What is changed?
Added config for Ethos-U85 and, the module `hal_ethos_u` now points
to the latest revision which has support for Arm Ethos-U85 NPU.
Why do we need this change?
This will help in validating the NPU when we add support for FVP
testing for Ethos-U85.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
There are 4 Kconfig names about the "Draw Buffer". Rename 'VBD' to 'VDB'
in Kconfig option 'LV_Z_*VBD*_CUSTOM_SECTION' to make name consistent.
config LV_Z_VDB_ALIGN
int "Rending buffer alignment"
config LV_Z_VBD_CUSTOM_SECTION
bool "Link rendering buffers to custom section"
config LV_Z_DOUBLE_VDB
bool "Use two rendering buffers"
config LV_Z_VDB_SIZE
int "Rendering buffer size"
default 100 if LV_Z_FULL_REFRESH
And the draw buffer definition is now:
static uint8_t buf0[BUFFER_SIZE]
#ifdef CONFIG_LV_Z_VDB_CUSTOM_SECTION
Z_GENERIC_SECTION(.lvgl_buf)
#endif
__aligned(CONFIG_LV_Z_VDB_ALIGN);
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Adds support for the NXP PXP engine. LVGL changed
the Kconfig symbol from LV_USE_GPU_NXP_PXP to
LV_USE_PXP, but hal_nxp still relies on
LV_USE_GPU_NXP_PXP, so add a temporary symbol for it.
Additionally the drawing engines need to invalidate
ranges in the dcache, the method needs to be provided
via a lvgl_support.h file.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
This patch adds the OSAL implementation of dynamic thread creation, mutex
and thread syncronization primitive (semaphore) enabling the use of the
parallel rendering architecture provided with LVGL 9.0. To use it, set
`CONFIG_LV_Z_USE_OSAL` and your preferred dynamic thread stack allocation
method (pool or heap).
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
This patch updates the module gluecode to be compatible with LVGL version
9.2. This includes changes done to display and input driver initialization
and draw buffer handling.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
The non-raw API has been removed from the nRF 802.15.4 Radio Driver.
There is no need to set NRF_802154_USE_RAW_API macro anymore in
CMakeLists.txt that integrates the driver.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
Despite having higher log buffer sizes the log messages are being
dropped due to high rate (and longer messages) as hostap debugging is
very verbose, so, use "immediate" logging by default. As hostap is only
for control path this will not have impact on timing.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
As kernel heap is used for hostap, which replaced libc heap, then no
need to consider the MBEDTLS_ENABLE_HEAP case. For enterprise case,
mbedtls will use MBEDTLS_HEAP or libc heap to allocate memory, instead
of the kernel heap.
Modify the heap size for enterprise case to have necessary memory.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
The LIS2DUXS12 is a smart, digital, 3-axis linear accelerometer whose
MEMS and ASIC have been expressly designed to combine the lowest current
consumption possible with features such as always-on antialiasing
filtering, a finite state machine (FSM) and machine learning core (MLC)
with adaptive self-configuration (ASC), and an analog hub / Qvar sensing
channel.
(https://www.st.com/en/mems-and-sensors/lis2duxs12.html)
Signed-off-by: Armando Visconti <armando.visconti@st.com>
For TFM example, MBEDTLS_PSA_CRYPTO_C has some dependencies and may not
be enabled, so use 'imply' instead of 'select' here for hostap
MBEDTLS_PSA case.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
It will be have a relative high probability to get continuous memory
for the next enterprise conenction, if free station certs memory
during disconnect, thus sys_heap need less memory for big size
EAP-TLS server cert packet, otherwise more memory space needed.
Signed-off-by: Rex Chen <rex.chen_1@nxp.com>
Add empty function stubs to support building with the newly introduced
CONFIG_BUILD_ONLY_NO_BLOBS option.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Unlike the RP2040, the RP2350 has multiple tick generators that need to
be started. Start TIMER0 and TIMER1 tick generators during
clock_control_init.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
RP2350 is Raspberry Pi's newest SoC. From the datasheet:
"RP2350 is a new family of microcontrollers from Raspberry Pi that
offers significant enhancements over RP2040. Key features include:
• Dual Cortex-M33 or Hazard3 processors at 150 MHz
• 520 kB on-chip SRAM, in 10 independent banks
• 8 kB of one-time-programmable storage (OTP)
• Up to 16 MB of external QSPI flash/PSRAM via dedicated QSPI bus
...
"
This commit introduces some changes to support the existing RP2040 and
what is describe by Raspberry Pi as the "RP2350 family". Currently there
are 4 published products in the family: RP2350A, RP2350B, RP2354A, and
RP2354A. Within Zephyr's taxonomy, split the configuration as follows:
Family: Raspberry Pi Pico. This contains all RP2XXX SoCs,
SoC Series: RP2040 and RP2350.
SoC: RP2040 and, for now, just the RP2350A, which is present on the Pico
2, where the A suffix indicates QFN-60 package type. This structure is
reflected in `soc/raspberrypi/soc.yml`, and somewhat assumes that there
won't be a RP2050, for example, as a RP2040 with more RAM.
This is foundation work ahead of introducing support for Raspberry Pi's
Pico 2 board, which is fitted with a RP2350A and 4MB of flash.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
In Kconfig, already check both dpp and enterprise mode for enable
NO_CONFIG_BLOBS, so remove the wrong one in the cmakelist.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Strong entropy/random sources are a must to get secure crypto algorithms,
but sometimes its useful to allow non-CS sources as well for sake of
test purposes. MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG_ALLOW_NON_CSPRNG was
designed exactly for this scope, but recently also TEST_CSPRNG_GENERATOR
was added and it acts similarly:
- MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG_ALLOW_NON_CSPRNG operates in
"zephyr/modules/mbedtls/zephyr_entropy.c" allowing
mbedtls_psa_external_get_random() to try both sys_csrand_get() first
and then sys_rand_get() as fallback.
- TEST_CSPRNG_GENERATOR instead operates in
"zephyr/subsys/random/random_test_csprng.c" and it basically wraps
the call to sys_csrand_get() with a call to sys_rand_get().
Albeit they operate at different level, the result is identical, so
Mbed TLS should support both of them when MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG
is set and there is no CSPRNG_ENABLED.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This is based on the introduction of a helper Kconfig symbol in
"subsys/random/Kconfig" which is named CSPRNG_AVAILABLE. When this is
enabled it means that there is a "zephyr,entropy" property defined in the
device-tree, therefore Mbed TLS can select ENTROPY_GENERATOR to allow
the platform specific driver to be included into the build.
This commit also changes other locations where CSPRNG_ENABLED was used
moving it to CSPRNG_AVAILABLE in order to solve dependency loop
build failures.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The CONFIG_ZEPHYR_HAL_TDK_MODULE is always set if the module is on disk,
introduce an implied symbol to prevent a cmake warning if no TDK drivers
are needed.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
As per BHC-750 in TCAT case for now only allowed devices
are the ones that have either dual radio or multiplexed
radio capabilities. So the 'M' bit in BLE advertisement
should be always set to 1. In future specifications
devices without multiradio capabilities will be allowed
this is the reason why new Kconfig was introduced.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
Convert vendor specific **_WIFI_BUILD_ONLY_MODE symbol as global
in order to provide common build flag to enable CI with no blobs.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
At the present time, Zephyr does has overlap between sleeping and
suspending. Not only should sleeping and suspended be orthogonal
states, but we should ensure users always employ the correct API.
For example, to wake a sleeping thread, k_wakeup() should be used,
and to resume a suspended thread, k_thread_resume() should be used.
However, at the present time k_thread_resume() can be used on a
thread that called k_sleep(K_FOREVER). Sleeping should have nothing
to do with suspension.
This commit introduces the new _THREAD_SLEEPING thread state along
with some prep-work to facilitate the decoupling of the sleeping and
suspended thread states.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Update SystemCoreClock to match current core frequency. This MDK
variable is used by nrfx_coredep_delay_us which performs busy
waiting and is used by k_busy_wait.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add the ability to select littlefs disk version
to maintain backward compatibility
with existing littlefs
with the same major disk version.
Signed-off-by: Mikhail Siomin <victorovich.01@mail.ru>
In zephyr_hostapd_init, calls net_if_get_wifi_sap to get the SAP iface,
it means mgd iface of SAP type is registered before zephyr_hostapd_init.
Actually the mgd iface of SAP should be called in iface_api.init phase.
Therefore, remove unnecessary register of mgd iface in hostapd init.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
There are currently four types of roaming, 11r roaming, 11v roaming, 11k
roaming and legacy roaming, The priority of the roaming mode is
11r-->11v-->11k-->legacy roaming. If the ap does not support 11r/11v/11k
roaming, we will use legacy roaming. legecy roaming needs to do
full channel scan, which is the same as the general scan connection
process, so the legacy roaming time will be longer.
Signed-off-by: Gaofeng Zhang <gaofeng.zhang@nxp.com>
PSA_WANT_KEY_TYPE_xxx_KEY_PAIR_BASIC build symbols are automatically
enabled in Mbed TLS header files whenever any key pair feature between
IMPORT,EXPORT, GENERATE,DERIVE is set. So we mimic the same behavior with
Kconfig symbols:
- do not add BASIC to the automatic generated Kconfig file;
- let BASIC be auto-enabled as soon as any other feature (IMPORT,EXPORT,
GENERATE,DERIVE) is enabled for the same key type.
The 2nd point is achieved by adding a new Kconfig file which is meant
to hold the logic between PSA_WANT symbols. This is necessary because
Kconfig.psa is automatically generated.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Commit adds `diag transmit` used for transmission IEEE802154 packets
in specific amount and interval.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
