SPI driver is current working for common SPI devices.
However, addressable LED like WS2812 requires MOSI line to be
default LOW during initialization. This PR adds such option.
This has no effect on common SPI operation.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Flaky tests give innacurate test summary indicating a misleading
passing test suite. Add new status for flaky tests.
Signed-off-by: Al Semjonovs <asemjonovs@google.com>
Add no-timers configuration to sample.minimal to check that
it's actually working in runtime.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
This version introduces support for the syscalls extension,
which greatly reduces the amount of bandwidth being used
for tracing syscalls.
Signed-off-by: Aron Lander <aron.lander@percepio.se>
When a PAwR sync connects to a PAwR advertiser and CONFIG_BT_PRIVACY
is enabled a Resolvable Private Address will be used. Use that
as responder address instead of the identity address to match what
the central sees.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
This test was turned off last weekend when a sensor misbehaved and broke
the CI, but that issue was resolved in #61016. This PR turns the test
back on.
For more info on what this test does, please see #60394.
For more context see also the comments under #60959
Signed-off-by: Tristan Honscheid <honscheid@google.com>
Some configurations have the system timer driver hardwired in.
Let's make them compatible with CONFIG_SYS_CLOCK_EXISTS=n.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
When timers are configured out, timepoint-based timeouts are reduced to
"no wait" or "wait forever" only.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Modify the NPCX driver erase method to allow 0x1000 byte size erases
along with 0x10000 byte size erases based on input parameters
Signed-off-by: Madhurima Paruchuri <mparuchuri@google.com>
This board has a single instance of EMAC connected to a NXP TJA1103
Ethernet PHY. Currently, there is no driver for this PHY and its
pin strapping configuration allows to use it without software
configuration, so EMAC is configured as fixed link.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
This device has a single instance of EMAC (a 100Mbps version of GMAC).
TCP/UDP checksum calculation is offloaded.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Add initial support for NXP S32 GMAC/EMAC:
- it's a copy-implementation with DMA data buffers and buffer
descriptors in non-cached memory (buf len and ring size configurable)
- PHY interface selection only implemented for S32K3 devices as it is
SoC-specific
- no PHY driver integration, it works as a fixed link with speed/duplex
configured through devicetree
- supports multicast hash filtering, promiscuous mode, MAC loopback
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Change the eth-phy definition so that the phy is pointed by a phandle
rather than a child node, make the phy device a child of mdio. This
makes more sense from a devicetree hirearchy where the phandles have to
be initialized before the device itself, allows keeping the priorities
in check with CHECK_INIT_PRIORITIES.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fix a build warning that is generated by new
enough compilers, when they detect the sprintf()
may overflow the destination buffer lenght.
The code which was generating the warnig was
actually not used, so we just remove it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This is a one-line fix for edtlib, which lets gen_defines.py indicate
whether the `ranges` property exists within a given node.
Although address translation through ranges is typically automatic,
users can choose to manually inspect ranges using DT_FOREACH_RANGE(),
DT_NUM_RANGES(), and other DT_RANGES_* macros. These can be used to
implement manual translation at runtime, which is currently done for
PCIe controllers.
The only thing missing is being able to check if a node contains an
empty `ranges;`, which signifies a 1:1 translation to the parent bus.
Checking DT_NUM_RANGES() is insufficient, because it returns zero
whether or not `ranges;` is present.
It should be possible to use DT_NODE_HAS_PROP(), but it was not working,
because edtlib ignores properties which are undeclared in bindings and
don't have a default type. Add a missing PropertySpec for `ranges` with
"compound" type; it can't be "array" because it can be empty-valued.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
The normative spec for `pthread_mutex_timedlock()` says that
it should return `ETIMEDOUT` when a timeout occurs. However,
currently it returns `EAGAIN`, which reflects what is returned
by `k_mutex_lock()`.
Inspect and update the return value to account for this slight
difference.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
The nRF HW models have been updated to include the following
fixes and improvements:
* TIMER: Add missing HAL function override
* TIMER: Added notes about minor differences
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable the possibility for boards to implement a custom `run` target in
its board.cmake to run any arbitrary commands. This is helpful for devs
who would like to add support for proprietary simulator to their boards
that can't be upstreamed.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The separate done memq was introduced to handle the old LLCP
stalling processing of the rx queue; This is no longer an issue with
the new LLCP, so we can remove it
Signed-off-by: Troels Nilsson <trnn@demant.com>
These testcases are not SMP-safe, will fail on all SMP boards. Simply
turning them to 1cpu test can not fix the issue.
So, setting CONFIG_MP_MAX_NUM_CPUS to 1 as a workaround.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
The test_trylock reuses the cpu1_thread, but there is no way for it to
exit. This will cause the thread created twice, as a result, two cpu
running the same thread simultaneously cause an unexpected crash.
Fix this by adding initialization of resources and also the exit for the
cpu1_thread.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
Add an additional option to the `append` schema for appending to the
`DTS_EXTRA_CPPFLAGS` cmake cache variable, enabling finer control over
the content of devicetree files.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Upon receiving a L2CAP PDU, only send credits back if the L2CAP channel
hasn't been disconnected. The recv() callback called from
l2cap_chan_le_recv() can trigger a disconnect, which would cause an
assert failure when attempting to send credits back.
Signed-off-by: Donatien Garnier <donatien.garnier@blecon.net>
The PPP TX thread handles the transmission of packets at PPP layer.
Make it's priority configurable, so it's priority can be configured higher
then higher protocol layers.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
The TCP work queue is handles all TCP transmission and maintenance tasks.
Make it's priority configurable, so it can be configured to a lower
priority than the lower level network layers to avoid it consuming all
net_bufs before handing over execution to the lower layer network layers.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
The nRF HW models have been updated to include the following
fixes and improvements:
* RADIO: Bugfix if DISABLE or STOP during first us of TxStart
* File opening: Create folders if missing
* TIMER: Completed, including all count functionality
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Drop a bunch of redundant `status = "okay"` entries. These have been
added in 613c32b03f together with few other tweaks, but are not really
needed as nodes are enabled by default.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Format the file `drivers/sensor/max17262/max17262.c` but exclude the
regsiter lookup table in `max17262_sample_fetch()`
Signed-off-by: Tristan Honscheid <honscheid@google.com>
