Add clock control support for RZ/A2M
Signed-off-by: Hoang Nguyen <hoang.nguyen.jx@bp.renesas.com>
Signed-off-by: Binh Nguyen <binh.nguyen.xw@renesas.com>
A typo in the top-level CMakeLists.txt prevented C++ targets from
receiving -fstack-protector-explicit when CONFIG_STACK_CANARIES_EXPLICIT=y.
Signed-off-by: Mirai SHINJO <oss@mshinjo.com>
On reboot, client list to notify is not updated properly.
Fix is to check and add the reconnected clients on
security changed cb.
Subscription check is added before notify to clients.
BT Enable check is added in the register function before adding
bonded devices to client list.
Also typo is corrected in add_bonded_addr_to_client_list in the
second loop.
Signed-off-by: Nithin Ramesh Myliattil <niym@demant.com>
Since siwx917_rb4338a now declare a storage_partition,
siwx917_rb4338a.overlay is not required anymore.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Some tests (eg. tests/bluetooth/shell) expects to have a
storage_partition defined.
storage_partition is also defined in the DT of most of the boards.
For now, this patch define a very small storage partition to avoid any
conflict with code_partition.
Tested-by: Andras Nyiri <andras.nyiri@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Update bit array (number of connections) added for each receive state.
Notifications are attempted to be sent in the system workqueue and
retried if failing.
Issue #85487
Signed-off-by: Jens Rehhoff Thomsen <jthm@demant.com>
Add section describing how to write RTC device drivers. This should
help ensure consistent RTC behavior across system reboots.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Move down the "History of RTCs in Zephyr" which is least relevant,
especially now that the RTC API is well established.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Adds support for setting up a firmware loader image in a build,
which can also optionally automatically configure MCUboot and the
application image to be able to boot the firmware loader image
using the retention subsystem
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Removes setting the boot mode device in the default test overlay
file as this is now set by the board
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Use -w option to delay the startup of the upload job.
Then when ready, do "zperf jobs start" to launch all upload
sessions at the same time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If user has enabled CONFIG_ZPERF_SESSION_PER_THREAD, then if
user gives -a (async) option to upload command, then multiple
uploads can be run simultaneously. Each upload will be run
in a dedicated work queue. The work queue thread priority can
be set by -t option.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Added jlink runner support for A-core platform on i.MX93 EVK board,
so that can use "west flash" to download zephyr.bin to DDR memory
and then boot the Zephyr on Cortex-A55 Core0.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
The symbol SRAM_VECTOR_TABLE is not used in the adi/max32 soc. Removed
it in order to clean up the Kconfig file and avoid confusion with the
upcoming new definition of SRAM_VECTOR_TABLE symbol. (PR #87468)
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
Use cache API for disabling and enabling ICACHE. The driver handles waiting
for ongoing cache invalidation.
Signed-off-by: Henrik Lindblom <henrik.lindblom@vaisala.com>
Use the Zephyr cache API in soc initialization code instead of calling the
HAL directly. The change does not modify the pre-existing cache settings,
just changes the path they are enabled.
Signed-off-by: Henrik Lindblom <henrik.lindblom@vaisala.com>
STM32 Cortex-M33, such as the L5/H5/U5 series, have a cache peripheral for
instruction and data caches, which are not present in the C-M33
architecture spec.
The driver defaults to direct mapped cache as it uses less power than the
alternative set associative mapping [1]. This has also been the default in
stm32 soc initialization code for chips that have the ICACHE peripheral,
which makes it the safest choice for backward compatibility. The exception
to the rule is STM32L5, which has the n-way cache mode selected in SOC
code.
[1]: https://en.wikipedia.org/wiki/Cache_placement_policies
Signed-off-by: Henrik Lindblom <henrik.lindblom@vaisala.com>
This change refactors the mdio_read / mdio_write functions into an
mdio_wransfer, and utilizes it to implement
mdio_{read,write,read_c45,write_c45}.
Heavily inspired by the implementation in drivers/mdio/mdio_sam.c
Signed-off-by: John Barbero Unenge <git@lsrkttn.com>
The TXFTLR register has 2 major fields which are TFT for triggering
interrupt threshold and TXFTLR for starting transfer threshold. This is
to ensure that sufficient data is ready for starting transfer.
Signed-off-by: Younghyun Park <younghyunpark@google.com>
Add a basic test for vector table relocation to SRAM. This test
verifies that the vector table can be relocated to SRAM and that
the VTOR register correctly points to the SRAM address range.
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
Allow to place the vector table section in SRAM with
CONFIG_SRAM_VECTOR_TABLE option for all cortex-m architecture that
have VTOR register.
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
Move SRAM_VECTOR_TABLE symbol from general Kconfig to Arch Kconfig
because it depends on the architecture possibility to relocate the
vector table.
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
Move initialization of 'enabled' variable together with declaration.
This fixes the following compiler error:
error: 'enabled' may be used uninitialized [-Werror=maybe-uninitialized]
This is not really an error but the compiler is tricked by the
K_SPINLOCK() macro.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/88996
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Shift the error handling for `ethernet_ll_prepare_on_ipv4` out into
`ethernet_send`, since that is the function that needs to handle the
various result types of the ARP process.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Make it clearer that the `net_buf_ref` is for `k_queue_unique_append`,
and reverse the reference if the queue add fails.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Test the case where the packet provided to `net_arp_prepare` is queued
for later transmission, instead of being replaced with an ARP query
or having ARP information populated.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Update `net_arp_prepare` to return a return code instead of a pointer,
so that the various results of the function can be differentiated.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Print a warning if sending a packet on the L2 interface fails. Currently
this is completely silent unless `NET_DBG` is enabled and the `context`
parameter is provided.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Use the tp_diff() macro as a means of converting an absolute timeout
with respect to a specific clock to a relative timeout, in ms.
Clamp the result between 0 and UINT32_MAX.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Move somewhat useful (but private and internal functions) that deal
with struct timespec to posix_clock.h until there is a better API
available for dealing with operations on struct timespec.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Always require the clockid_t argument to timespec_to_timeoutms() and
remove the unused variant that accepts no clockid_t parameter.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Use CLOCK_REALTIME for the default clock source throughout
the POSIX implementation and tests so that we are
consistent with the specification.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add a common private function timespec_is_valid() that
can be used to check if a timespec object is valid, and
use that consistently in lib/posix/options.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
