There are various call to z_soc_cached_ptr() which returns values
in the cached address space and are stored in temporary variables
that are not marked as in the cached address space. This results
in sparse complaining about discarding the cached address space
attribute. These temporary variables are then passed to other
internal memory management related functions which do not have
the concept of cached address space (as it is currently Xtensa
specific). Because of this, we cannot change the signature of
these functions. Instead, we force a change of address space
when those temporary variables are being assigned to suppress
sparse warnings.
Reported-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
With gcc from the zephyr sdk and -Wold-style-declaration is giving this
output:
zephyr/arch/arm/core/aarch32/cortex_a_r/fault.c:101:1: warning:
'inline' is not at beginning of declaration [-Wold-style-declaration]
101 | static void ALWAYS_INLINE
z_arm_fpu_caller_save(struct __fpu_sf *fpu)
| ^~~~~~
I searched to all of the source code to find these further occurances
where inline is not at the beginning of a function declaration.
Signed-off-by: Florian La Roche <Florian.LaRoche@gmail.com>
The `<zephyr/posix/time.h>` header was unused in `fpga_ice40.c`
so remove it.
This fixes an error about `pthread_attr_t` not being defined.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Refcounting is used to track ALH block usage and to
call alh_claim_ownership()/alh_release_ownership() accordingly.
This is however incorrectly done on ALH instance basis, which
means when one instance is released, ownership can be released
even though one ALH instance is still active.
Fix the logic by tracking ALH usage as a global property
which matches the alh_claim_ownership/alh_release_ownership
semantics.
Link: https://github.com/thesofproject/sof/issues/7759
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Align all sensor drivers that are using stmemsc (STdC) HAL i/f
to new APIs of stmemsc v2.3
Requires https://github.com/zephyrproject-rtos/hal_st/pull/16
Signed-off-by: Armando Visconti <armando.visconti@st.com>
AXP192 is a small power management IC, that also
features 5 GPIOS.
Besides GPIO driver this commit also includes needed modifications
in axp192 regulator and mfd driver as LDOIO0 functioanlity
is multiplexed with GPIO0 pin.
Signed-off-by: Martin Kiepfer <mrmarteng@teleschirm.org>
Add Kconfig to set sleep timeout between empty read attempts in rx thread
for ethernet native posix driver.
Signed-off-by: Nicola Ochsenbein <Nicola.Ochsenbein@husqvarnagroup.com>
Many fuel gauge ICs offer a battery cutoff/shipping mode functionality that
cutoff charge from the battery. This is often useful for preserving battery
charge on devices while in storage.
Add battery cutoff support to the fuel gauge API with a generic default SBS
driver showing an example of support in tests.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Added support to connect to an HCI TCP Server. This
allows to do integration tests with other frameworks
that support a virtual hci interface.
Signed-off-by: Victor Chavez <chavez-bermudez@fh-aachen.de>
This code was added to CI after the `-Wshadow` stack was prepared, so it
was not fixed together with the rest.
Signed-off-by: Diego Elio Pettenò <flameeyes@meta.com>
RCX and RC32K oscillators are not precisely trimmed.
This code allows to measure actual frequency of those two
oscillators.
Device tree binding were extended to specify calibration
interval. This interval (in seconds) is used to periodically
call work that will perform oscillator frequency measurement.
For XTAL32K settle time can be provided in device tree.
After this time (depending on actual oscillator used)
XTAL32K is assumed to be stable and low power clock driven by
XTAL32K is considered OK for precise usage in bluetooth.
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
This enables -Wshadow to warn about shadow variables on
in tree code under arch/, boards/, drivers/, kernel/,
lib/, soc/, and subsys/.
Note that this does not enable it globally because
out-of-tree modules will probably take some time to fix
(or not at all depending on the project), and it would be
great to avoid introduction of any new shadow variables
in the meantime.
Also note that this tries to be done in a minimally
invasive way so it is easy to revert when we enable
-Wshadow globally. Source files under modules/, samples/
and tests/ are currently excluded because there does not
seem to be a trivial way to add -Wshadow there without
going through all CMakeLists.txt to add the option
(as there are 1000+ files to change).
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add shell commands to setup, disable, install timeout and feed a
watchdog device.
These commands reflect watchdog API.
Signed-off-by: Benjamin Lemouzy <blemouzy@centralp.fr>
There are situations in which the async API for uart can be provided
by another driver (case in point, uart_rtt), and thus there is no valid
DMA controller for the uart_sam0 driver to talk with.
By separating the configuration, there's no need to exclude samd20-based
boards (that have no DMA peripheral) from the uart_async_api tests.
Signed-off-by: Diego Elio Pettenò <flameeyes@meta.com>
Co-authored-by: Gerson Fernando Budke <nandojve@gmail.com>
Drop the data data structure and use the pin data one directly, also add
a missing const qualifier in the main conf data structure, both save few
bytes of RAM on some platforms.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add basic support of 'regulator-gpio'. For now, it is support
only controling voltage and driver presents only six functions:
* enable and disable the regulator;
* set and get voltage;
* count and list of voltage(s).
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
The prototype of `nrf_802154_energy_detected` callout has changed.
This commit adjusts to this change.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
Use the symbol iface_ctx in place of ictx. This was
introduced seemingly by mistake in PR #61510
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Due to source data pointer having no alignment constraint,
extra care needs to be taken when reading source data
as dword
Signed-off-by: Tomislav Milkovic <tomislav.milkovic95@gmail.com>
This adds support for the max1125x (max11254, max11254)
family of spi adc devices.
Signed-off-by: Mustafa Abdullah Kus <mustafa.kus@sparsetechnology.com>
Ensure the driver enables the LTE radio during init unless boot
in airplane mode is specified.
To ensure the settings applied during init are used, the LTE radio
is turned off during config.
Fix issue where PDP and GPRS connection config could have a mismatched APN.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Binding like "arm,gic" call these flags "flags" whereas binding like
"intel,ioapic" call them "sense". Allow either to work
Signed-off-by: Grant Ramsay <gramsay@enphaseenergy.com>
Commit slters z_impl_nrf_qspi_nor_xip_enable to not call
qspi_device_init in case when xip_enabled has the same value
as requested.
In case when qspi_device_init returns non-zero no further actions
are taken and xip_enabled will not be to set requested value.
Fixes#59535.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Now that all in-tree phys are declared under their mdio bus, drop the
`mdio` property and use DT_INST_BUS to find the bus.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
`k_thread_create` function has the 'adin' device passed as 1st
entry pointer. Therefore the device configuration is obtained directly
from the `dev` structure.
Adujst the code accodringly.
Fixes: 75dde83 ("drivers: ethernet: adin2111: add adin1110 support")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
`DEVICE_DT_INST_DEFINE` requires to pass pointer to the device's
private constant data so make it const.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Since VWGPSM (Virtual Wire GPIO Target-to-Controller) registers are
introduced in npcx9 and later series, the CL moves the related DT nodes
from npcx-espi-vws-map.dtsi (Used for all npcx series) to the specific
dtsi files for npcx9 and npcx4 series.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This is a follow-up to commit fa609e5844.
This driver implements SPI slave operations only and cannot be used
without the corresponding Kconfig option enabled.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
To allow the ADC API unit test to skip tests for non-implemented
features, return -ENOTSUP.
Signed-off-by: Eric Holmberg <eric.holmberg@northriversystems.co.nz>
When we lock an hwspinlock, we must write the CPU identifier to
the hwspinlock register. If we want to unlock the locked hwspinlock,
we have to rewrite the same CPU identifier.
To define the CPU identifier, we use affinity 1 and affinity 2 fields
of the MPIDR register.
Signed-off-by: Aziz Idomar <aidomar@sequans.com>
The intention of hardware spinlock is to allow two processors,
that have no alternative mechanism for accomplish synchronization
and mutual exclusion operations, to share resources (such as
memory and/or any other element).
Here, we add the hwspinlock framework, that makes possible to use
those hwspinlock devices and stay platform-independent. Each
platform wishing to support hardware spinlock must describe a
driver using this framework.
Signed-off-by: Aziz Idomar <aidomar@sequans.com>
Add support for ADIN1110 10BASE-T1L Ethernet MAC-PHY.
The ADIN1110 is an ultra low power, single port, 10BASE-T1L
transceiver design for industrial Ethernet applications and is com-
pliant with the IEEE® 802.3cg-2019™ Ethernet standard for long
reach, 10 Mbps single pair Ethernet (SPE). Featuring an integrated
media access control (MAC) interface, the ADIN1110 enables direct
connectivity with a variety of host controllers via a 4-wire serial
peripheral interface (SPI). This SPI enables the use of lower power
processors without an integrated MAC, which provides for the
lowest overall system level power consumption. The SPI can be
configured to use the Open Alliance SPI protocol or a generic SPI
protocol.
Documentation:
https://www.analog.com/en/products/adin1110.html
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
To be consistent with other xmc4xxx drivers.
A few other device tree changes:
- Rename clock signal option as it's handled by DX1.
- Remove clock-frequency option as it's already added in
i2c-controller.yaml, and interrupts is already defined as array
in base.yaml.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Currently the driver is not configured as controller during initialization.
Any use of I2C in controller mode without an explicit i2c_configure() will
not work.
In this commit the driver is automatically configured.
But, delay the configuraition until first use instead of during init
because otherwise tests/drivers/i2c/i2c_target_api hangs without any
errors on xmc47_relax_kit (when internal pulls are used). This issue
needs to be investigated.
There are a few other fixes/cleanups:
- Change the default master_frequency from XMC4_I2C_SPEED_STANDARD to
I2C_SPEED_STANDARD.
- Use devicetree clock frequency for target configuration instead of
I2C_SPEED_STANDARD.
- Rename master_frequency to bitrate as it's also used by the target
configuration now.
- Remove several uneeded casts.
- Forward backup config in get_config().
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
The simple executor was removed with the usage of the spsc queue but
some stray references remained. Remove those.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Remove redundant function during child node initialization.
Move log related header file near log related macro.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Based on the standard based definitions given in previous commits, the
TX timestamp used for timed TX now refers to the start of PHR. As OT
continues to calculate timestamps based on a "start of SHR" definition,
the duration of the PHY specific SHR is added in the OT adaptation layer
to make up for this OT quirk.
Fixes: #59245
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Builds upon the newly introduced nrf_802154_phr_timestamp_get() function
to calculate RX timestamps according to the timestamp definitions
introduced in earlier commits and removes the prior workaround to
calculate the start-of-frame message timestamp point.
Fixes: #59245
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
