Concurrent HTTP POST requests on different HTTP2 concurrent streams
require that the client's header_capture_context is re-used to capture
headers on a second stream before all of the body data has been received
(and sent to the application) on the first stream.
As a result, any captured headers must be sent to the application
callback before any headers can be received on a different stream. In
practice this means that for HTTP2 the application callback is called
for the first time on receiving a headers frame, before any data frames
are received. All subsequent application callbacks will not include the
request header data.
While this mechanism is not necessary for HTTP1, it is also updated to
only send headers in the first application callback for consistency.
Fixes#82273
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
To correctly handle concurrent HTTP POST requests via different http2
streams on the same client context, it is necessary to store the
resource detail at an HTTP2 stream level rather than at an HTTP client
level, otherwise only one resource detail can be stored.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Implement a sample app to perform basic GPIO tracing.
Signed-off-by: Alexander Lay <alexanderlay@tenstorrent.com>
Signed-off-by: Yang Xu <yangxu@tenstorrent.com>
If GPIO tracing is enabled, then the system will track
various GPIO pin events.
Signed-off-by: Alexander Lay <alexanderlay@tenstorrent.com>
Signed-off-by: Yang Xu <yangxu@tenstorrent.com>
Add missing closing brace and semicolon to code comment
Signed-off-by: Alexander Lay <alexanderlay@tenstorrent.com>
Signed-off-by: Yang Xu <yangxu@tenstorrent.com>
Update TF-M reference to include a couple of commits which are
useful to properly size the stack & heap memory for Mbed TLS
in order to handle RSA signatures with 2048-bits (previously
only 1024-bits were possible).
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
So when building with twister we get the same executable name
as with compile.sh
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This test was starting to rot: BOARD should have been replaced
with BOARD_TS. Let's also remove a few duplicate checks
and definitions.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Some backends use DMA. Usually, DMA doesn't work correctly, when memory
to transfer is cached. Add a config to place the common buffers in the
nocache section.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Disable and enable SPI module before every transaction for STM32H7
chips. It is a recommended way in the STM32 RM. In another case, a first
byte of a transaction is always 0x00.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
STM32H7 chips have additional configuration regarding underrun event.
Configure the underrun behaviour correctly to use the underrun pattern
and clear the underrun bit before sending new data.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Move enabling CS interrupt at the end of the backend configuration,
when everything is ready.
It prevents handling the interrupt, when something is not prepared e.g.
DMA is not configured.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Fix support for clock domains. Create define that identify if
clock domain was selected in any of the st_stm32_spi_host_cmd nodes.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Add the DT_DMAS_CELL_BY_NAME_OR macro. It is almost the same as
DT_DMAS_CELL_BY_NAME, but it uses DT_PHA_BY_NAME_OR instead of
DT_PHA_BY_NAME.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
The implementation of can_mcan_start() function
hides retun code of underlying function.
It makes root-cause search more difficult.
This change strives fro transparent error code
propagation to higher software layers.
Signed-off-by: Alexander Kozhinov <ak.alexander.kozhinov@gmail.com>
toolchain/xcc.h includes toolchain/gcc.h in some configurations
and this will lead to build errors as __in_section_unique_named()
and friends are defined multiple times.
Add ifdef guards to main definitions in gcc.h.
Fixes: 7e32b2069d ("toolchain: xcc: Avoid undefs")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Default the Minimum encryption key size to 16.
Key with reduced size is easier to brut force.
Disable LE legacy pairing by default since it's not secure.
These defaults should suite majority of newly developed applications.
It's better to use sensible more secure defaults,
so applications that really need less secure option consciously change it,
not the other way around.
This may help to prevent downgrade attacks.
Signed-off-by: Sergey Korotkov <sergey.korotkov@nordicsemi.no>
Commit add `modcarrier` shell command for Openthread diagnostic mode.
Command can transmit modulated carrier out of device for test purposes.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
The deprecated CONFIG_NET_SOCKETS_POSIX_NAMES option is removed.
If one wishes to use POSIX API socket calls, then CONFIG_POSIX_API
option needs to be enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Many NXP socs had the following defconfig:
```
config PINCTRL_IMX
default y if HAS_IMX_IOMUXC
depends on PINCTRL
```
However, the PINCTRL_IMX option already has:
```
config PINCTRL_IMX
bool "Pin controller driver for iMX MCUs"
depends on DT_HAS_NXP_IMX_IOMUXC_ENABLED
depends on HAS_MCUX_IOMUXC || HAS_IMX_IOMUXC
default y
help
Enable pin controller driver for NXP iMX series MCUs
```
So the soc level defconfigs are redundant.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Log the create BIG params for debugging purposes.
Also slightly modifies the `qos` struct to use a more
suitable struct to avoid always doing `qos->tx->` and
can now just be `qos->`.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added dppic0 node label, alongside the dppic to maintain backward
compatibility. The use of dppic0 is preferred.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Changed the CMakeLists to enable the nrfx_gppi utilities based solely on
the CONFIG_NRFX_GPPI Kconfig. This unifies the configuration on all nRF
SoC families.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
The resource reservation header is now included according to a Kconfig
value. The Kconfig can be overriden out-of-tree in case a different
header is needed.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Moving the blob client, dfd server and dfu server to their own
elements and increasing the CONFIG_BT_MESH_TX_SEG_MAX to 8 to fit
new composition data into composition data page status message.
Standalone mesh blob client and DFU distributor/update server models
requires one element and those elements only contain the main models
and the models they extend to.
Referring to MshMBT_v1.0 Section 6.1:
The BLOB Transfer Client model defines the messages listed in Table 6.1
, and requires one element: the BLOB Transfer Client Main element. The
BLOB Transfer Client Main element contains the BLOB Transfer Client
main model.
And referring to MshDFU_v1.0 Sections 6.1.1 and 6.2.1:
6.1.1
The Firmware Update Server model adds the state instances listed in
Table 6.1 and Table 6.2 and the messages listed in Table 6.3 to the
model it extends, and requires one element: the Firmware Update Main
element. The Firmware Update Main element contains the Firmware Update
Server main model and all the models that the main model extends.
6.2.1
The Firmware Distribution Server model adds the state instances listed
in Table 6.7 and Table 6.8 and the messages listed in Table 6.9 to the
model it extends, and requires one element: the Firmware Distribution
Main element. The Firmware Distribution Main element contains the
Firmware Distribution Server main model and all the models that the
main model extends.
Signed-off-by: alperen sener <alperen.sener@nordicsemi.no>
Referring to MshDFU_v1.0 Sections 6.1.1, 6.2.1 and 7.1.1 model
descriptions: DFU/DFD server/clients extend BLOB Transfer root models
and DFD server requires Firmware Update Client on the same element. For
this reason we need to make sure that those main models or root models
exist on the same element. And also firmware update client can not be
forced to be in the first element.
For all model extention call return the error code in case of an error.
Signed-off-by: alperen sener <alperen.sener@nordicsemi.no>
update test cases for twister
1. test_errors.py add protection.
2. test_handlers.py change call to status
3. test_testsuite.py change call to status
The log traces for TwisterException objects only.
And the stack trace output follow the same rules for all exceptions,
but StatusAttributeError with its dedicated handlers.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
