Adds the CAP Commander Change Microphone Mute procedure.
This procedure changes the microphone mute state on one or more
CAP Acceptors.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If we fail to join all nodes or solicit node multicast groups
when the interface is down, then there is no need to print an
error message. The groups are automatically re-joined when the
interface comes up.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
remove unnecessary condition for CONFIG_HAWKBIT_POLL_INTERVAL,
changes poll_sleep to be in seconds,
change type of sleep_time in hawkbit_update_sleep(), so the return
value of hawkbit_time2sec() is interpreted correctly.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
In addition to flushing the dcache, to ensure that the new code is
actually read by the CPU when loading an extension, the icache must
be invalidated as well.
Without this, some tests are failing in hardware because the CPU is
executing stale code from its instruction cache.
Fixes#70906 on arduino_giga_r1/stm32h747xx/m7.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Resolved a data race in shell.c by copying the user-provided
prompt-string into a private buffer within the shell, ensuring
proper synchronization with the shell-thread.
Fixes: #64972
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@verkada.com>
If user created the capture device using the API and not via
the shell, then the device name was not set. Use the default
capture device in this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The event NET_EVENT_CAPTURE_STARTED is generated when the
capture is enabled, and NET_EVENT_CAPTURE_STOPPED when capture
is disabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The net_capture_pkt() does not return information what happened
to the net_pkt because the packet was always cloned. With cooked
capture we can avoid the cloning in which case we need to know
the capture status in order to unref the packet if needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add support for capturing arbitrary data via the cooked mode (sll)
capture API. The actual packet capture is done using net_capture_data()
function, the packet capture infrastructure does not need any changes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow user to create a kitchen sink pseudo a.k.a any network
interface that one is only able to write to. This might seem
unnecessary, but it is possible to attach virtual network
interfaces on top of this pseudo interface. These virtual
interfaces could then process the data for example for
packet capture purposes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
For debugging purposes it would be nice to see the verdict
printed as a string instead of number.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add a recv callback to dummy API. After this it is possible to
receive data by a dummy network interface. This is only useful
if one attaches a virtual interface on top of the dummy one.
One such example is the cooked mode capture interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Change 'Hawkbit' and 'hawkbit' to 'hawkBit' wherever
makes sense, and a bit of touch ups here and there.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
This commit fixes an issue where due to inverted logic (static function
returned 0 on success but the caller expected true/false) the MLDv2
reports were silently dropped.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
Added a check for checking duplication when adding a source in the
broadcast assistant, as per requirement in BAP 6.5.4. It is not
permitted to add a source such that a combination of broadcast_id,
adv_sid and address type would result in same triple of values.
Added a recv_state struct to cache these values when read, and moved
past_avail and srd_ids into this as well.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Deprecate CONFIG_NET_TCP_ACK_TIMEOUT as it is redundant with the
combination of CONFIG_NET_TCP_INIT_RETRANSMISSION_TIMEOUT and
CONFIG_NET_TCP_RETRY_COUNT. The total retransmission timeout (i. e.
waiting for ACK) should depend on the individual retransmission timeout
and retry count, having separate config is simply ambiguous and
confusing for users.
Moreover, the config was currently only used during TCP handshake, and
for that purpose we could use the very same timeout that is used for the
FIN timeout. Therefore, repurpose the fin_timeout_ms to be a generic,
maximum timeout at the TCP stack.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add hostname changed printout to event monitor. As the name
says, it is generated when the hostname of the device changes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Starting with b1d24e425c (net: lwm2m:
device object: optionally store error list in settings), it was no
longer possible to build the code with coverage enabled when the
settings subsystem was disabled.
The build would fail with an error like this:
> subsys/net/lib/lwm2m/lwm2m_obj_device.c:262: undefined reference to
> `settings_name_steq'
This fixes#70923.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Add `gdb_q_packet` function to handle proccessing of query packets. Also
add `gdb_qsupported` function to serve as a single place to process and
respond to `qSupported` packets.
Signed-off-by: Robert Zieba <robertzieba@google.com>
Make the current gdb loop enum public under the name `gdb_loop_state`.
This will allow for extending the current stub with further
functionality in the future as new features will require control over
the loop state.
Signed-off-by: Robert Zieba <robertzieba@google.com>
According to the `RFC8415` the length of the DUID is at least 1 octet
up to 128 octets. Now a user can choose buffer length without the need
for source code modification.
Signed-off-by: Marcin Gasiorek <marcin.gasiorek@nordicsemi.no>
For BR/EDR L2CAP, if the function bt_l2cap_br_chan_send_cb
instead of bt_l2cap_chan_send is called, the ACL conn and
L2CAP chennel status will not be checked.
Check conn/channel status before sending data in
function bt_l2cap_br_chan_send_cb.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
eth_stats.h is using ethernet api but not including the header,
it must be working by luck in files that include it after
something else that includes ethernet.h, fix by just including it.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Change the receive workque name to "BT RX WQ" to distinguish it from the
receive thread, and the long workque one to "BT LW WQ" to make the
format consistent with the other Bluetooth threads.
On an nRF52 now "kernel stacks" looks like:
0x200016c8 BT RX (real size 448): unused 280 )
0x20001780 BT RX pri (real size 448): unused 224 )
0x200012c0 BT RX WQ (real size 2240): unused 1360 )
0x20001208 BT TX (real size 768): unused 408 )
0x20001130 BT LW WQ (real size 1344): unused 408 )
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Change the input callback function name to make it easier to identify
what it belongs to. This clears some ambiguity when observing the symbol
names corresponding to the function pointers in the callback section.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Users should be able to call fs_mkfs() manually even if FS_FATFS_MOUNT_MKFS
is disabled.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Instead of having a single config specifying the memory pool size for
variable-sized net buffers, have a separate one for TX and RX for better
configuration granularity when optimizing memory usage of the
application.
Deprecate the old configuration but use its value as a default (for now)
for the new configs. This will need to change when the config is
deleted.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
To wait for the asynchronous suspending work item to complete, a
combination of semaphores and events is used. First, the semaphore is
released, then the events are cleared (through the boolean argument to
k_event_wait), then events are awaited.
However, if the event flag happens to be set by the work handler in the
short time between k_sem_give and k_event_wait, it is then cleared by
k_event_wait and k_event_wait blocks forever waiting for the event.
Make sure that we clear the event flag before releasing the semaphore.
Signed-off-by: Marco Widmer <marco.widmer@bytesatwork.ch>
With CONFIG_BINDESC_BUILD_TIME_ALWAYS_REBUILD a re-run was called for
the entire project.
This can result in issues with the zephyr linker mechanism.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
There should be a particular defines which clarify the
use of that number. So, replacing numbers with defines
in wifi shell.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
Outgoing block-transfers now set the socket hint
to ONGOING as long as the BLOCK1/BLOCK2 header has
MORE flag set to true.
This means as only the last packet in the block-transfer
set the socket hint to LAST or ONE_RESPONSE.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Once Wi-Fi is associated few parameters like listen interval and
power-save mode cannot be changed. The state for association is
"ASSOCIATED" and not completed. Even after state transitions to
COMPLETE, it can still go back to other states, e.g., PTK/GTK renewal.
Fix the state check.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
If host is not reading RTT data (because there is no PC connection
or RTT reading application is not running on the host), thread will
stuck continuously trying to write to RTT. All threads with equal or
lower priority are blocked then. Adding detection of that case and
if host is not reading data for configurable period then data is
dropped until host accepts new data.
Similar solution is using in RTT logging backend.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
All implementations of random number generator where duplicating logic
for sys_rand32_get. Since this subsystem already has a logic to
generate random values of arbitrary size, we can generically implement
sys_rand32_get on top of that.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The gPTP is not suppose to be run on top of VLAN and the
earlier support was just for testing purposes. Remove VLAN
support now after the VLAN overhaul.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Print also network interface index together with the pointer value
in order to get more useful information what is going on in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Print information whether a multicast address is properly
joined to a multicast group when print addresses using
"net iface" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
As the interface type is always Virtual, no need to print it.
Print instead the name of the network interface as it is more
useful to the user.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
