The purpose of this change is to allow to enable more than one
backend at once by removing choice from ipc-service backend Kconfig
and depending backend Kconfig option on existing of correct compatible.
Overwriting IPC_SERVICE_BACKEND option in some places is removes
as no longer needed.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The Bluetooth HCI driver based on the RPMsg transport now uses the IPC
service module. The compatible Bluetooth sample - HCI RPMsg - has also
been migrated to the new IPC solution.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
- Added config BT_HCI_SETUP to enable HCI vendor-specific Setup feature,
- Added pointer to 'setup' function in bt_hci_driver structure.
BT_HCI_SETUP feature is useful when the BT Controller requires execution
of the vendor-specific commands sequence to initialize the BT Controller
before the BT Host executes a Reset sequence. To enable this feature the
CONFIG_BT_HCI_SETUP should be enable.
Fixes#41140
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
With the introduction of `EXPERIMENTAL` and `WARN_EXPERIMENTAL` in
Zephyr all subsys/bluetooth and drivers/bluetooth/hci settings having
`[EXPERIMENTAL]` in their prompt has has been updated to include
`select EXPERIMENTAL` so that developers can enable warnings when
experimental features are enabled.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Follow up on commit bfd45e5b8c
("drivers: remove Kconfig option CONFIG_UART_CONSOLE_ON_DEV_NAME")
Remove Kconfig options
CONFIG_BT_UART_ON_DEV_NAME and CONFIG_BT_MONITOR_ON_DEV_NAME
since all UART drivers are converted to devicetree and we can just use
DEVICE_DT_GET(DT_CHOSEN(zephyr_bt_uart)) and
DEVICE_DT_GET(DT_CHOSEN(zephyr_bt_mon_uart)).
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This patch modifies Bluetooth HCI RPMsg drivers and samples to use
RPMsg Service instead of configuring OpenAMP directly in the driver
or the sample.
Co-authored-by: Piotr Szkotak <piotr.szkotak@nordicsemi.no>
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Add BT_QUIRK_NO_AUTO_DLE quirk option for HCI rpmsg driver
when the Zephyr open source BLE controller is used.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixes#28275 by adding bluetooth HCI spi driver priority lower
(75 instead of 50) than SPI (70) to avoid device_get_binding
to return NULL because the device was not initialized.
Signed-off-by: Jeremy LOCHE <lochejeremy@gmail.com>
Stack overflows where seen in heavy logging conditions since printk
modifications that increased "slightly" RAM consumption
(973487fdad).
Increase RX Thread stack size to avoid these overflows.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The CONFIG_BT_RPMSG_NRF53 should depend on the SOC, not the BOARD
definition. Otherwise this will break for custom boards.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Both ST and STM32 modules where using same HAS_STLIB Kconfig
symbol.
Now that each module is createing is own lib, we need to be able
to distinguish libs.
Depends on zephyrproject-rtos/hal_stm32/pull/52
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Fasten events handling by unloading callback treatment.
A RX thread is created. IPM RX events are dumped in a FIFO
which is processed in the thread context.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
We rename the nRF53 Dev Kit board target (nrf5340_dk_nrf5340)
to nrf5340pdk_nrf5340. We update all associated references
in the supportive documentation and all nRF5340-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Same deal as in commit eddd98f811 ("kconfig: Replace some single-symbol
'if's with 'depends on'"), for the remaining cases outside defconfig
files. See that commit for an explanation.
Will do the defconfigs separately in case there are any complaints
there.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Prior to this you would get compilation error when building
samples for the nrf5340_dk_nrf5340_cpuappns board.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Convert how we get the various chosen properties like "zephyr,console"
to use the new kconfig functions like dt_chosen_to_label.
Because of how kconfig parses things we define a set of variables of the
form DT_CHOSEN_Z_<PROP> since comma's are parsed as field seperators in
macros.
This conversion allows us to remove code in gen_defines.py for the
following chosen properties:
zephyr,console
zephyr,shell-uart
zephyr,bt-uart
zephyr,uart-pipe
zephyr,bt-mon-uart
zephyr,uart-mcumgr
zephyr,bt-c2h-uart
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Get spi hci driver to define its own rx thread, in order
not to mix with bt own RX thread as driver use bt_recv_prio
that expect to be used in a different thread than BT host one.
Fixes#15714
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Implement HCI driver for STM32WB. It allows host to controller.
It is based on ST library allowing communication over RAM shared
bewteen chip's C-M4 and C-M0 cores.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Replace generating CONFIG_ symbols with DT_ symbols for chosen
properties like 'zephyr,console' or 'zephyr,bt-mon-uart'. We now use a
kconfigfunctions (dt_str_val) to extract the info from dts into Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert the HCI SPI driver to get the SPI and GPIO settings from Device
Tree instead of Kconfig. The "zephyr,bt-hci-spi" binding is used as
a common one for this purpose ("st,spbtle-rf" is removed), to take
advantage of the new DT_<COMPAT>_<INSTANCE> generated macros and get
rid of related fixups and aliases.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Every board that uses dts-enabled spi drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_SPI_PINS and
HAS_DTS_SPI.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Every board that uses dts-enabled spi drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_SPI_DEVICE and
HAS_DTS_SPI.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
- Remove redundant 'n' defaults. 'n' is the default value for bool
symbols.
This makes the auto-generated documentation clearer as well: You get
"implicitly defaults to n" instead of
"- n if <propagated dependencies>".
- Shorten
<type>
prompt "foo"
to
<type> "foo"
This works for all types, not just bool.
- Various formatting nits.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Configure BlueNRG in controller w/o host.
By disabling 'HCI_reset' via the quirk, we can request to
BluesNRG hardware to be on controller mode just after it is ready.
By the way it's no necessary to manage a 'HCI_reset' when BluesNRG are
initialised (and on controler mode).
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
SPI driver has its own rx thread, select BT_RECV_IS_RX_THREAD.
This fixes build issue because of undefined CONFIG_BT_RX_PRIO.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Introduce a custom HCI driver for the native POSIX port, which opens a
HCI User Channel socket to the Linux kernel to gain access to a local
Bluetooth controller.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Name the choice of BT HCI driver bus in order to config it
in the board's Kconfig.defconfig file.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
In order to generate GPIO definition for control pin of BlueNRG module
define reset-gpio and irq-gpio in st,spbtle-rf yaml binding.
Add HAS_DTS_SPI_PINS kconfig symbol to control use of the '#define'
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
It used to be that there was a fairly empty "Bluetooth Drivers" menu
entry in the drivers menu. This entry was present even though there
was no drivers/bluetooth code being compiled in.
With this patch "Bluetooth Drivers" will no longer be present when
BT_CONTROLLER is enabled.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are two kinds of HCI implementations. Bluetooth drivers in
drivers/bluetooth that implement HCI by using a wired serial
transport layer to talk to an external controller chip. And a
bluetooth controller in subsys/bluetooth/controller that directly
talks to an internal on-chip controller node.
Currently, when the the subsys/bluetooth/controller is used there
still exists exposed to the user a bluetooth driver configuration
menu, even though no external bluetooth driver is in use. This is due
to a dependency on certain configs in driver/bluetooth that are needed
even though no external controller is used.
This patch moves one of these configs, BLUETOOTH_HCI_RESERVE, from
drivers/bluetooth/hci/Kconfig to subsys/bluetooth/host/Kconfig such
that eventually we can omit the entire Bluetooth driver menu option.
This re-organization does not change when the config can be enabled.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
patch uses chosen property zephyr,bt-uart, zephyr,uart-pipe
and zephyr,bt-mon-uart to determine the uart instance to be
used for bluetooth,uart_pipe and bluetooth_monitor and generate
appropriate configs.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Since the HCI driver debug option applies to both files in
drivers/bluetooth and subsys/bluetooth, the configuration option itself
now lives in the top-level Kconfig file for consistency.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
A subsequent patch will start reusing HCI command buffers for
receiving the response, so the distinction of received vs sent data
headroom would just make the code unnecessarily complex. Instead, just
merge these two variable into a single one.
Change-Id: I31d846331939f1a2270df7ed0c75112825e16493
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Drop the BLUETOOTH_SPI_RX_BUFFER_SIZE and BLUETOOTH_SPI_TX_BUFFER_SIZE
config options by fixing the max SPI buffer length to 255, as used by
the X-NUCLEO-IDB04A1 BSP. This simplifies the rx/tx buffer handling, and
avoids a potential spi rx stack overflow depending on the config values
set by the user.
Change-Id: Ifa7fd086016abda4bdcf9638f28b38d001a288c5
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
This new option is used to encapsulate the logic specific to devices
implementing the BlueNRG Bluetooth stack (e.g. X-NUCLEO-IDB05A1).
The current BlueNRG specific logic covers the HCI Reset handling and
the manual control of the SPI Chip Select line (normally not needed since
spi_transceive is also responsible for controlling the SPI CS line).
Change-Id: I5db4addf873eee0af2d957e2181c50aac53ab656
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This driver acts as a pass-through, taking raw HCI data, converting
it to SPI comms and vice versa. It works in the same way as the
existing H:4 and H:5 drivers, only it uses SPI instead of UART.
In this first release, the only BLE board which has been tested is
the X-NUCLEO-IDB05A1:
http://www.st.com/en/ecosystems/x-nucleo-idb05a1.html
Although the current supported SPI format works like the one below,
it should be trivial to adapt it to support other chips with a
different format.
SANITY CHECK = 0x02
SPI WRITE = 0x0A
SPI READ = 0x0B
Tx Format:
[HOST] {SPI WRITE} 0x00 0x00 0x00 0x00 {HCI MESSAGE ...}
[CHIP] {SANITY CHECK} {FLASH SIZE} 0x00 0x00 0x00 {0xFF * MESSAGE LEN}
Rx Format:
{IRQ LINE GOES HIGH}
[HOST] {SPI READ} 0x00 0x00 0x00 0x00 {0xFF * BYTES TO READ}
[CHIP] 0x02 {FLASH SIZE} 0x00 {BYTES TO READ} 0x00 {HCI MESSAGE ...}
Change-Id: I4a00711c922d9ea02c5e2afb0d16715e413b1ed5
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Completely redesign the H:4 driver to utilize its own thread and
select the new RECV_IS_RX_THREAD Kconfig option.
Jira: ZEP-1483
Change-Id: I0ca0661b66d564e5edc1b8505706d6bb76632e79
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This option has not been used so far and will only contribute
unnecessary complexity in subsequent patches that introduce a concept
of combined RX buffers.
Change-Id: I53e0ce5155eebc352b84ba41b30ecb9d9958699f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
All boolean options default to 'n' without the need to explicitly
state this. It's only the cases where we want 'default y' where we
need to state this.
Change-Id: I47dbda62462ea437a2423b8508ea2cc640a22e41
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
