Policy manager header has to be in the include for applications.
Also it had several function prototypes that are not part of the policy.
These functions were moved from the policy header to a dedicated private
header.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
PM_STATE_INFO_DT_ITEMS_LIST macro documentation was wrong. The example
usage was returning the wrong type and the macro name was also not
correct.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
I made an alignment error in a dts binding, but the build was
successful. After some debugging I found the following warning
explaining the problem:
'/home/casper/src/zephyrproject/zephyr/dts/bindings/gpio/
gpio-keys.yaml' appears in binding directories but isn't valid
YAML: while parsing a block mapping
in "<unicode string>", line 11, column 8
did not find expected key
in "<unicode string>", line 18, column 9
I think this should be an error as there shouldn't be any invalid yaml.
Signed-off-by: Casper Meijn <casper@meijn.net>
The macros are used to get the pin(s) of a given driver instance. Add
_INST prefix to match convention used by the devicetree.h. The original
macros can now be used to obtain pin(s) of an arbitrary device instance
identified by the nodelabel.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Use ticker_yield_abs interface to make scan window on
primary channel to yield when trying to scan auxiliary PDUs.
Fixes#30244.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add ticker_yield_abs interface to reduce ticks_slot_previous
value when radio events yield/stop earlier than their time
reservations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Query the numerical network operator id, location area code (LAC)
and cell id. Following AT commands are used:
AT+COPS?
AT+CEREG?
Functionality is enabled by CONFIG_MODEM_CELL_INFO=y.
Tested with uBlox SARA-R410M-02B.
Signed-off-by: Hans Wilmers <hans@wilmers.no>
Query the numerical network operator id, location area code (LAC)
and cell id. Following AT commands are used:
AT+COPS?
AT+CEREG?
Functionality is enabled by CONFIG_MODEM_CELL_INFO=y.
Tested with uBlox SARA-R410M-02B.
Signed-off-by: Hans Wilmers <hans@wilmers.no>
Implement numerical network operator id, location area code (LAC)
and cell id in modem context and modem shell.
Please note that the functionality to query these values must be
implemented in the modem driver.
Signed-off-by: Hans Wilmers <hans@wilmers.no>
The old default of 1 makes provisioner devices useless, as they can only
provision themselves before they run out of space.
Increase the default value for CONFIG_BT_MESH_CDB_NODE_COUNT to 8.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Add radio peripheral to nrf52820 DTS. The peripheral description
includes antenna matrix congiuration for Direction Finding extennsion.
Appropriate binding file for nRF radio peripheral already egxists.
There is no default antenna matrix configuration. Antennas number
and GPIOS mapping to DFEGPIOS is project specific.
Complete configuration must be provided by end user as overaly.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
This API meets the requirements for marking an API stable:
- Test cases for the new API with 100% coverage: yes;
we have had coverage for every API macro since the beginning.
- Complete documentation in code. All public interfaces shall be
documented and available in online documentation.: yes, in the
reference documentation:
https://docs.zephyrproject.org/latest/reference/devicetree/api.html
- The API has been in-use and was available in at least 2 development
releases: yes; this API ws introduced in v2.3.
The basic design involving node identifiers and the macros that create
and operate on them has not changed since the API was introduced, and
it is in widespread use throughout the tree. As we head into a new
LTS, it's time to mark it stable.
This is more of an acknowledgement of reality than a big change, as I
don't see any backwards incompatible changes since the API was first
introduced in v2.3. (We have deprecated a lot of label related macros
that are no longer required now that we have DEVICE_DT_GET and
friends, but they're still there, and we're still testing them, just
as if this were a stable API.)
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Modify aics.c to use the bt_aics struct instead of the
bt_aics_server struct. This is done so that there is less
difference between the internal struct usage and the struct
type used in the API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the struct from bt_vcs to bt_vcs_included, and
rename bt_vcs_get to bt_vcs_included_get as that is more
descriptive of the value returned.
Furthermore, this will also allow us to use bt_vcs as
an opaque pointer to a VCS service instance (local
or remote) to match the service instance pointers of
AICS and VOCS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the struct from bt_mics to bt_mics_included, and
rename bt_mics_get to bt_mics_included_get as that is more
descriptive of the value returned.
Furthermore, this will also allow us to use bt_mics as
an opaque pointer to a MICS service instance (local
or remote) to match the service instance pointers of
AICS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
commit 5e9c583c24 ("arch/x86_64: Terrible, awful hackery to
bootstrap entry") introduced a terrible trick which begins execution
at the bottom of .locore with a jump, which then gets replaced with
NOP instructions for the benefit of 16 bit real mode startup of the
other CPUs later on.
But I forgot that EFI enters in 64 bit code natively, and so never
hits that path. And moving it to the 64 bit setup code doesn't work,
because at that point when we are NOT loaded from EFI, we already have
the Zephyr page tables in place that disallow writes to .locore.
So do it in the EFI loader, which while sort of a weird place, has the
benefit of being in C instead of assembly.
Really all this code needs to go away. A proper x86 entry
architecture would enter somewhere in the main blob, and .locore
should be a tiny stub we copy in at runtime.
Fixes#36107
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
After lwm2m async io was introduced with 32989a38f0,
one instance of function lwm2m_send_message() was left unchanged,
and makes build to fail when boostrap support is enabled.
Signed-off-by: Kiril Petrov <retfie@gmail.com>
Mark qemu_x86 and native_posix drivers to support both
TXTIME and PTP clock so that we can use txtime sample application
for testing.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Simple tests that verify that TXTIME parameters can be passed from
application code into the driver and vice versa.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Simple tests that verify that Qbu parameters can be passed from
application code into the driver and vice versa.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow caller to either set or receive various Ethernet Qbu
configuration options defined in IEEE Std 802.1Qbu-2016
specification.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Simple tests that verify that Qbv parameters can be passed from
application code into the driver and vice versa.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow caller to either set or receive various Ethernet Qbv
configuration options defined in IEEE Std 802.1Qbv-2015
specification.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Flag Sphinx tabs style properties as !important, it looks like the
default style used by the latest extension version take precedence.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Zephyr Bluetooth Mesh did not check whether the proxy message
was actually sent out, so that the response message could
not be received during reset. It did not solve the status
callback of the proxy sending message, so a new problem was
introduced after PR(#28457) merged.
bt_mesh_prov_send(&buf, public_key_sent))
This PR will try to solve the above problem, and will fix
the problem due to thread competition, and PR(#26668) will
not be necessary.
Compared with PR(#30138), it no longer consumes extra RAM
space and supports synchronization of group addresses
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Configures lpuart3 pinmuxes. This instance is attached to the Arduino
serial header pins and can be used for Bluetooth serial HCI with a
frdm_kw41z or other BLE controller shield.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Configures flexcomm2 to operate in USART mode and enables the associated
peripheral clock and pinmuxes. This instance is attached to the Arduino
serial header pins and can be used for Bluetooth serial HCI with a
frdm_kw41z or other BLE controller shield.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Configures flexcomm4 to operate in USART mode and enables the associated
peripheral clock and pinmuxes. This instance is attached to the Arduino
serial header pins and can be used for Bluetooth serial HCI with a
frdm_kw41z or other BLE controller shield.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This shield is working out of the box on Arduino connector,
even if it is not with all standard Arduino SPI CS/CLK pins.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Switch from using internal 6pf to internal 7pf load capacitor for LFXO.
Use a default clock accuracy of 50PPM as this matches lab results.
50PPM should be sufficient for common operating temperatures of
25degC +- 15.
Signed-off-by: Johan Stridkvist <johan.stridkvist@nordicsemi.no>
When frame counter is managed by the radio driver the upper layer
needs to be informed about the frame counter changed. The upper layer
looks for the most recent frame counter in the transmitted frame,
this is why the tx_payload need to be updated after processed by
the radio driver.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Fixed issue that caused message to be not correctly reset even after
it is consumed after send sets errno to EAGAIN or EWOULDBLOCK
Signed-off-by: Dominik Dess <dominik.dess@grandcentrix.net>
Removing the CONFIG_TEST=y setting from the TF-M
integration samples prj.conf. TEST does not need
to be enabled in these samples.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The EFR32MG21 doesn't have a RMU and thus the driver isn't relevant for
that SoC series. Add a Kconfig exclusion so the driver isn't available
on EFR32MG21 SoCs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
