The CONFIG_ prefix is reserved in Zephyr, rename CONFIG_SHIFT and
associated constants by adding a RCC_ prefix
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
The stm32mp1 exti ll driver is mandatory for compilation.
add it on top of stm32cubeMP1 version 1.0.0.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Provide required changes to stm32cube HAL and LL for the
STM32MP1X series MCU.
Origin: ST Microelectronics
License: BSD-3-Clause
URL: https://github.com/STMicroelectronics/STM32CubeMP1
Commit: 1.1.0
Purpose: HAL layer for STM32MP1
Maintained-by: External
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Introduce nrfx_nvmc driver into nordic flash driver implementation.
Thanks to that nrf9160 SoC becomes supported by the driver.
nrfx helps dealing with differences with interface to the NVMC
in secure and non-secure execution modes.
This patch adds NRFX_NVMC Kconfig entry for enabling nrfx_nvmc and
select it along with nordic flash driver.
Disabled UICR operation on nRF9160 for non-secure build
as UICR is not available in this mode.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add mcux 2.5.0 drivers and device header files for mimxrt1015. Update
several drivers that were already imported for other SoCs but also apply
to mimxrt1015.
Origins: NXP MCUxpresso SDK 2.5.0
URL: mcuxpresso.nxp.com
Maintained-by: External
Signed-off-by: Ryan QIAN <jianghao.qian@nxp.com>
Add driver and device tree binding for the Low Power Inter-Integrated
Circuit (LPI2C) controllers found in the RV32M1 RI5CY SoC.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Building with clang reports the following warnings:
stm32l4xx_hal_tim.c: error: equality comparison with extraneous
parentheses [-Werror,-Wparentheses-equality]
else if((htim->State == HAL_TIM_STATE_READY))
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
Removing the extra () fixes the warning
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Building with clang reports the following warnings:
stm32l0xx_hal_tim.c: error: equality comparison with extraneous
parentheses [-Werror,-Wparentheses-equality]
else if((htim->State == HAL_TIM_STATE_READY))
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
Removing the extra () fixes the warning
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Building with clang reports the following warnings:
stm32f7xx_hal_tim.c: error: equality comparison with extraneous
parentheses [-Werror,-Wparentheses-equality]
else if((htim->State == HAL_TIM_STATE_READY))
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
Removing the extra () fixes the warning
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Building with clang reports the following warnings:
stm32f4xx_hal_tim.c:3615:24: error: equality comparison with extraneous
parentheses [-Werror,-Wparentheses-equality]
else if((htim->State == HAL_TIM_STATE_READY))
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
Removing the extra () fixes the warning
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Building with clang reports the following warnings:
stm32f3xx_hal_tim.c: error: equality comparison with extraneous
parentheses [-Werror,-Wparentheses-equality]
else if((htim->State == HAL_TIM_STATE_READY))
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
Removing the extra () fixes the warning
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Building with clang reports the following warnings:
stm32f2xx_hal_tim.c: error: equality comparison with extraneous
parentheses [-Werror,-Wparentheses-equality]
else if((htim->State == HAL_TIM_STATE_READY))
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
Removing the extra () fixes the warning
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Building with clang reports the following warnings:
stm32f1xx_hal_tim.c: error: equality comparison with extraneous
parentheses [-Werror,-Wparentheses-equality]
else if((htim->State == HAL_TIM_STATE_READY))
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
Removing the extra () fixes the warning
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Building with clang reports the following warnings:
stm32f0xx_hal_tim.c: error: equality comparison with extraneous
parentheses [-Werror,-Wparentheses-equality]
else if((htim->State == HAL_TIM_STATE_READY))
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
Removing the extra () fixes the warning
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Discovered with pylint3.
Use the placeholder name '_' for unproblematic unused variables. It's
what I'm used to, and pylint knows not to flag it.
Python tip:
for i in range(n):
some_list.append(0)
can be replaced with
some_list += n*[0]
Similarly, 3*'\t' gives '\t\t\t'.
(Relevant here because pylint flagged the loop index as unused.)
To do integer division in Python 3, use // instead of /.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In case of double buffering (two capture buffers), the CSI is
frequently starved because of a lack of buffer in the active pool.
You can find below an example of double buffering scenario:
FREE_BUF ACTIVE_BUF
start: 0 2
frame0_complete: 0 1 (no buffer to load in active)
resubmit_frame0: 1 1
frame1_complete: 1 0 (CSI stopped, active buf = 0)
resubmit_frame1: 2 0
0 -> 2 (CSI restarted)
This patch solves this issue by loading buffer to active at submit
time.
FREE_BUF ACTIVE_BUF
start: 0 2
frame0_complete: 0 1
resubmit_frame0: 1 1
0 -> 2 (Direct load to active)
frame1_complete: 0 1
resubmit_frame1: 1 1
0 -> 2
...
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Use tinycbor from the tinycbor repo directly and drop the library from
ext/.
Add entry to west.yml and update SHA.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adding additional workarounds to cc_pal.h that are necessary due to the
fact that the POSIX subsys does not integrate well with other parts of
Zephyr, as per discussion in #13444. These workarounds are needed when
fcntl.h is included, to avoid symbols from being redefined in POSIX
headers. They disable some POSIX headers and define what is necessary
for the code to compile.
We should aim to remove these when the integration story has improved.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Appears within an 'if MBEDTLS'.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Maybe this is some "just in case" thing that got copied around. There's
no need to have a blank line at the beginning or end of Kconfig files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
If we enable newlib we run into an issue with fcntl.h and the openamp
proxy support. We don't utilize the proxy support so just disable it by
default.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Pull in libmetal SHA 59a10acbb0bb684c1a75488f11878cb984170c81 to get
some build fixes related to newlib.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
We previously added a cmake hack to alias rt1052 A0 part numbers (A
suffix) to A1 part numbers (B suffix), but this hack did not work
correctly when a board uses A1 part numbers directly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a new config HAS_MCUX_FTFX to conditionalize the mcux flash driver
on socs that support it. Selects HAS_MCUX_FTFX on all kinetis socs
except kw40z, because even though this soc has the relevant hardware,
its CMSIS header file is not compatible with the mcux flash driver in
ext/.
This change also prevents enabling the mcux flash driver on lpc and imx
rt boards.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This patch unifies the way NRFX_RTC* Kconfig options are handled in
nrfx_config*.h files for particular Nordic SoCs, so that these files
are easier in maintenance. For nRF52810 and nRF9160, this means adding
of support for these options, since it was missing.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The NRFX_UARTE* Kconfig options were handled only in the nrfx_config
for nRF9160. This commit updates remaining nrfx_configs, so that these
options are handled uniformly for all Nordic SoCs.
The NRFX_UART option, although defined in ext/hal/nordic/Kconfig,
were not supported in any of nrfx_config files, effectively making
it impossible to use nrfx_uart.c driver. This commit corrects this.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This is a follow up to commit f0cf126015a073a5417e6fcfd06b2d41f0f18d87.
Entries in nrfx_config_nrf52810.h are synchronized with the template
from nrfx v1.6.2. In particular, the entries for SPI0, TWI0, and UART0
peripherals are added, so that these peripherals can be actually used
by nrfx drivers in Zephyr.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Definitions of these two options were missing, altought the symbols
that would be created for them were already referenced from
`ext/hal/nordic/nrfx_config_nrf9160.h`.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
These entries should have been added in the initial version of
this file (in commit 99bab3f478)
but their absence was overlooked.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit removes build warnings in the SimpleLink SDK's driver.c file
by updating CMakeLists.txt
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
When using the wifi driver, we should automatically select
CONFIG_POSIX_API and CONFIG_PTHREAD_IPC. This is necessary given the
code in the new SimpleLink host driver from the SimpleLink SDK uses
pthread and sem.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
We should use the headers from Zephyr, not the ones provided by TI for
their posix implementations.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
We are using the external spawn option, hence must make a change
to point to our os_Spawn implementation.
We are also supplying errno values that are missing from Zephyr errno.h
and the external errno setter function, to allow the SimpleLink
driver.c to compile.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Add/Update files taken from TI CC32XX SDK, including
- peripheral drivers
- driverlib (HAL)
- WiFi host driver and porting layer interface headers
Origin: Texas Instruments cc32xx SimpleLink SDK
URL: http://www.ti.com/tool/download/simplelink-cc32xx-sdk
Purpose: Provide driver libraries and HAL for TI CC32XX SoC
Maintained-by: External
Fixes#11126
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The mbedtls library has some globals which results in faults
when user mode tries to access them.
Instantiate a memory partition for mbedtls's globals.
The linker will place all globals found by building this
library into this partition.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
