posix.common contains testsuites that can be separated into smaller
groups of tests. This change moves syslog into a singular
testsuite at tests/posix/xsi_system_logging app directory.
Signed-off-by: Marvin Ouma <pancakesdeath@protonmail.com>
Add a timeout to the `bme280_wait_until_ready` loop to ensure that we
never get stuck in this loop even if the bus enters an error condition.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Commit e2a32d8b0ca596afeae48739c43817f693720a88 introduced an unbound
cmd issue for jlink flashing.
Fixed by moving cmd assignment outside of condition.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Adding new CONFIG_MBEDTLS_PSA_KEY_SLOT_COUNT to select the number
of key slots in PSA Crypto core. The default value is 16. Be aware
that key slots consume RAM memory even if unused, so the proper value
should be a compromise between the number of slots required by
the application and the available RAM in the system.
This commit also:
- updates tests/crypto/secp256r1/mbedtls.conf to showcase how to
use this new symbol to reduce RAM footprint.
- tests/bsim/bluetooth/mesh/overlay_psa.conf to support all the
keys used in the test.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Adding the Kconfig symbol CONFIG_MBEDTLS_PSA_STATIC_KEY_SLOTS
to allow Mbed TLS's PSA Crypto core to use static key buffers
to store key's material. This helps reducing heap memory
usage and, potentially, it also discard code implementing
heap memory management if there's no other module in the build
that makes use of it.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Update the Mbed TLS revision so as to take in a patch which
allows to use static key slot buffers for the PSA Crypto core
instead of dynamic (i.e. heap based) ones.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Add a simple demonstration of the led_write_channels api on the lp5569
driver sample.
The demonstration simply turns on all of the channels with a single call to
led_write_channels. Then the same is done for turning off the channels.
Thus, it doesn't add much visually, but it shows the usage of the api.
Signed-off-by: Emil Dahl Juhl <emdj@bang-olufsen.dk>
The lp5569 has multiple pwm outputs, and thus implementing the
write_channels api to set multiple values in a single call makes sense.
Implement the write_channels function with a basic range check on the
channel range.
Since the lp5569 supports auto-increment, all of the channels can be
written in one i2c transfer, starting from the pwm register of the
start_channel.
Signed-off-by: Emil Dahl Juhl <emdj@bang-olufsen.dk>
The lp5569 controller supports auto-increment for its registers. This is by
default enabled in the chip, but the driver actively disabled it.
Since auto-increment is useful for writing multiple consecutive registers,
enable the feature. The driver, however, doesn't perform such consecutive
writes and thus the existing behavior is not altered.
Signed-off-by: Emil Dahl Juhl <emdj@bang-olufsen.dk>
k_thread_suspend() is an async API intended to stop any thread in any
state from any context. Some apps just want to use it to "suspend
myself", which is a much (!) simpler operation. Detect that specific
usage as a performance case.
Signed-off-by: Andy Ross <andyross@google.com>
This puts the syscall helpers into the vector code section, and
is a tiny TLB optimization. Before this, worst case scenario is
that there would 2 instruction TLB misses when both the syscall
helpers and the vector code pages are not in TLB cache. With
this change, there would be at most 1 instruction TLB miss as
now the syscall helper and the vector code (which includes
exception handling code and xtensa_do_syscall()) are now in
the same page, and the same TLB entry.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The B_L4S5I_IOT01A Discovery kit does not boot up when using --sysbuild.
The error is caused by slot0_partition which is assigned an address of
0x1000 which overlaps with the boot_partition. Setting the address to
0x10000 fixed it.
Signed-off-by: Winston Arrocena <we.arrocena@gmail.com>
This adds support for the single-vector trapping (SVT) model, defined by
SPARC-V8 Embedded (V8E) Architecture Specification. SVT is available in
most LEON processors.
With single-vector trapping enabled, all traps are vectored through a
single trap vector (TBR.A) rather than one 16-byte entry for each trap
type. This improves memory utilization because the full 4 KiB trap table
is not needed.
This implementation uses a two-level of lookup table to find the handler
for the trap type (0..255).
- Execution time is constant.
- Condition flags are preserved.
- The implementation footprint is 60 bytes .text and 284 bytes .rodata.
For comparison, a non-SVT table is always 4096 .text.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Added mikrobus_header, mikrobus_i2c, mikrobus_spi and mikrobus_serial
node labels to da14695_dk_usb device tree board definition, allowing
compatible shield boards to be used. Also fixed minor issues with
pin assignment and header labelling.
Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
Reducing the heap requirement for the hci_ipc sample from
8KiB to 4KiB. It has been tested in various configurations to
work with 2300, but 4KiB was used to provide some leeway for
future updates.
The heap requirement is not documented, and it is unclear why
values lower than 2300 (not exact number) won't boot, and should
be investigated further.
Memory has become a very scarce resource for especially the ISO
builds for the nRF5340, which is why this is getting reduced.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The SSP driver has odd dependency to outside definition of
CONFIG_INTEL_NM. This is in practise tied to SSP hardware
version and always enabled for SSP block version 1.0.
Use the new SSP_IP_VER define to replace the CONFIG_INTEL_MN
preprocssor checks. Also modify the board test case to
remove the obsolete config setting.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Use Kconfig to configure watchdog instead of using expensive filters.
Also disable CONFIG_TEST_HW_STACK_PROTECTION for this test so we do not
have to create special cases.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enabling CONFIG_FPU and CONFIG_FPU_SHARING requires the
definition of `arch_float_disable` and `arch_float_enable`.
Signed-off-by: Matthias Alleman <matthias.alleman@basalte.be>
This fixes memory corruption of delayable work when
tests executes unsupported function.
When test (e.g. only_rx_in_chunks) is executed it starts
delayed work for master functionality (with 10 ms delay).
Later when slave function is tried and reports that
function is unsupported, test is terminated (task ends)
but work is still scheduled.
When next test starts it clears work that is already
scheduled:
static void before(void *not_used)
{
ARG_UNUSED(not_used);
memset(&tdata, 0, sizeof(tdata));
this leads to memory corruption and system work queue
tries to remove work but it never does since head/next
pointers are zeroed at that time.
This just adds after function that cancels work
regardless if it was scheduled or not.
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
The blobs are now part of nrf_wifi module, and remove the manual check
and add verifying the blobs and their integrity using helper function.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The shim files should be part of the Zephyr module directory within
Zephyr, as they are coupled with the module implementation which os OS
agnostic.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Following the naming convention add an underscore and update path in the
maintainers file too.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Do not enable the video sw generator if a real camera is present. This
helps to save some spaces and to avoid unrelated code going
into the built image.
Signed-off-by: Trung Hieu Le <trunghieu.le@nxp.com>
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Most likely there is no point of synchronizing RTC if net core is
not enabled. Same for the bootloader.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
