Add Low Power States support to the power shim layer
and show the usage in the quark_se sample.
States are defined as follow:
- SYS_POWER_STATE_CPU_LPS: SS2 with LPSS enabled
- SYS_POWER_STATE_CPU_LPS_1: SS2 with LPSS disabled
- SYS_POWER_STATE_CPU_LPS_2: SS1 with LPSS disabled
Jira: ZEP-994
Change-Id: Ie4b93f6e539cb53fc035be00280b66b2cb0d9fea
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Leave the aon counter in running state after the test.
Arduino 101 loader assumes the counter is running.
Stopping the counter will cause the next app to
not start without a hard reset or power cycle.
Jira: ZEP-961
Change-Id: Ia88f0c642b1df8dc5e2b1ee6c55ff0618b6127d0
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Debug setting is using another mdef file that was no changed by
commit 5b1b2d6123
Change-Id: I406b45e37a112352c88629cf7d494c70784930aa
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Otherwise, local settings in the account will cause headache and
randomly alter the result of the testcase.
Change-Id: I758966a7fe9335a13ce237aea7d6df2ddc5733ce
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Reorganize the code tree so no forward declarations are needed
(basically, move main() to the bottom).
Retag as not build only so it can be run on Quark*
Convert to actually verify counter readouts are increasing /
decreasing over busy empty loops and the alarm is being called.
Change-Id: I746efe595b8d1ac4471dccc2e87f8b36f5cc8ebe
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
sanitycheck already sets this and we need to allow deprecation
warnings.
Change-Id: I3d6bf652403bcbdba47663c8cd0d17682a8a842d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add an Arduino 101-specific configuration that enables flash-based
storage support as well as the file system shell.
Change-Id: Ic10ea958dd2446df4942a8dfd3cce1e3368852b2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Implement a new "clear" command to exercise the bt_storage API. The
command can either take an address parameter to clear storage for a
specific device, or, if called with the parameter "all", to clear the
entire storage.
Jira: ZEP-181
Change-Id: I1ebd17033f2062951abeeb7d7c448a34a3672577
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch removes "FAT" from files names, config names and
symbol names so as to avoid confusion, when other modules use
them in a more generic way.
Also flash_disk_access.c and ram_disk_access.c now exports generic
disk_access symbols as defined in include/disk_access.h rather
than FAT specific ones in fs/fat_diskio.h. Thus modules like
USB which need to use disk_access interface is not dependent
on symbols from ELMChan FAT module. Also fat_diskio.h
is removed.
Further the shim between ELM chan and Zephyr is modified as
per these changes.
Change-Id: Ifd80f14a629e467ee9c7a9aaff8a4896eed11982
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
This TC cover dma transfer with different channel and burst length
It support 2 ways to execute
*) full-auto: by default, it run all sub test cases defined in array
once flashing done and reset.
*) interactive: when CONFIG_CONFIG_CONSOLE_HANDLER_SHELL=y, it go into
shell first, user can input test command one by one for debugging.
move original test under drivers/dma to test_loop_transfer/
Change-Id: I7e78b730592c80bf2c23b20c8b0eb65a9b353acd
Signed-off-by: jing wang <jing.j.wang@intel.com>
The main task uses stack-hungry() printf(), and the switch to the unified
kernel pushed the necessary space over the edge.
Change-Id: I7b64e7f09d91c5050ffe7fb18506ff24289169fc
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
For systems that have both high base (CPU, bus, etc.) frequency and
small divider of the base frequency for system clock and this way,
do not allow 1 second period for the system clock, set the system
clock period to 0.1.
Change-Id: Iafb4604112d4adb8430f8bf57a5a31de3f6cf91d
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Since the mutex can not be unlocked if it is not locked, fix the test
and make sure that it unlocks the timer exactly same times as it locked
it before.
Change-Id: Ie29d308b789ed00f4fd3cf2faef3aa1f4bc89e3e
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
The SPI_0_CS_GPIO and SPI_0_CS_GPIO_PIN values were defaulting to
something not very usable, because of which e.g. the file system
test app was having to explicitly set the right values in its sample
configuration. Having a proper defaults in the board defconfig means
this isn't needed anymore.
Change-Id: I1399914451c1616588322e25304d40d3dd1151e7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Test was not completing on CONFIG_DEBUG=y setting, current filter
sets custom stack size for such setting
Jira: ZEP-1203
Change-Id: I3a6ada88bc2e8a1fee757773c4b19b72551926a7
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
We the unified kernel now sizes have gone up and we have some more
testcases that are RAM limited on small memory systems.
Change-Id: I4716a779fac86a420607ba716edd012976d14254
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Commit 4187822d08 removed some filters
at sanitycheck script that were previously preventing foot print test
to run on board quark_d2000_crb.
Added filter excludes such board from min and reg footprint tests.
Change-Id: I2a32e34b1af6d16b3da418cd3113c52b2369eb97
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Making a reference to the common work queue code should not necessarily
drag in the system workqueue, since it is possible to use a workqueue
that is not the system workqueue. This is done by moving the system
workqueue into its own code module.
Moving the system workqueue to its own code module allows removing the
NANO_WORKQUEUE and SYSTEM_WORKQUEUE kconfig options, and compiling the
common workqueue code and system workqueue all the time. They are only
linked in the final image if a reference to them exist, same as the
other kernel modules.
Change-Id: I6f48d2542bda24f4702e7c2e317818dd082b3c11
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This increases number of available L2CAP channels for the test purposes.
This is needed for TC_COS_CFC_BV_05_C test case.
Change-Id: I5df099fb64632e1a0e557852ca55ee45a9cc89ed
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This fixes configuration file name in testcase.ini file.
Change-Id: I6496f98694415bfc3a76308aa9ee6dfd008e1691
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This updates README as well as makefile to choose Zephyr BLE firmware
configuration as a default one.
Closes: ZEP-1187
Change-Id: I78dec2a4e2b5bfe634a8b7b8897d4f6ab6b37b44
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds sample configuration file for tester application that
supports controllers with Zephyr-based BLE firmware.
Change-Id: I8b63f93d1395837b8485aba7060b6626be1daab1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The README files provided with the samples contain references to NBLE,
which is not a publicly supported solution for Bluetooth. Simply
remove these files. If the need arises to provide application-specific
information in the future we can add back per-application README
files.
Jira: ZEP-1183
Change-Id: I81b3ea5491d50fb16062ccd5a421ddc8fcb7ea42
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove those from Makefiles and testcase.ini, we now support unified kernel
only and sanitycheck script now knows how to deal with this.
Change-Id: I853ebcadfa7b56a4de5737d95f2ba096babb2e13
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Test tests/kernel/test_xip does not fit FLASH region of new platform
cc3200_launchxl that was added by commit 10ea5d0, hence it must be
excluded from such test so daily sanitycheck script completes
successfully.
Jira: ZEP-1201
Change-Id: I01ec2b9af45e34934d91922bd749a83f305746b1
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
The test relies on the workq thread being in the system. It is possible
for the workq to not be in the system even if CONFIG_SYSTEM_WORKQUEUE is
enabled, if nothing makes references to the symbols in the object file,
so we cannot rely on the kconfig option to know if the system workq
thread is in the system or not. So, force it in.
Change-Id: I1ae2613fbd32928b673fc4c74a9dc56502255763
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Port the power management test app to use unified kernel.
Change-Id: I2f10748be5ca7d9792f6e97c35f5f2aabab769e7
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
QMSI 1.3 natively supports restoring the SoC and peripherals
after sleep.
The Zephyr Power Management shim layer is updated
in order to support QMSI functions.
The following functions have been added:
void _sys_soc_set_power_state(enum power_state);
void _sys_soc_power_state_post_ops(void);
In order to fully support deep sleep, the function
_sys_soc_set_power_state now support saving and
restoring CPU context and returns to the application.
_sys_soc_set_power_state function also abstracts
QMSI cpu states and enable the application to choose
between C1/C2 or C2LP states.
The QMSI power states are mapped as follows:
SYS_SOC_POWER_STATE_CPU_LPS -> power_cpu_c2lp
SYS_SOC_POWER_STATE_CPU_LPS_1 -> power_cpu_c2
SYS_SOC_POWER_STATE_CPU_LPS_2 -> power_cpu_c1
SYS_SOC_POWER_STATE_DEEP_SLEEP -> power_soc_deep_sleep
SYS_SOC_POWER_STATE_DEEP_SLEEP_1 -> power_soc_sleep
The following functions have been removed:
void _sys_soc_set_power_policy(uint32_t pm_policy);
int _sys_soc_get_power_policy(void);
FUNC_NORETURN void _sys_soc_put_deep_sleep(void);
void _sys_soc_put_low_power_state(void);
void _sys_soc_deep_sleep_post_ops(void);
Those changes are propagated to the samples.
All calls to QMSI are removed.
Jira: ZEP-1045, ZEP-993, ZEP-1047
Change-Id: I26822727985b63be0a310cc3590a3e71b8e72c8c
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
These testcases can't build on common platforms with 16K or less of
memory.
Change-Id: Iade2aa423f42a1f174a5ebb5d183b362917f503e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Not all platforms enable CONFIG_PRINTK so lets only test if its enabled
Change-Id: I0fc83e21b4be1ff0e8fef94e66793a0b725a3db2
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
QD2000, for example, can't run this.
Change-Id: I86c7ca22e4724844ffc5e64329063baf762470c9
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This test is checking for the wrong results and testing for broken/missing
feature that is actually working.
Jira: ZEP-1124
Change-Id: I7b5f87ac7b47e33e7bbcd4d3967b289f6631cb37
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Microkernel and nanokernel versions of the test now use distinct
sets of source files. This eliminates the dependency on the
MICROKERNEL and NANOKERNEL configuration options, which the
unified kernel doesn't set correctly in all cases.
Change-Id: I59e1d4a73265a433f526d030d2fd04d4b8de1973
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
