Adds flash partitions and chosen nodes to the mimxrt1024_evk device tree
to support mcuboot on the internal QSPI flash.
Also adds missing zephyr,itcm chosen node.
Also enables FlexSPI flash driver XIP mode support on this board to
support mcuboot.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
add correct binding, fix size to 32MBit, add erase and write
block size to support mcuboot and rename to reflect the actual
flash model.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
the config symbol was missing for some reason even though
the soc does have a flexspi peripheral like most other socs
in the family.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
For each compiler, also set a CMAKE_GCOV var referencing the appropriate
gcov tool.
Tested with gcc and host-gcc on the ChromeOS codebase.
Signed-off-by: Jeremy Bettis <jbettis@chromium.org>
Problem:
In some cases, as described in: https://github.com/zephyrproject-rtos/zephyr/issues/36948
shell backend sends characters to output before serial device
is ready for it. It results in observing additional characters
inserted on the shell input after device boot.
Solution:
Added waiting on DTR signal before sending anything to the output.
Fixes: #36948
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
When Public Key field is set to RFU value then we should send
Provisioning Fail with Invalid Format error.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Counter was not reset between various tests which may hide the fact
that number of preemptions is less than expected.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Stress test that was validating thread safeness was configured to use
higher sys tick rate and targeting qemu_x86 platform. However, it was
also build for other platforms and was failing. Fixing it by extracting
stress tests to separate configuration that is run only on qemu_x86.
Modified the test to fail when number of preemptions is less than
expected only on qemu_x86.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fix MPU fault due to incorrect EV_COUNT, `conn_change`
signal was not accounted for in the array used by k_poll.
Relates to commit 7854088116 ("Bluetooth: ISO: Fixes
missing handling of broadcast ISO TX").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove the locally MSI/MSI-X capabilities ID define and use the
newly introduced one from the PCI Code and ID Assignment
Specification Revision 1.11 document header.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Add defines for all the PCI and PCIe capabilities from the PCI Code
and ID Assignment Specification Revision 1.11 document.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Extend the PCIe API to find Extended Capabilities in the PCI Express
Extended Capabilities located in Configuration Space at offsets 256
or greater.
Note: the Root Complex Register Block is not supported
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Improve the disconnect handling in the sample, and
avoid creating a new cig for each connection.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Instead of disconnecting ISO channels on ACL,
we put them in a non-connected state, and wait for
the ISO disconnect events.
This ensure that the controller has free'd the
ISO channels when the iso disconnect callbacks
are received. It will thus be possible to e.g.
terminate the CIG on the ISO disconnect callback.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When an ISO channel is disconnect on the central, it is
not deallocated, but merely disconnected. This is because,
as per the HCI spec, the CIS handle lives on in the CIG.
Instead of unref'ing the bt_conn to 0, we simply put the
channel and connection in the disconnected state.
This also fixes a few missing returns for
terminating a CIG.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The disconnect handling of ACL connects in the sample was done
incorrect, and caused a call to bt_conn_unref with a NULL
pointer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
There might be a sign extension when a long is promoted to
int_value_type and the former type is smaller than the later.
This produces the wrong output if the specified format is unsigned.
Let's avoid this problem by handling signed and unsigned cases
explicitly. When the type already matches int_value_type then the
compiler is smart enough to recognize the redundancy and removes
unneeded duplications automatically, meaning that the code will stay
small when code size matters.
A similar issue also existed in the restricted %llu case.
The fix is the same as above.
Those fixes exposed wrong results in the printk.c test with %llx
so fix that as well.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Function parameters can be checked without MQTT instance lock being
held. Additionally if NULL parameter would be passed (which this check
tries to handle), then function would return without releasing lock.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Sending of > 2k buffers leads to split socket writes.
Current implementation is not checking for full buffer size.
ztls_sendmsg_ctx proceeds to next iov on sucessful write.
Solution: Add loop into ztls_sendmsg_ctx to process whole buffer
before proceeding to next iov.
Signed-off-by: Pavlo Hamov <pasha.gamov@gmail.com>
Apply a similar fix for cavs_v20 as was done for other cavs platforms in
commit ee7773fb46 ("soc: intel_adsp: fix linker script for XCC").
Without this fix, cavs_v20 build with fail with 0.13.0 Zephyr SDK.
Fixes: 74cc8bee7c ("xtensa: cavs_v20: use uncached addresses to support SMP")
BugLink: https://github.com/thesofproject/sof/issues/4703
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
enable spi driver to support dspi edma
add support for shared dma mux spi port
for shared spi port we need judge the irq source
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
The additional depends on SOC_FAMILY_SAM was redundant.
Add sam4l_ek to dfu sample exclude since it was failing on
arduino_due.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
For the Xtensa platforms (e.g. qemu_xtensa), the first `malloc` call
may fail if the newlib heap base address is such that the first `sbrk`
call returns a 4096-byte aligned address.
Here we add a workaround for Xtensa that allocates and immediately
frees a 16-byte memory block during initialisation so that all
subsequent `malloc` calls succeed.
This commit needs to be reverted once the issue #38258 is fixed.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The #36758 fixes coap_packet_get_payload function by normalizing
offset value in the library. That change create a regression on
UpdateHub. However, the UpdateHub can now use coap_packet_get_payload
function instead manually compute payload start and payload size.
This refactors the current code in favor of coap_packet_get_payload
and fixes the regression.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The user tracing backend allows one to implement weak symbols to perform
user specific tracing, e.g gpio toggling or spi transactions. This adds
a qemu sample that just does a simple printk for each of the traced
functions, but could be changed to do whatever function the user
desires.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Create a new tracing option TRACING_USER that allows
the user to define certain user_sys_trace_... functions
to perform whatever work desired for tracing when
tasks are swiched in/out, during isr enter/exit, and when
cpu is idle.
This infrastructure can be useful for plugging into
locally defined tracing tools or any user-specific
debugging environment.
Signed-off-by: Nicholas Lowell <nlowell@lexmark.com>
IRQ_CONNECT macro last argument is architecture-specific flag,
but now there is instance id at this place.
This PR set architecture-specific flag to 0.
Signed-off-by: Grixa Yrev <GrixaYrev@yandex.ru>
Atmel sam0 adc peripheral have multiple interrupt vectors for same5x
devices. This configure interrupt vector by name to ensure that proper
interrupt handle will be executed.
Fixes#37779
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add a sent callback to bt_iso_chan_ops so that the application
can be notified when an SDU has been sent. This can help the
application decide whether to queue up multiple, or only
have a single ISO PDU enqueue for reduced latency.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The Kconfig refactor that replaces some single-symbol 'if's with
'depends on' added a second entry. That entry allows flash driver
be selected for SoC's without support. This fixes the 'depends on'
entry to allows only SAME/V SoCs.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This commit removes the `timeout_q` from the `struct z_kernel` since it
is no longer used.
Note that the new kernel timeout implementation introduced in the
commit 987c0e5fc1 uses `timeout_list`
global variable in place of it.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
__cxa_atexit implementation provided by MWDT startup code calls
malloc which isn't supported right now. As we don't support
calling static destructors in Zephyr let's provide our own
__cxa_atexit stub and get rid of MWDT startup libs
entirely.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Default weak _exit implementation from ARC MWDT libs
calls _exit_halt from startup libs. As we are going to
get rid of startup libs usage let's implement _exit
stub.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
This script allows us to programmatically query bug-bashers within
a user-supplied time-window.
For example, we held a "Bug Bash Week" August 1-7, 2021 (it was
announced a week early though). The output of the script prints
the "top ten" bug bashers in tab-separated columns in descending
order. The first column is the number of bugs squashed and the
second column is the github user id.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
