In order to align with macros used to obtain a device reference (e.g.
DEVICE_DT_GET), align the PM macros to use "GET" instead of "REF". This
change should have low impact since no official release has gone out yet
with the "REF" macros.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The gd32_exti_isr function may be unused if the GPIO driver is not
enabled but EXTI is (no IRQ will connect to it). This may be improved in
the future by requiring explicit enablement of the exti DT node.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Theoretically, source id check is not mandatory in the context we use
VT-D here (i.e. non VM one, just multi-vector MSI support)
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Not sure this is requered as we do not mangle with domains, but let's
make sure this cache is clear.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A surprising issue: while sys_set_bit() on VTD_GCMD_REG work on
apollo_lake, it seems to create border effect on elkhart_lake: it may
reset some previous bit to 0.
So switching to full write of the register at once, which works for
both.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
VT-D will only be enabled if MSI multi-vector will also be requested,
on x86_64, for all boards BUT QEMU ones.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no point to enable VT-D if PCIE MSI multi-vector support is not
requested, as VT-D is uniquely being used to remap MSI multi-vector
based interrupts.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Those MMIO registers might be mapped in RAM and thus it's
really important to keep storage space for such mapping.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
QI operation are not supposed to last forever.
It's not an actual timeout based on clock, but a dummy counter instead.
That's because system clock might not have beed initialized yet, since
VT-D's init comes first (and that same init will use QI...)
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Depending on a VT-D capability, it might be necessary to flush objects
from the cache.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Looks like it's mandatory to invalidate the Interrupt Entry Cache in
VT-D and the only way to do so is to enable Queued Interface.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
IR faults are non-recoverable, so it's good to know why. Thus let's
handle the fault event and print the fault.
Other faults are printed as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Looks like a source of fault if pieces of IRTE are written instead of
the whole 64 bits block it belongs to.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If VT-D's interrupt remapping is in place, all IOAPIC RTEs need to get
remapped as well (or then they will be simply blocked).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adding a way to pre-install the irg/vector on an irte and a way to get
an irte based on irq/vector.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will not only be used by MSI remapping but by all relevant
interrupts.
Fix also IRTE settings:
- handle x2apic for destination id
- destination mode is always logical (as for IOAPIC)
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In XAPIC mode, it's possible to tell VT-D to let interrupt in compatible
format passing through.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
SHV bit depends on the number of vectors allocated.
If it's facing a multi-vector MSI array, it will set the bit.
If not the bit must be 0.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of using maskstatus to see if an interrupt has fired,
use finalstatus instead. It has been observed that some
controllers do not update maskstatus correctly with incoming
interrupts, but finalstatus works fine.
FYI, the DW driver in Linux is also using finalstatus.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add initial support for the GigaDevice External Interrupt Controller.
This driver is required to manage GPIO interrupts. Only EXTI lines 0 to
15 are supported for now (no LVD, RTC, etc.). Driver can be extended in
the future to add support for extra EXTI lines.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The device PM subsystem _depends_ on device, not vice-versa. Devices
only hold a reference to struct pm_device now, and initialize this
reference with the value provided in Z_DEVICE_DEFINE. This requirement
can be solved with a forward struct declaration, meaning there is no
need to include device PM headers.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Port some drivers to the recently introduced macros to showcase its
usage and be able to do some initial testing (nRF52840).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Define the device using DEVICE_DEFINE macro, so that a single option can
be used regardless of PM being enabled or not.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The PM callback is no longer referenced as "pm_control" but
"pm_action_cb", so reflect this new naming on the callbacks.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
MEC172x eSPI driver, eSPI pin programming, interrupt updates related
to eSPI and other updates for MEC172x eSPI driver.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
When the ITS is configured with a large number of DeviceID bits,
up to 32, the Device Translation Table can be configured as
"indirect" mode consisting of a 2-level table with the first
level entries pointing to a second level table for each
group of DeviceIDs.
This is necessary to support platforms with DeviceID bits > 16.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Implement the CPU idle task. The system should enter this task when
there is no any task to ensure power saving.
Tested on it8xxx2_evb board. It will reduce 12.5mA when system enters
the CPU idle task.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
This kconfig is only used for one board and is simply an alias
to another kconfig. So remove CONFIG_DW_ICTL_OFFSET and apply
the value directly to the other kconfig.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
All ARC CPUs (supported by Zephyr) don't lose core interrupt
controller configuration after switching to sleep mode / modes,
so we don't need to save & restore it's configuration with PM.
This PM code most likely was added for Arduino 101 (Genuino 101)
board which isn't supported by Zephyr anymore - so we can drop
it.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
We don't use '_VectorTable' in the driver, so let's drop it's
declaration.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
This implements support for the optional Interrupt Translation Service
(ITS) module of the GICv3 Interrupt Controller.
The current implementation is designed for MSI/MSI-X interrupt delivery
in mind.
The gicv3 driver calls each ITS INVALL command when LPI interrupts are
enabled/disabled.
A simple atomic integer is used to allocate unique LPI INTIDs to ITS
users.
CPUs numbers are directly mapped as ICIDs into the Collections Table.
As a limitation it doesn't support indirect Device table to simplify
implementation but may use a large amount of memory.
INV, DISCARD, MOVI and MOVALL commands are not implemented.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
The LPI (Locality-specific Peripheral Interrupts) are edge-triggered
message-based interrupts that can use an Interrupt Translation
Service (ITS) to route an interrupt to a specific Redistributor and
connected PE.
This implement the necessary LPI support when an ITS is enabled.
The LPI states are stored in memory-backed tables.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Code removed:
- IT8XXX2 doesn't support soc level software interrupt hence remove
them.
- To use common macro to access csr (control status register).
- To remove CONFIG_RISCV_HAS_PLIC related code. IT8XXX2 uses its own
interrupt controller code.
- To remove ite_write and ite_read. We don't use them anymore.
Code changed:
- Return true from arch_irq_is_enabled() when external interrupt-enable
bit, and SOC's IER are both true.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
When affinity routing is enabled for Non-secure state
( GICD_CTLR.ARE_NS is '1'), need to set routing information
for the SPI interrupt.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
This commit now sets the Zephyr library property `ALLOW_EMPTY` to
silence the warning:
`No SOURCES given to Zephyr library: drivers__interrupt_controller`
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
