The XCC toolchain may come with Clang front-end depending on
how it's built. Currently, the only SoC/board using XCC is
the intel_s1000_crb and its XCC toolchain comes with Clang
3.9.0 which has a lot better support for C99 and C++11 than
the portion based on GCC 4.2 (which does not even support
C++11). So this change attempts to use the Clang portion
instead of GCC if the Clang executable exists.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The undefined symbol option "-u" applies to linker so prefix
it with the linker prefix (usually "-Wl"). This fixes warnings
from LLVM/Clang about unknown arguments.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The usb_transport_init() does not return a value when it fails to
initialize the USB device. So add a return value there.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
XCC does not seem to handle if(IS_ENABLED()) well which means
XCC would not get rid of code even IS_ENABLED() is false.
In this case, sys_reboot() call in ztest is in this situation
so add a dummy version for ztest only.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
During LOG_*() macro expansions, XCC expands everything even though
IS_ENABLED() is used. This resulting in various log*() functions
(e.g. log_0(), log_1(), etc.) being required for linking. However,
when CONFIG_LOG_MINIMAL=y, those functions are not compiled from
the logging subsystem. Therefore, to get past the linking error,
dummy versions are being provided.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The newlib of XCC requires linking to _gettimeofday_r() which
should have been provided by its own C library, but obviously
isn't. So we need to provide a dummy version to get past
the build error.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Newer XCC versions wrap unsigned int with UINT32_C(x)
in their own macros. However, the #include chain
usually does not contain UINT32_C(x). To make matters
worse, including stdint.h (where UINT32_C is defined)
in toolchain/xcc.h would cause the linker script to
contain a bunch of typedef which are invalid for
linker scripts. So define UINT32_C(x) manually.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Providing 'tmp', which was never updated, resulted in removeal of
subscriptions from the beginning.
Using the updated 'prev' resolves this.
Signed-off-by: Marco Sterbik <madbadmax00@gmail.com>
Reorganize write_regs() to reuse more code for *_BASE_ADDRESS and
*_SIZE, and get rid of reg_addr_ident() and reg_size_ident().
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Start initiator immediately instead of scanning for device first.
If the host resolving list is used we need to go via scanner to resolve
the address.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Based on this commit
| commit dd6186f299
| Author: Bobby Noelte <b0661n0e17e@gmail.com>
| Date: Sat Sep 30 18:24:46 2017 +0200
|
| boards: nucleo_f030r8: reduce kernel memory usage
|
| nucleo_f030r8 fails in CI because applications need
| more RAM.
|
| Reduce kernel memory used by stacks and ISR vector table.
|
| Fixes#3923
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Capture the value of the volatile variable outside the assert and use
the captured value in the assert.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The rf2xx driver needs GPIO driver to works. The RST, SLPTR and INT
are mandatory signals and driver uses DT to configure them. This add
the GPIO dependency on Kconfig.rf2xx file.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Do not enable hardware accelerated checksum calculation by
default. It does not work for frdm-k64f and is causing
confusion among users.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A directive to compile the system call handlers for the
watchdog subsystem was omitted from CMakeLists.txt, causing
the handlers not to be compiled and some issues in the C
file undetected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When building with Kconfig a symbol CONFIG_FOO is either undefined, or
defined to the integer literal 1. There are styles and use cases
where this is important, e.g. using "#if (CONFIG_FOO - 0)" which would
not work with a macro expanding to the identifier y. Use the standard
default definition instead of a special non-default one.
Also consistently use space rather than tab indentation within the
multi-line setting, and alphabetize the CONFIG_ predefines.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Update sample.yaml file for ST7789v sample to also build with
st7789v_waveshare_240x240 shield.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Made the unnamed choice for ST7789V pixel formats named so that the
default value can be set in defconfig files.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Make sure we close the pipe file handles after we are done, otherwise we
will end up with too many open file descriptors and crash...
Fixes#20974Fixes#21637
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The original implementation left this function hidden in init.h which
prevented it from showing up in documentation. Move it to kernel.h,
and document it consistent with the other functions that allow caller
customization based on context.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This enables LiteX PRBS random number generator driver
for litex_vexriscv board.
Signed-off-by: Pawel Czarnecki <pczarnecki@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
This adds PRBS ranom number generator driver for
LiteX SoC builder with its bindings.
Signed-off-by: Pawel Czarnecki <pczarnecki@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
miv already had it defined, but let's shorten the names and use
them in the driver. This also adds it for sifive-freedom.
Signed-off-by: Olof Johansson <olof@lixom.net>
This is no longer needed, since all in-tree platforms are only using
the standard mstatus formats. Remove it to avoid the complexity.
Signed-off-by: Olof Johansson <olof@lixom.net>
Added Kconfig option to conditionally compile in HCI command
parameter validation code.
When building a combined host plus controller application,
only validations in the host at the top level close to the
API caller is sufficient.
The controller validations are included in controller only
builds.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable the NXP FTM PWM outputs in the board pinmux files based on the
DT_INST_* defines instead of CONFIG_PWM_* to match the pwm_mcux_ftm
driver.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename the NXP FTM instances in the KE1xF SoC to PWM to match the
other SoCs/boards using the FlexTimer as PWM generator.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Convert the NXP MCUX FTM driver to use the DT_INST_* defines instead
of a mix of CONFIG_PWM_* and dts fixups. This simplifies adding new
device tree properties to the ftm nodes.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Only emit a warning about changing PWM period for all channels of a
given FTM instance when changing the period from zero to
non-zero. This silences the useless warning issued at first FTM PWM
channel configuration.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
