For a zero-length transfer, the STOP task is not triggered
automatically by the shortcut with the event that signals
the transfer end because such event is not generated.
Trigger this task "manually" to prevent the driver getting
stuck after the address byte is acknowledged.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
These changes turn out to have been incompatible with the way pinctrl
drivers are going to work, so we need to go back to what we had before
until we can agree on a better approach.
Squash of the following reverts:
Revert "boards: nrf: fix deprecated I2C properties"
This reverts commit 2a4ac9ac02.
Revert "samples: switch nrf overlays to sda-gpios, scl-gpios"
This reverts commit 01bb08e7d8.
Revert "boards: nrf: switch to sda-gpios, scl-gpios"
This reverts commit 17a66304c4.
Revert "i2c: nordic: switch to phandle arrays for pinmux"
This reverts commit 821c03a14a.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Deprecate the scl-pin and sda-pin properties in the devicetree.
Provide new scl-gpios and sda-gpios properties instead.
This lets the user specify SCL and SDA like this:
&i2c0 {
scl-gpios = <&gpio0 1 0>;
sda-gpios = <&gpio1 4 0>;
};
Instead of having to use:
&i2c0 {
scl-pin = <1>;
sda-pin = <36>;
};
Provide error checking and understandable error messages for invalid
configurations.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the devicetree node as the source of object name and other
information used when defining the device structure.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
These are all the case that coccinelle cannot find as they are inside
macro declarations.
Fixed via:
git grep -rlz -E "\(struct device \*" |
xargs -0 sed -i 's/(struct device/(const struct device/g'
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In all of these drivers, passing the device's data was sufficient as
only the data is being used by the HAL callback function then.
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As a general rule devicetree properties should correspond to hardware
description or configuration. In cases where a Zephyr driver receives
instance-specific configuration data from a devicetree property that
property should be marked as being Zephyr-specific. Rename
concat-buf-size to zephyr,concat-buf-size to follow this guideline.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The Nordic TWIM peripheral generates a start condition for each bus
transaction. Devices such as the SSD1306 display and some NXP sensors
can only tolerate the presence of a start condition and device address
after a stop condition. Those devices will not operate correctly when
these signals are observed while the bus is already active. This
motivated the addition of a RAM buffer into which message fragments
could be collected so TWIM can transmit them without injecting
unnecessary start conditions.
However many I2C devices interpret these signals as a repeated start
and ignore them and so function properly without a buffer
concatenating the message fragments.
There is no default for the concat-buf-size property, and the previous
strict requirement for one when performing scatter/gather I/O
transactions broke working drivers for devices that tolerate the
repeated starts. Allow those drivers to work by respecting the
property description and attempting to concatenate messages only if a
buffer in which to place them has been provided.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The condition of being either the last message or not concatenable to
the next message is the inverse of the condition of committing to
concatenate the next message. The latter is arguably easier to
understand. Reverse the logic, document the conditions, and simplify
the early continue.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Do the normal post-transfer shutdown and sync management when a
transaction is rejected due to insufficient buffer size rather than
returning with the peripheral left enabled and the transfer lock held.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The original checked only the current message length against the
buffer size, not accounting for space already used.
Also improve the diagnostic to indicate how much space is required vs
given.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The 100 ms hard-coded timeout is too small to complete the transfer of
1025 bytes of SSD1306 data at 100 kHz. Increase it to 500 ms to match
STM32 policy and fix this problem.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add option to concatenate i2c transfers. If concatenation buffer size is
provided then transfers will be concatenated as long as there is space
left in buffer.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Remove K_FOREVER wait on completion_sync.
In some situations (a short on I2C SDA line for example), this
semaphore will never be released and therefore we should not wait
it forever.
Instead we wait for a maximum of 100msec and return an error if we
weren't able to retrieve the semaphore.
In such situation, the program is not stuck anymore, but the I2C
driver must be uninit then init again to work again.
Fixes#25076.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Calling device_set_power_state() with DEVICE_PM_SUSPEND_STATE then
DEVICE_PM_OFF_STATE creates an assert in nrf driver
Signed-off-by: Ismael Fillonneau <ismael.fillonneau@stimio.fr>
This reverts commit 8739517107.
Pull Request #23437 was merged by mistake with an invalid manifest.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Update hal_nordic's revision, so that NRFX_ASSERT uses __ASSERT_NO_MSG
directly, not through the assert macro that comes from from libc,
as the definition of the latter might be different when some specific
libc version is used, and this could generate troubles.
Replace also uses of assert() with __ASSERT_NO_MSG() in nrfx driver
shims that use this macro without including the corresponding header
file (i.e. that implicitly rely on assert.h being included from
nrfx_glue.h, which is no longer the case).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit introduces separate "compatible" strings for dts nodes
representing different types of Nordic TWI peripherals. Previously
"nordic,nrf-i2c" was used for both TWI and TWIM, and TWIS was not
supported.
Quite a few files need to be touched by this commit but the changes can
be divided into groups of related or very similar ones, distinguishable
by the initial part of the path to the modified file:
* dts/bindings/i2c/
new bindings for "nordic,nrf-twim" and "nordic,nrf-twis" are added
and the one for "nordic,nrf-i2s" is renamed to "nordic,nrf-twi",
common fields for all these bindings are extracted to a shared file
* dts/arm/nordic/
"compatible" properties in i2cX nodes are updated (when there is no
choice as only one type of TWI peripheral is available) or replaced
with a comment pointing out that the proper type of peripheral needs
to be picked at some upper layer
* drivers/i2c/
both flavors of i2c_nrfx drivers are updated with the new names of
macros generated from dts
* boards/
all i2cX nodes in dts files for boards equipped with an nRF chip are
updated with the proper "compatible" property, according to the type
of TWI peripheral that is currently selected for the board by the
corresponding Kconfig choice option (I2C_x_NRF_TWI*)
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
TWI and TWIM used single static variable for multiple instances.
It would cause problems in case of multiple instances of peripheral.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
move i2c.h to drivers/i2c.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The defines should have had a _0 on them, now that we generate the
proper defines, fixup the cases that used that old scheme.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
I2C transfers could simultaneous be called that would
cause an inconsistent state in NRFX I2C state (and HW).
The NRFX TWI driver would expect to be in state
`NRFX_DRV_STATE_INITIALIZED` while being in state
`NRFX_DRV_STATE_POWERED_ON`.
Signed-off-by: Olivier Martin <olivier.martin@proglove.de>
When running sanitycheck for reel_board which selects
CONFIG_NRFX_TWIM it fails the following tests:
tests/misc/test_build/test_newlib
tests/kernel/errno/kernel.common.errno.newlib
tests/lib/mem_alloc/libraries.libc.newlib
/zephyr/drivers/i2c/i2c_nrfx_twim.c:144:3: error: expected declaration
specifiers or '...' before '(' token
(bitrate == I2C_BITRATE_STANDARD ? NRF_TWIM_FREQ_100K \
^
/zephyr/drivers/i2c/i2c_nrfx_twim.c:151:3: note: in expansion of macro
'I2C_NRFX_TWIM_FREQUENCY'
I2C_NRFX_TWIM_FREQUENCY( \
^~~~~~~~~~~~~~~~~~~~~~~
/zephyr/drivers/i2c/i2c_nrfx_twim.c:184:1: note: in expansion of macro
'I2C_NRFX_TWIM_DEVICE'
I2C_NRFX_TWIM_DEVICE(0);
^~~~~~~~~~~~~~~~~~~~
/zephyr/drivers/i2c/i2c_nrfx_twim.c:154:3: error: expected declaration
specifiers or '...' before string constant
"Wrong I2C " #idx " frequency setting in dts"); \
^
/zephyr/drivers/i2c/i2c_nrfx_twim.c:184:1: note: in expansion of macro
'I2C_NRFX_TWIM_DEVICE'
I2C_NRFX_TWIM_DEVICE(0);
^~~~~~~~~~~~~~~~~~~~
zephyr/drivers/i2c/CMakeFiles/drivers__i2c.dir/build.make:62: recipe
for target
'zephyr/drivers/i2c/CMakeFiles/drivers__i2c.dir/i2c_nrfx_twim.c.obj'
failed
To fix this, let's replace the use of static_assert() with a more
generic macro: BUILD_ASSERT_MSG() This should work across minimal
libc, newlibc and c++.
Signed-off-by: Michael Scott <mike@foundries.io>
Current implementation had fixed initial speed, this commit
fixes TWI and TWIM shims to use configuration from DTS.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
The majority of cases of CONFIG_I2C_x_IRQ_PRI should be
DT_I2C_x_IRQ_PRI. So go ahead and fix them up. Only the i2c_nios
driver still uses Kconfig for getting priority.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
10 bit addressing is still not supported on nrf chips, but now
I2C_MSG_ADDR_10_BITS flag is checked.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
SDA and SCL pins can now be configured through DTS.
Pins on development kits have been assigned according to arduino
headers.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Changes add a translation layer to make nrfx TWI and TWIM drivers
work with Zephyr API.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
