This driver only supports a single instance. This commit cleans up the
device definition and indicates this.
Signed-off-by: Brett Witherspoon <brett@witherspoon.engineering>
Assert the source clock is defined in the device tree to ensure the
reference is valid.
Signed-off-by: Brett Witherspoon <brett@witherspoon.engineering>
The DT_INST_CLOCKS_CELL macro takes as the first argument the device
instance and not the cell index. This change correctly gets the second
index of the first device as intended.
Signed-off-by: Brett Witherspoon <brett@witherspoon.engineering>
STM32F2 and STM32L1 Cat. 1 only provide the coarse calibration feature
which is not supported by the code yet.
Signed-off-by: Johan Lafon <johan.lafon@syslinbit.com>
This replaces the verbose LL_RTC_CONVERT_BCD2BIN and LL_RTC_CONVERT_BIN2BCD
by the bcd2bin and bin2bcd Zephyr provided equivalent
Signed-off-by: Johan Lafon <johan.lafon@syslinbit.com>
This adds mutex a lock in rtc_stm32_set_time and rtc_stm32_get_time to
ensure consistent data reading. Also performs register reading in a single
operation in rtc_stm32_get_calibration for the same reason.
Signed-off-by: Johan Lafon <johan.lafon@syslinbit.com>
LL_RTC_Init() internally uses LL_RTC_EnterInitMode() wich uses a blocking
while loop. This rewrite uses the less CPU time wasteful local
rtc_stm32_enter_initialization_mode() instead. As a side effect
LL_RTC_InitTypeDef in rtc_stm32_config is not needed anymore.
Signed-off-by: Johan Lafon <johan.lafon@syslinbit.com>
Calling LL_RTC_Init causes the RTC to stop while being configured thus
inducing time drift. This commit avoids doing it at each reset if the RTC
is already properly configured.
Signed-off-by: Johan Lafon <johan.lafon@syslinbit.com>
As shadow registers bypass is enabled, an erroneous reading may occur at
each day or second increment. This commit fixes this issue.
Signed-off-by: Johan Lafon <johan.lafon@syslinbit.com>
STM32 RTC driver for the new RTC API.
Can't coexist with old COUNTER based RTC
Though supported by HW, RTC_ALARM still to be supported by driver
Signed-off-by: Kim Bøndergaard <kim.bondergaard@prevas.dk>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move rtc.h to drivers/rtc.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move clock_control.h to drivers/clock_control.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Check clock_control_on return value now that it is checking appropriate
bus is used in the request.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add support for the STM32 Real-Time-Clock leveraging the LL APIs
Signed-off-by: Johannes Hutter <johannes@proglove.de>
Signed-off-by: Kiril Zyapkov <k.zyapkov@allterco.com>
