Commit graph

13 commits

Author SHA1 Message Date
Pawel Dunaj
cb01d097af ext: hal: nordic: Enable building of NRFX QDEC
Allow project to use Nordic's NRFX QDEC driver.

This closes issue #9364

Jira:DESK-259

Signed-off-by: Pawel Dunaj <pawel.dunaj@nordicsemi.no>
2018-10-17 13:45:51 -05:00
Paweł Zadrożniak
0a3f6f0a58 ext: hal: nordic: Add kconfig / CMakeLists entries for nrfx_usbd
Adds entries for USBD driver (nrfx_usbd) for kconfig / CMake.
Updates nrf52840 configuration header to enable USBD.

Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
2018-10-12 13:14:12 +02:00
Kamil Piszczek
add09c72ee ext: hal: nrfx: adding nfct driver to Kconfig
Added configuration option for NFCT driver to Kconfig.

Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
2018-10-02 14:05:27 -07:00
Kamil Piszczek
21bfea667e ext: hal: nrfx: adding timer driver to Kconfig
Added configuration option for TIMER driver to Kconfig.

Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
2018-10-02 14:05:27 -07:00
Kamil Piszczek
307a84771a ext: hal: nrfx: adding clock driver to Kconfig
Added configuration option for CLOCK driver to Kconfig.

Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
2018-10-02 14:05:27 -07:00
Carles Cufi
f0df45dd5b ext: hal: nordic: nrfx: Add nRF52810 configuration
nrfx requires specific chip configuration for each IC. Those are not
upstream in the nrfx repository, but rather part of the Zephyr nrfx
port. Add a configuration for the nRF52810.

Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <ioannis.glaropoulos@nordicsemi.no>
2018-06-25 19:34:33 +02:00
Andrzej Głąbek
13eba3970d ext: nordic: Correct CMakeLists.txt
This corrects two things:
- moves addition of the proper "system_*.c" file to sources, so that it
  is done only when CONFIG_HAS_NRFX is active (related CONFIG_SOC_* may
  be activated also for simulated targets which do not want to compile
  code with system initialization for the real SoC)
- removes redundant check of HAS_NRFX when adding "nrfx_glue.c"

Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-06-22 12:34:10 +02:00
Andrzej Głąbek
687355c9af arch: arm: nrf: Use SystemInit() from MDK in SoC initialization
Replace code that handles erratas and performs other SoC-specific
initialization, that was actually copied from SystemInit() provided
in MDK for particular SoCs, with a call to SystemInit().

Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-06-19 14:25:39 +02:00
Andrzej Głąbek
ea1d14e529 hal: nordic: Move nrfx IRQ related stuff from SPI shim to nrfx_glue
The simple function that helps to integrate nrfx IRQ handlers with
the IRQ_CONNECT macro can be used in shims for various nrfx drivers,
not only the SPI one.
Similarly, the macro for getting the IRQ number from the peripheral
base address needs to be widely available. It should be even moved
to <nrfx_common.h> in some next nrfx update.

Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-04-12 14:19:53 -04:00
Andrzej Głąbek
00397c65bc drivers: spi: Add shim for nrfx SPI driver
This adds a translation layer to make the nrfx driver for the legacy
(i.e. without EasyDMA) nRF SPI peripheral accessible via the updated
Zephyr's API of the SPI driver.
Configuration files are already prepared for adding support for SPIM
(Master with EasyDMA) and SPIS (Slave with EasyDMA) peripherals.

Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-04-04 19:02:35 +02:00
Michał Kruszewski
aee2ff526d ext: nordic: Replace HAL and MDK with the ones from nrfx
The old HAL and MDK have been removed from the source tree.
Since RADIO HAL is not yet present in nrfx, the "nrf_radio.h" file
was temporarily moved to "nrfx/hal" folder. It will be replaced with
the proper file from nrfx in its next update.

Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-01-29 03:02:06 +05:30
Andrzej Głąbek
c84c2eaa82 ext: nordic: Add initial adaptation layer for nrfx
This commit adds a glue layer that adapts nrfx to be usable in Zephyr
as a host environment and files with static configuration of nrfx
drivers for several supported SoCs.

Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-01-29 03:02:06 +05:30
Sebastian Bøe
12f8f76165 Introduce cmake-based rewrite of KBuild
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.

Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.

This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.

For users that just want to continue their work with minimal
disruption the following should suffice:

Install CMake 3.8.2+

Port any out-of-tree Makefiles to CMake.

Learn the absolute minimum about the new command line interface:

$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..

$ cd build
$ make

PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html

Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-11-08 20:00:22 -05:00