Add rng definition to f410.
Though, don't inherit directly in f412 as it's integrated
in a different way.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In order to ease description of DCKCFG regsiters,
make f412 a variant of f410 as it supposed to be.
Only exception is missing DAC1.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
As we have to provide LL addresses in big endian to userspace to be
POSIX compliant and we also do not want to reserve extra space for
such addresses, bff6a5cce5 introduced
a change that swaps address bytes in place in the packet before
returning the packet with LL address pointers to userspace.
Unfortunately a regression sneaked into the code base while doing
so: The byte swapping was duplicated when using 6LoWPAN compression
and the byte swapping caused decryption to fail in some cases,
see #53630. This commit fixes the problem.
Fixes: #53630
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
The L2 networking layer checks for return value from enable, but
Ethernet is not checking and always returns 0, so, relay the return
value from the Ethernet driver to networking stack.
This fixes the issue of interface start failing but interface still
being up.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
This add storage abstraction to allow switch between different flash
APIs. This remove the erase command at updatehub core and move it to
storage init phase.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Currently MCUboot and system reset are invoked directly in the sample
applicatiion. This introduce 2 new methods to isolate system from
application.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Move header includes to source file. Currently firmware source files
have a hardcode partition identificator. This moves identificators
to updatehub core.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The CP app sends PD a "command" and the PD responds to it. Some times,
the PD has something that it wants to tell the PD which it does so in
response to POLL command. Both CP and PD apps need a way to exchange
these info over the OSDP bus. To archive this we will introduce what are
called "events" that allow the PD app to enqueue and CP app to get
notified.
This is analogous to the incumbent "commands" abstraction where, the CP
app enqueues a command and the PD app gets notified of it.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
For all commands and replies, the buffer length needed to build or the
length of data needed to decode needs to be checked and asserted. Right now
we do this by ad-hoc if-s. Add macros that do this at a common location.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
The raw, flags check has become a bit excessive and has begun to affect
code readability. Provide inline functions for those accesses that are
frequent. Also, get rid of `struct osdp_cp` as it can be fully represented
by `struct osdp` itself.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
CP has an array of PDs and pd->offset was the position of the PD in CP's
list. Since offset has many meanings, rename it to pd->idx.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
Partial packets in the RX buffers cause the subsequent packet to be
treated as malformed. The RX buffer can have partial data if the sender
is too slow in sending the packet of if there is an interruption in
transmission mid-way.
To avoid any issues due to such partials, flush the uart channel before
sending the command/response.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
The log lines in CP and PD had a prefix such as "CP: " and "PD: " that
does not add too much value as a given device an either be CP or PD
only. This patch removes those and enhances some other log lines while
at it.
It also adds a enum for return values throughout the module to improve
code quality.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
The dai.h interface does not prohibit calling dai_config_get()
with different direction values. The dmic driver should handle
invalid direction value explicitly and not rely on an assert.
Link: https://github.com/thesofproject/sof/issues/6896
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Return specific fault reasons instead of the generic
`K_ERR_CPU_EXCEPTION`, which provides minimal debugging aid.
Fixes#53093.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Define the index where arch specific faults start. This is a specific
number to avoid arch specific fault values changing each time a new
generic fault is added.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This allows enum values to be referenced in architecture `arch.h` files
without circular dependencies.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
We want to be able to have platform or architecture extra configs
without having to duplicate a whole section of the test specification.
This adds support for namespacing of extra configs, for example:
arch:nios2:CONFIG_SYS_CLOCK_TICKS_PER_SEC=1000
or
platform:qemu_x86:CONFIG_FOO=y
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use a flag to report a protocol error to the states. This keeps
state specific actions in the state. Currently, those state
specific actions are handled in the pe_report_error function.
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
Add CONFIG_USBC_CSM_SINK_ONLY=y to Sink's sample prj.conf.
This selects the Sink only Connection state machine
for the Sink sample and it explicitly show the user
of the Sink sample how the connection state machines are
selected.
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
Add interrupt and DMA tests for GD32 boards.
Use overlay-gd32-spi-interrupt.conf when testing interrupt based transfer,
use overlay-gd32-spi-dma.conf when testing DMA transfer,
Add overlay file for GD32 boards for these tests.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Periodic enqeueu of buffers can cause a attempt to start
a new transfer even though an endpoint is already busy.
Split usbfsotg_xfer_start() into two function, one to start
next transfer and another to continue the transfers, and use
busy state flags to explicitly mark an endpoint busy.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Pending state flag was only used by the UDC nRF USBD driver.
With the introduction of busy state flag it is no longer needed
and can be removed.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Periodic enqeueu of buffers can cause a attempt to start
a new transfer to host even though an IN endpoint is already busy.
Use busy state flags to explicitly mark an endpoint busy.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The name and wording used in template can be misleading.
Use more accurate word instance instead of device since
an implementation does not necessarily have to implement
a device (in the sense of Zephyr device model), and if it
does then devicetree should be used to describe number of
instances as in the case of CDC ACM implementation.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Fixes: #53696
Create a BOARD_REVISION_CONFIG setting to be consistent with the
BOARD_DEFCONFIG setting.
This allows systems which re-uses the Kconfig module to overrule the
file to be used as BOARD_REVISION_CONFIG in same way as is done for
the BOARD_DEFCONFIG file.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Provide a Kconfig option to enable HW RX and TX checksum, which
can increase throughput performances.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The function checked several value, but the BAP spec does
not specify that these cannot be different from stream to
stream in the CIG. The function thus did nothing but needlessly
restrict the upper layers.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Previous commit dealing with cleanup (c304db56f1) was not taking
--prep-artifacts-for-testing into consideration. Fix this and make sure
we do cleanup when this option is enabled.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Set the name of binaries to be kept when doing device testing and ignore
unrelated subsystems using tags.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Have boards define what binaries should be kept for device testing. The
purpose of this is to reduce the amount of artifacts and just keep the
binaries needed for flashing a device, reducing the size of the final
payload.
A board can have twister keep multiple binaries needed for testing when
--prep-artifacts-for-testing option is used.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
