The samples had a _iso suffix, but the other ISO samples
prefix iso_.
Renames the central and peripheral sample so that they
prefix iso_ rather than suffix _iso.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Due to it is a normal firmware downloading sequence,
it should be a debug log instead of error log.
Change LOG_ERR to LOG_DBG for this case.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
The way ESP32 XIP works (with MMU and cache) does no fit the way Zephyr XIP
is implemented, causing issues related to included Zephyr linker files.
Flash code still resides in flash for execution, but MMU/Cache handles it
in such way that XIP might not (or should not) be used with current Zephyr
approach. To address this problem, XIP configuration option is being
removed from Espressif targets.
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
Several BSIM tests did not enable -RealEncryption=1.
Since everything in LE Audio effectively requires encryption,
we should enable it, as we have seen a few tests passing before
that shouldn't, because they didn't set -RealEncryption=1.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
With commit ad242b9, the buffer size was made configurable. Hence, the
corresponding definition CONFIG_SAMPLE_BUFFER_SIZE has to be used when
filling and displaying the buffer.
Signed-off-by: Joerg Hofrichter <joerg.hofrichter@ni.com>
Enable central HR peripheral HR samples for nrf54l15bsim.
RealEncryption is BabbleSIM is not enabled as nRF54L port
in Zephyr Controller is not yet supported and the test is
also not using security (SMP pairing).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use SW_SWITCH_SINGLE_TIMER for nRF54Lx so that fast ramp
can be used, and hence support assymmetric PHYs in ACL
connections.
nRF54Lx radio domain does not have second timer instance
to efficiently implement software switch unless a second
time is used from a different power domain needed use of
PPIB for the double buffered switch timer compares.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use NRF_GRTC, Global real-time counter, instead of NRF_RTC.
NRF_GRTC is present in a different power domain in the SoC.
Also, NRF_GRTC provide microsecond resolution timing units,
in the future use of NRF_TIMER for packet timer can also be
replaced.
Use of NRF_RTC would keep Radio power domain ON in addition
to already ON NRF_GRTC's power domain, hence switch to using
NRF_GRTC on nRF54Lx SoC to have lower power consumptions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
nRF54Lx have updated Data Whitening register settings, add
implementation to correctly set them up.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor sw_switch hal interface use and document why some
PPI/DPPI channel group related subscriptions are not
disabled explicitly.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix software tIFS switching using single timer from
triggering spurious TXEN/RXEN if the first remainder is
shorter than the tIFS delay calculated in the sw_switch()
function.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
New file with ADC configuration for UCANS32K1SIC evb.
Add ucans32k1sic_s32k146 to platform_allow.
Signed-off-by: Marcin Wierzbicki <marcin.wierzbicki@accenture.com>
Extend the adc_mcux_adc12 adc api to set the ref_internal to
a value of vref-mv property.
Signed-off-by: Marcin Wierzbicki <marcin.wierzbicki@accenture.com>
Add the vref reference voltage in the DTS, so that the adc driver
can retrieve the value for conversion.
Signed-off-by: Marcin Wierzbicki <marcin.wierzbicki@accenture.com>
Enable support for channels >= 16 on devices S32K146 and S32K148.
Channels >= 16 are encoded as 100000b..101111b in SC1[ADCH] field.
Signed-off-by: Marcin Wierzbicki <marcin.wierzbicki@accenture.com>
Update Ambiq adc driver to add apollo4
fixed typ of BUMBER to NUMBER
Move buffer size prio to configuring slots
and enabling the ADC
removed #if defined(CONFIG_PM_DEVICE_RUNTIME)
Signed-off-by: Richard Wheatley <richard.wheatley@ambiq.com>
Get data for various roots from modules and do not hardcode location
when retrieving list of boards in testplan.
Fixes#71761
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
