thus should be managed by HDA controller.
Add a logic to set FIFORDY for HDA Host DMA only
Signed-off-by: Ievgen Ganakov <ievgen.ganakov@intel.com>
Fixes a race condition that could occur if the TX queue was read out
before iso_has_ts was set. In that case, the provided buffer is of
wrong length.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Allow properties 'regulator-min-microvolt' and 'regulator-max-microvolt'
for fixed regulators: Note: they should be equal.
Add simple functions for getting list of allowed and count of voltages.
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
Possible situation is that in some driver, devices can be controlled in
different ways: in some, we can only turn the power on or off, in others,
we can only control the voltage, and in some, we can control power supply
or voltage level. There may also be devices where there is no control
over power supply at all. A clear example of this can be eMMC devices
where the voltage is usually fixed and they are always powered on.
However, we would like to have a common code for controlling all the
mentioned types of devices, at least the driver shouldn't worry about the
implementation details of voltage regulators. Therefore, there may exist
empty regulators - regulators that only contain information about the
supported voltage, and we cannot change anything in them. The device tree
node description for such a regulator is only necessary for compatibility
with other regulators. Hence, we need to add the possibility of the
existence of such a dummy fixed-regulator.
In this commit, support for a fixed dummy regulator without the ability
for any control has been added. Note that such support also exists in the
Linux kernel. In other words, the logic of the fixed regulator has been
aligned with the logic of the fixed regulator inside the Linux kernel.
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
Added the VERSION file to the list of application files.
Added link to the application version management page.
Signed-off-by: Grzegorz Ferenc <Grzegorz.Ferenc@nordicsemi.no>
This commit removes the direct calls of the PPP API of the
network device used by gsm_ppp.c
These calls are now performed by the L2 PPP interface when it
is brought up or down using net_if_up() or net_if_down()
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Make sure the underlying allocation system can support an allocation
request generated by the new operator which has stricter alignment
requirements than the default. For G++, this ends up using the 'memalign'
function which is not part of any C standard.
Signed-off-by: Keith Packard <keithp@keithp.com>
Memalign is another name for the posix aligned_alloc function, although it
has weaker restrictions on the relationship between the alignment and size.
memalign() is used internally by the libstdc++ when built for 'newlib'
targets (which includes picolibc) instead of aligned_alloc() due to a bug
in gcc, so we need to provide an implementation of this when using that
library, even though it's not part of the Zephyr C library API.
When a fix for the libstdc++ is merged upstream and can be consider a
reasonable dependency for Zephyr, this work-around can be removed.
Closes: #57899
Signed-off-by: Keith Packard <keithp@keithp.com>
Some architectures such as RISC-v support more than 255 interrupts
per aggrigator. This diff adds the ability to forgo the aggrigator
pattern and use a configurable number of bits for multilevel
interruts.
Signed-off-by: Joshua Lilly <jgl@meta.com>
Although there are no in-tree users, we will deprecate the
`facebook` vendor prefix and add `meta`.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
This fixes return error from notify_cb function that was never set up.
As the result, the functions like bt_gatt_notify_cb and bt_gatt_indicate
returned invalid error when failed to send notification.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Reuse available efi_boot.rst from common in the board documentation.
Move specific parts to notes below.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
