Enable advertiser main to support relay messages, this maximizes
theutilization efficiency of advertising sets, which is helpful for the
sending of dense relays, but for Friend and LPN, it delays the sending
of local messages a little, this may cause the time slot deviation between
friend and lpn, and the power consumption of lpn will increase.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
For Mesh Message, should only process by model layer when dst
is unicast address of this nodes or model subscrip on.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
The default number of buffers (contexts) for locally initiated
procedures was 4. Per default the host initiates 3 procedures
when opening a connection, allowing the application to initiate
only 1 additional procedure in parallel.
This commit increases the default to 6, if auto phy-update and
dle is enabled, increasing the robustness for an application.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
mcc.c does not include `conn_internal.h` so it does not
know the `bt_conn` struct, causing logging issues when
trying to log a `bt_conn` pointer.
Fixed by casting the `conn` pointers to `(void *)`.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
One of the notification callback functions did not properly
get the `read_params` pointer, causing an invalid result of
CONTAINER_OF as it would use a NULL pointer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Call the RPA expired callback on advertising sets even when they are
not enabled.
The RPA expired callback will now be called on advertising sets
when the BT_ADV_RPA_VALID flag is cleared for the set.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix RPA timeout expiration when BT_EXT_ADV has been enabled.
Always invalidate the device RPA on RPA timeout.
This RPA is used by the scan roles, and the advertiser that was started
using the bt_le_adv_start API.
Call the RPA expire callback only on advertising sets that are enabled
and not being limited by a timeout and not using the identity address.
On RPA timeout always invalidate the RPA of advertising sets that are
disabled.
Fixes: #51208Fixes: #51228Fixes: #51247
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add shell support for RPA expire callback.
This prints a message when the callback is called on the specific
advertising set.
Add a command to control the return value of this callback for a
specific advertising set.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
- Add CIS Create policy config choices
- Implemented CIS Central in ULL following proposed setup/commit flow
- Full support for HCI_LE_Set_CIG_Parameters_Test
- Extend ull_conn_iso_start and ull_conn_iso_ticker_cb to handle
central role
- Partial support for HCI_LE_Set_CIG_Parameters. TODOs:
* Drop suggested retransmissions if Max_Transmission_Latency is
exceeded
* Calculate ISO interval based on policy
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix issues with referencing invalid netbuf data and add missing
parameter. Removed returning of handle in setup functions, as handles
are not available until commit.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Move ull_peripheral_iso_start ull_peripheral_iso_ticker_cb to
ull_conn_iso, to share code between CIS peripheral and central.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Local procedure for CIS central establishment. Calls yet unimplemented
functions in ull_central. Changes are guarded by
CONFIG_BT_CTLR_CENTRAL_ISO.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Replace the BT_CTLR_ADVANCED_SCHEDULING_CENTRAL_CONN_SPACING
Kconfig with BT_CTLR_CENTRAL_SPACING to configure the
the spacing from the beginning of a central connection event
to beginning of the next central connection when supporting
multiple simulataneous central connections.
If the BT_CTLR_CENTRAL_SPACING in microseconds is smaller
then the required time reservation for a connection event,
for given maximum data length and PHY in use, then the
calculated time reservation will be used as the spacing
between consecution central connection events.
The change fixes an issue wherein use of old Kconfig with
higher values causes new central connections to be placed
in between already connected central role if there was
free time space available to fit the new connections time
reservation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When application uses multiple identities mesh stack keeps reacting
on connection events not related to the own identity (BT_ID_DEFAULT)
causing it to trigger additional advertising and this leads to errors.
Though not harmful, this also leads to mesh stack counting connections
wrongly and consuming internal resources.
This commit fixes the issue described above by checking the
connection id before proceeding further.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Explicitly set all bits of used radio registers when
configuring radio events, removing the dependency on having
the power-on reset value and removing the need to ensuring
power-on reset values being set in the radio peripheral.
This will ensure the Controller has radio register value
correctly configured irrespective of changes across SoCs'
radio register power-on reset values.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
strcpy copies string including terminating null character.
strlen returns length without terminating null symbol.
If oob string is 16 bytes length then strcpy will corrupt byte
after auth array.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The sample in the Provisioning protocol spec chapter
is in big endian. Static OOB value should append
zeroes on the little endian platforms.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Rename BASS to BAP Scan Delegator and BASS Client
to BAP Broadcast Assistant. This is the first step towards
integrating the BASS with the rest of BAP.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In file `subsys/bluetooth/mesh/net.c`:
renamed `loopback` to `net_loopback`.
In file `subsys/bluetooth/host/settings.c`:
Renamed `set` to `set_setting` and `commit` to `commit_settings`.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Removes the global cur_mcs_inst and replace it
with lookup functionality.
This fixes an issue with bt_mcc_discover_mcs not being able
to be called more than once, as well
as streamline the implementation significantly.
This is also the first step towards not only supporting
multipe MCS instances for a single device, but also a
step towards handling multiple devices.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
It was possible that on re-connect, the MCC implementation
would receive notifications when cur_mcs_inst was NULL.
This is partially caused by a bug in gatt.c, but can
and should also be handled in MCC.
This commit ensures that we do not compare handles
on notifications with a NULL instance.
This commit also ensures that subscribe_mcs_char_func
is not called outside the context of the discovery
procedure by setting the subscribe callback
to NULL.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If adv stop was called form connected callback,
it would continue and unref the wrong conn object
if there where 2 connectable advertisers running,
but with only one 1 id configured.
Fixes#52196
Signed-off-by: Martin Tverdal <martin.tverdal@nordicsemi.no>
Fix advertising set's is_enabled flag to be reset when
connection complete is dequeued for connectable advertising
started using legacy advertising enable HCI commands. And
reset the is_enabled flag when advertising set terminated
is dequeued for connectable advertising enabled using
Extended Advertising HCI commands.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticks difference calculation to determine delayed
prepare callback. Without the use of masking by
ticker_ticks_diff_get, the diff value can be higher than
the supported 24-bit value. i.e. ticker_ticks_now_get()
rolls over in 24-bit value, whereas ticks_at_event is
free running value of 32-bits.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add long control PDU size support, also the implementation
now allocates control PDU size restricted to the supported
biggest control PDU that is enabled in the application
build. Features that are covered based on the increasing
control PDU sizes are ClearText connections, Encrypted
Connections, Connection Parameter Request support and
Create CIS control Procedure (Connected Central ISO)
support.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
After merging #51809, a few things were spotted that needed tweaking.
Among them:
- Rename the folder from bt_crypto to crypto, since the prefix is
unnecesary
- Remove the include folder
- Remove the path from the global include paths
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
-- Handle time calculations across the point at which the controller's
time information from the controller's clock will wrap (in the
microsecond range)
-- Use wrapped time in all ISO-AL time calculations
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Add to the cryptographic toolbox the h8 function, defined in the Bluetooth
Core Vol. 6, part E 1.1.1.
Also add test and SMP self test for this function. The data used for those
are from the Bluetooth Core.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Move functions defined in the Cryptographic toolbox of the Bluetooth
specification inside their own files in the following folder:
`zephyr/subsys/bluetooth/bt_crypto`. The functions were previously
implemented in `zephyr/subsys/bluetooth/host/smp.c`.
The cryptographic toolbox functions can now be accessed from outside of the
host.
In addition to that, tests for each cryptographic toolbox functions have
been added.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
When a BIS disconnected, we removed the references between
the endpoint and the stream. This made it impossible
to later unbind the audio_iso when
broadcast_sink_cleanup_streams was called.
Fixed by unbind the audio_iso when we remove the reference.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adding support for allowing user extension code to support deferring
anchor point moves. Refactored LLCP only.
Note: This is NOT supported by LEGACY LLCP impl.
KConfig'd by BT_CTLR_USER_CPR_ANCHOR_POINT_MOVE
Modified ll_conn_update API, to accommodate passing offsets
Modified CPR/CU context data structure
Modified CPR/CU procedure to handle anchor point move wait state
Fixed up unit tests, adding anchor point move cases to CPR/CU test
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Using a macro instead of repeated identical code for validation
Use macro for pdu length field encoding
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Instead of guarding all BT ISO data log statements with
CONFIG_BT_DEBUG_ISO_DATA, a new macro, BT_ISO_DATA_DBG, is
implemented to handle the guarding.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Guard additional debug statements in ISO that deals
with TX/RX with CONFIG_BT_DEBUG_ISO_DATA to avoid spamming
the log.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
bt_eatt_init currently registers a l2cap server, however should not
register a new one if it has already been registered - for example in
bt_enable previously.
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
Init bt_workq in bt_enable so it can be safely disabled.
Cancel rpa_update work upon disable as it is no longer required.
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
Add bt_pub_key_hci_disrupted function for when hci is disrupted during
a pub key hci command, to clear callbacks and BT_DEV_PUB_KEY_BUSY flag.
Call this from bt_disable for the case bt_disable disrupts the pub key
hci command.
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
Reset disconnected handles as is no longer needed after disable.
Created a destroy function to clear all connection states and cancel any
deferred work.
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
Reset the adv_pool in disable so that advertising can be started after
re-enabling without issue.
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
In bt_att_init, bt_conn_init and bt_l2cap_init, init the fifos and
slists before use. This means that they can be used after disable
without memory leakage.
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
