Convert cc2529 driver to `spi_dt_spec` and `gpio_dt_spec`. Required a
whole driver conversion from passing around the driver data struct to
passing around the driver itself.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Convert cc1200 driver to `spi_dt_spec` and `gpio_dt_spec`. Required a
whole driver conversion from passing around the driver data struct to
passing around the driver itself.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
When ack data for extended address is set with the
nrf_802154_ack_data_set function, the extended address
must be reversed to the IEEE 802.15.4 address transmit
order in order to be properly matched.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit aligns the nRF5 ieee802154 driver with the latest
API changes necessary to handle security-related flags properly.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
When stopping the interface, also abort the RX routine and enable RF
power saving. Will re-start RX on iface start.
Also fixed a bug with `cmd_fs` crashing at RF wakeup because `rf_mode`
was allocated on stack.
Signed-off-by: Stancu Florin <niflostancu@gmail.com>
When frame counter is managed by the radio driver the upper layer
needs to be informed about the frame counter changed. The upper layer
looks for the most recent frame counter in the transmitted frame,
this is why the tx_payload need to be updated after processed by
the radio driver.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
This commit extends the capabilities of the nRF IEEE 802.15.4 radio
driver with IEEE802154_HW_TX_SEC capability.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Copy back the TX buffer content back into the upper layer
in case of a TX failure.
This is necessary in when frame encryption by the radio driver
is used. The shim layer for the nRF5 driver has a buffer, that
is used by the driver to authenticate and encrypt the frame
in-place. In case of a TX failure, the buffer contents
are propagated back to the upper layer. The upper layer
must use the same secured frame for retransmission.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Use the nrf_802154_retransmit_csma_ca_raw and
nrf_802154_retransmit_at_raw API to retry the frame transmission
after a failed attempt.
The retry must be performed only in response to
a nrf_802154_transmit_failed event.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Function 'nrf_802154_transmitted_timestamp_raw' is not serialized and
connot be used for multi-core devices yet.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Fill the ACK timestamp field in nRF5 driver. This is required by
OpenThread for the proper CSL transmitter functioning.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
OpenThread expects the FCS field at the end of the ACK frame to be
passed with `otPlatRadioTxDone`.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
This commit updates the revision of hal_nordic component
and introduces necessary changes to the IEEE 802.15.4 driver
to match latest nRF IEEE 802.15.4 radio driver API.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
The current rf2xx driver not implement any configuration. Add
the minimal structre to implement rf2xx driver configuration and
implement IEEE802154_CONFIG_PROMISCUOUS mode.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Configure transceiver to create a 0 period backoff and perform only one
time the CCA without transmission retires for failures.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The current RF2XX driver only support IEEE802154_TX_MODE_CSMA_CA. Add
IEEE802154_TX_MODE_DIRECT to allow transmit packets immediately without
performing random backoff, CCA and retransmission process.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This commit implements the OpenThread APIs to pass MAC keys and
frame counter to the radio layer in order to process the
transmission security. This is needed for the correct functioning
of a CSL transmitter.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Add support for delayed transmission of frames for the CSL
Transmitter OpenThread function.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
After changes in commit a42d6c98d3, the
pkt can no longer be a NULL pointer. Remove the unnecessary NULL pointer
check to silence the Coverity.
Coverity ID: 219536
Fixes#32912
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace all existing deprecated API with the recommended alternative.
Be aware that this does not address architectural errors in the use
of the work API.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Currently there is no way to distinguish between a caller
explicitly asking for a semaphore with a limit that
happens to be `UINT_MAX` and a semaphore that just
has a limit "as large as possible".
Add `K_SEM_MAX_LIMIT`, currently defined to `UINT_MAX`, and akin
to `K_FOREVER` versus just passing some very large wait time.
In addition, the `k_sem_*` APIs were type-confused, where
the internal data structure was `uint32_t`, but the APIs took
and returned `unsigned int`. This changes the underlying data
structure to also use `unsigned int`, as changing the APIs
would be a (potentially) breaking change.
These changes are backwards-compatible, but it is strongly suggested
to take a quick scan for `k_sem_init` and `K_SEM_DEFINE` calls with
`UINT_MAX` (or `UINT32_MAX`) and replace them with `K_SEM_MAX_LIMIT`
where appropriate.
Signed-off-by: James Harris <james.harris@intel.com>
The shim layer could in some circumstances not be properly
configured which would result in an unbound radio interrupt
handler.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
The driver was reworked recently so that driver capabilites are
obtained at runtime. The function to obtain the capabilities was
called after L2 initialization though, which is invalid as L2
initialization code already depends on certain driver capabilites.
Move the capability initializer to an earliest possible stage
(i. e. just after the core driver is initialized) to fix the issue.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This is a follow-up to commit 9f56cc5531.
Add net/ in the inclusion of ieee802154_radio.h so that the file can
be successfully included.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit introduces runtime query of the HW Capabilities of
the nRF IEEE 802.15.4 Radio Driver.
Signed-off-by: Czeslaw Makarski <Czeslaw.Makarski@nordicsemi.no>
Currently, if no net_pkt's are available, the radio driver RX thread
drops the 802.15.4 frame silently. This causes undesired behaviour,
where we can drop the packet which has already been acknowledged at
the 802.15.4 level.
Fix this, by blocking the RX thread if no net_pkt is avaliable. The
packets received while the RX thread is blocked will be accumulated in
the underlying nRF 802.15.4 driver, and eventually when it runs out of
internal buffers before the thread is unblocked, it'll stop
acknowledging the incoming frames.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The driver allocated packet from the TX pool on its RX path. Fix this
by using a correct allocator function.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Convert drivers to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add support for transmission modes that send a packet
at a specific time in the future.
Remove TXTIME, TXTIME_CCA, CSMA_CA capabilities and their calls when
they are not supported by selected drivers. Add TXTIME flag in
get_capabilites function.
Signed-off-by: Maciej Fabia <maciej.fabia@nordicsemi.no>
Signed-off-by: Pawel Kwiek <pawel.kwiek@nordicsemi.no>
This change adds IEEE802154_RAW_MODE support for the
cc1352r.
This allows using the cc1352r 2.4 GHz radio and Sub Ghz
radio as a transceiver (PHY) instead of using L2 networking.
Signed-off-by: Erik Larson <erik@statropy.com>
