First commit to support serial driver running on r_sci_uart for Renesas
RA devices.
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
Background of this modification is to make gpio driver code
provided by Renesas vendor to be an official support for Renesas
MCU on Zephyr
Signed-off-by: Quy Tran <quy.tran.pz@renesas.com>
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
Update pinctrl driver which used for Renesas RA series with
PFS secure register
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
Signed-off-by: Quy Tran <quy.tran.pz@renesas.com>
Implements the driver for the OLED SSD1327 controller.
This driver is based on the ssd1306 driver due to their similarities.
Only the SPI control bus is supported.
Signed-off-by: Luc BEAUFILS <luc.beaufils@savoirfairelinux.com>
This commit add the description of the fmc in the SoC stm32l5, and the
description of the screen controller st7789v in the board stm32l562e-dk.
Signed-off-by: Miguel Gazquez <miguel.gazquez@bootlin.com>
Add support of sys_poweroff API on m2l31x series.
It could support SPD0~2 standby or DPD0~1 deep power down mode.
Signed-off-by: cyliang tw <cyliang@nuvoton.com>
The offset of the peripheral is abstracted so that
the peripheral can be defined in RT118x.dtsi,that
is a common dtsi file for RT1180.
Due to cm33 core, add ns/s files which are served
on different status for cm33 core.
Add rt118x_cm7 dtsi file
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
Now that the dts/bindings filter has been removed from
Devicetree Binding area, this area serves no real purpose.
Move the include/dt-bindings files to their respective areas.
Fix some of the orphaned dts/bindings paths.
Add regex filter for any binding with "zephyr" in the name to be
in the devicetree area.
Fix the imx_spc.h file being in it's own pm/ folder instead of
power/ like the other power related headers.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
accelerometer range is not suffixed with 'G' in the header
and also in the usages, but bindings use with suffix 'G'.
remove the suffix 'G' to have same reference.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Relocate common properties from dedicated SOC's related
Cortex-M SysTick DTS files into the new generic
'cortex-m-systick.yaml' one.
Signed-off-by: Andrey VOLKOV <andrey.volkov@munic.io>
Initial commit to suppor RA8D1 SoC
This is deveop base on RA8M1 so it will have similar stucture and
feature
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
Add RTC driver support for NXP frdm_ke17z512, rtc doesn't exist on
frdm_ke17z board, delete rtc node from its dtsi file.
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
Set LPO 1KHZ clock for RTC if clock source 'LPO' is selected.
The frdm_ke17z512 has no 32KHZ OSC, the RTC clock comes from SOSC,
RTC_CLKIN, LPO 1KHZ. But usually the SOSC is connected with 8MHZ
oscilator, so only 1kHZ LPO is usable.
Update the nxp,kinetis-rtc.yaml to select RTC clock source.
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
Instead of forcing users to provide this setting, allow to describe
which signals require CLOCKPIN enablement at device nodes. This is later
captured by the pinctrl macros and applied in the pinctrl driver. Note
that name has been adjusted to nordic,clockpin-enable to avoid confusion
with clock related settings.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Enabled ENET ethernet port on Cortex-A Core for imx8mn EVK board.
Updated document for supported features.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
